Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Summerlin?
Gate installation in Summerlin typically runs $3,200 to $8,500 for the gate itself, plus $1,400 to $3,800 for automation if you’re adding an opener. A straightforward single-swing driveway gate with a LiftMaster or Linear operator usually lands near $5,000 to $6,500 here; a wide double gate on a steep Red Rock foothill lot with masonry pillars can climb past $12,000. Those ranges hold for most of 2026 because Steel, aluminum, and operator lead times have stabilized.
We give you an upfront price before a single bolt is turned, and most jobs are completed in a single visit once the gate is fabricated. Call (866) 623-9848 for a free estimate at your property and a square deal in writing.
Gate Installation Cost Breakdown (2026)
Here’s what the line items look like for a gate installation in Summerlin this year. Your exact numbers depend on width, material, operator brand, and how much site work the lot requires, but these ranges cover the majority of what we quote.
| Line Item | Typical Range (2026) | Notes |
|---|---|---|
| Single-swing driveway gate (steel) | $3,200 – $5,400 | 12 – 14 ft opening; powder-coated finish |
| Double-swing driveway gate (steel) | $5,800 – $9,500 | 16 – 24 ft opening; two leaves |
| Sliding gate (steel, cantilever or track) | $6,200 – $10,500 | Best on tight driveways; needs runway |
| Aluminum or ornamental low-iron gate | $4,500 – $11,000 | Lighter, rust-proof, higher material cost |
| Masonry pillars (per pillar) | $650 – $1,600 | Common front-yard standard in Summerlin |
| Automation / opener (single leaf) | $1,400 – $2,600 | LiftMaster, FAAC, Linear and others |
| Automation / opener (double leaf) | $2,100 – $3,800 | Dual operators or heavy-duty single |
| Safety loops, sensors, keypad, remotes | $350 – $1,100 | Required for safe, code-sound operation |
| Concrete footing / slab work | $400 – $1,800 | Higher on sloped lots |
| Electrical run and permit coordination | $500 – $1,900 | Varies with distance to power |
| Welding the frame + hang & alignment | included in gate price | The fit that makes the gate last |
The gate frame and hang are usually baked into the material price, but that’s where the craft lives. A gate that’s hung square on a real footing closes quietly for decades; one that isn’t starts dragging within a couple of summers. Everything above is settled upfront, before any work begins, so there’s nothing surprising on the bill.
What Affects Gate Installation Pricing in Summerlin
Two gates at the same width can cost very differently, and the reasons are mostly local. Here’s what moves the number up or down at most Summerlin properties.
- Material and weight. Galvanized steel is the workhorse. Aluminum and low-iron resist corrosion without paint upkeep but cost more per linear foot. Heavier gates need heavier operators, which adds to automation.
- Driveway width and slope. A wide double gate on a flat pad in The Ridges is a different job than a narrow single on a downhill lot off Hualapai Way, where grade makes ponding and footing tricky. Sloped driveways often require taller footings and a heavier operator.
- Automation brand and requirements. Different brands carry different motor strengths and control boxes. We’re trained and equipped on nine gate-automation brands, so the right operator is matched to the gate on the first visit, and the price reflects the fit rather than a guess.
- Masonry and landscaping. Summerlin’s HOA architectural review often prefers stone pillars and coordinated fencing. Adding two masonry pillars can add $1,300 to $3,200 and lengthen the schedule while stone is cut and set.
- Electrical and permitting. Distance from power to the gate is the biggest unpredictable line item. If the operator needs a dedicated circuit run, that’s a licensed electrician’s scope and pricing follows. Permits for the gate and automation are coordinated before work begins.
- Safety sensors and code. Modern automation requires entrapment-protection sensors and a safe reversal. These aren’t upgrades you can skip; they’re part of a code-sound install and are priced in.
Because Summerlin properties sit on everything from flat desert pads near TPC to graded foothill lots toward Red Rock, we look at the actual site before quoting. That’s how the range stays honest.
Why the Summerlin Climate Affects Gate Cost Over Time
Summerlin’s climate test is harder than most homeowners expect. Extreme summer heat, dry wind, and occasional monsoon-season wind gusts all work on a gate’s hardware. Powder coating and hot-dip galvanizing aren’t cosmetic choices; UV exposure here dulls a cheap finish and accelerates rust at weld points. Wind load on a tall, solid gate means heavier frames and stronger operators so the gate doesn’t twist or fight the motor on gusty spring afternoons.
We’ve seen gates installed by others a decade ago where the finish failed and the hinges seized not from bad metal but from a weld that trapped moisture. Getting it done right the first time is cheaper than fixing it after the fact. Steel that’s welded clean, sealed at the seams, and hung on the right footing ages gracefully in this climate.
Can You Install a Gate in Summerlin the Same Day?
Not usually for a full install. A custom driveway gate is fabricated to your opening, so most installations are scheduled over one to three visits. What we can do same day is the assessment and quote. Once the gate is on hand and the site is prepped, the physical hang is typically a single-visit job. Repair work is often same-day, which is a different scope from a new install.
Call (866) 623-9848 and a live person answers at any hour, every day. We’ll get the estimate on the calendar quickly and give you a real timeline before you commit.
How the Installation Process Works
Here’s what to expect, step by step, so you know exactly what you’re paying for.
