Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Summerlin Homeowners
When a driveway gate stops working, the fix is usually more specific than it looks. A gate that drags, stalls halfway, or won’t latch is telling you something: a bent hinge, a tired control board, a post that has shifted in Summerlin’s shrink-swell soil. Our technicians have up to 13 years of experience and carry the tools and training to diagnose electric and automatic gate faults in a single visit. We service LiftMaster and FAAC automation across Summerlin, quote the price before any work begins, and back every repair with our written 90-Day Done Right Promise. Call (866) 623-9848 for same-day gate repair availability in Summerlin.

What Our Gate Repair Service Includes
Electric Gate Repair
Electric gates fail in predictable ways: a control board that no longer reads the safety loop, a transformer that’s dropped voltage, a limit switch that stops the arm short. Summerlin’s summer heat pushes control boxes past their rated temperature, and we open them all year with that in mind. We trace the fault with a multimeter, test the loop and safety edges, and replace only the component that’s actually failed. If the board is fine and the wiring isn’t, we tell you that instead of selling a new operator.
Automatic Gate Repair
Automatic gates that open on a remote or keypad but close inconsistently usually have a logic or safety-sensor problem, not a motor problem. When the photo-eye is misaligned by a quarter inch, the gate reverses or holds open, and homeowners read that as a motor failure. We service automatic operators from LiftMaster, FAAC, BFT and other makes, check the reversal test, and adjust the sensor alignment so the gate closes the way it should. If the operator is genuinely worn out, we’ll say so plainly.
Hinge & Post Repair
Sagging swing gates almost always come down to hinges and the posts they hang on. A gate that clears the ground at the latch side but scrapes at the hinge side has a worn hinge pin or a post that’s settled. Summerlin’s caliche-heavy soil holds water against steel posts, and we see corrosion at the base plate more than anywhere else on the gate. We replace hinge plates, reinforce post bases, and reset the gate so it swings free without dragging.
Gate Realignment
A gate that’s realigned to the driveway but not plumb will be back out of true within a season. We check plumb and level on both posts, measure the diagonal for racking, and correct the frame before touching the hinges. In Summerlin, the ground movement after monsoon season is enough to knock a tall estate gate out of alignment even when nothing’s broken. Realignment restores the swing, protects the operator from fighting a crooked gate, and stops the wear that leads to a bigger repair later.
Lock Repair
Gate locks fail because the latch stops meeting the strike cleanly, or because the keyed cylinder has seized from dust and heat. On keypad and magnetic locks, the fault is often in the power supply or the release mechanism rather than the lock itself. We repair mechanical and electric locking hardware, adjust the strike so the bolt seats without force, and test the release from inside and out. A gate that closes but doesn’t lock is not secure, and that’s a repair worth making promptly.
Weld & Rust Repair
Welds fail at the joints that take the most flex: hinge mounts, frame corners, and the bottom rail where water collects. Rust begins at the same spots, and in Summerlin the combination of intense sun and irrigation overspray speeds it up on ornamental iron and steel gates. We cut out rusted sections, re-weld them to structural standard, and treat and finish the repair so it matches the rest of the gate. Every weld we lay is backed by the 90-Day Done Right Promise.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Repair
We’re trained and equipped on nine gate-automation