- On-site assessment and free estimate. We measure the opening, check grade, discuss material and operator, and a written upfront price is in your hands with no surprises.
- Design and fabrication. The gate is welded to size, powder-coated, and fitted with hinges and hardware matched to its weight. This is where the craft shows up.
- Site prep and footing. Concrete footings, electrical, and masonry pillars are coordinated. We’ll confirm the schedule with you before anyone shows up.
- Hang and alignment. The gate is hung square, leveled, and adjusted so it swings or rolls smoothly without dragging.
- Automation and safety. The operator, sensors, and access control are installed and tested. The gate must reverse safely before the job is done.
- Walkthrough and 90-Day Done Right Promise. We show you how the gate and automaton work, hand over remotes and codes, and back the job in writing. The company stands behind it.
How to Save on Gate Installation
A few practical ways to keep the number down without cutting the wrong corners.
- Bundle gate and automation. Installing the gate and opener together usually saves on labor and scheduling versus doing one now and the other next year.
- Choose galvanized steel over aluminum if the HOA allows. Steel is the most economical choice that still holds up in Summerlin’s heat.
- Ask about the $50 Off Any Repair Over $250 offer if there’s existing gate hardware to fix alongside the new install.
- Get a second opinion on any written estimate. We offer a free second opinion on any written estimate, so you can compare apples to apples before signing.
- Take the seasonal tune-up. An $89 seasonal tune-up keeps the operator and hinges working longer, which is cheaper than a replacement motor.
- Use the senior and veteran discount. A permanent 5% discount applies to eligible customers, always.
Free estimates are the easiest place to start. Call (866) 623-9848 and we’ll put together real numbers for your gate.
Should You Repair or Replace an Existing Gate First?
If the current gate is bent, rusted through, or the operator is failing, it’s often cheaper to repair before committing to a new install. A hinge replacement or a motor service can buy years. But if the frame is twisted, the welds have failed, or the gate is undersized for the opening, a new install is the smarter long-term money. We’ll tell you which honestly. If you’re weighing both, our home page is a good place to see the full range of what we do.
Gate Installation Cost in Nearby Summerlin Neighborhoods
Within Summerlin, the number shifts a bit by neighborhood because of lot type, HOA requirements, and the standard finish. A few we see often:
- The Ridges and Red Rock foothills. Higher-end estates and sloped lots often mean wider double gates and masonry pillars, pushing installs toward the top of the range.
- Redpoint, Summerlin West, and the Paseos. Tighter HOA standards on color and finish; steel gates in a coordinated powder coat are common.
- The Trails, TPC, and Sun City Summerlin. Generally flatter lots and single gates; many installs land in the $4,000 to $6,500 range.
- Summerlin South near Hualapai Way. Mixed market with older homes where the gate may need a full replacement or just a refresh.
We focus on Summerlin and surrounding neighborhoods, so we know what the local HOA reviews expect and how the climate treats a gate over the years.
Contact Us for a Free Gate Installation Estimate
The written price is where every good job starts. Call (866) 623-9848 for a free estimate in Summerlin, and we’ll put a real number in front of you with no surprises. A live person answers, day or night. If you want to explore the fuller scope of what a custom gate can do, starting from our gate installation service is the practical next step, and our Gate Installation in Summerlin page walks through the details.
We’re an Ironworks Gate Co. company prepared to stand behind the work, and the 90-Day Done Right Promise backs every job in writing. Done right, and backed in writing.
Frequently Asked Questions
How much does a basic gate install cost in Summerlin?
A basic steel single-swing gate with automation in Summerlin typically runs $4,500 to $6,500. A bare gate without an opener starts around $3,200. Call (866) 623-9848 for an exact quote, free estimates available.
Is it cheaper to repair a gate or install a new one?
Repair is usually cheaper in the short term, often $200 to $600 for hinges, hardware, or minor motor work. A full install is the better value when the frame is bent or the operator is failing. We’ll give you an honest read before recommending either. Call for a free estimate.
Do I need a permit to install a driveway gate in Summerlin?
Most Summerlin installations require a permit coordinated with the local jurisdiction, and HOA architectural review is typical for anything visible from the street. We handle that coordination as part of the estimate, so you don’t have to chase paperwork.
What’s the best gate material for Summerlin’s heat?
Galvanized steel with a quality powder coat is the most durable and cost-effective choice for Summerlin’s climate, typically $3,200 to $9,500 depending on size. Aluminum and low-iron cost more but skip the repainting. Either is a solid choice.
Do you offer same-day estimates in Summerlin?
Yes, same-day estimate appointments are often available in Summerlin, and a live person answers the phone every day. Call (866) 623-9848 and we’ll get you scheduled quickly.
Does automation cost extra, and by how much?
Automation is an add-on, typically $1,400 to $3,800 depending on single or double gate and the operator brand. Installing the gate and automation together saves on labor. Call for a bundled quote.
What gate-automation brands can you service?
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That way the correct fix is made on the first visit, whatever is on the driveway.
What does the 90-Day Done Right Promise cover?
Every gate install is backed by a written, no-hassle guarantee for 90 days. If it’s not right, we come back and make it right. No arguing. Call (866) 623-9848 to get started.
Pricing reflects the Summerlin market as of 2026. Ironworks Gate Co. Summerlin offers free estimates – call (866) 623-9848.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson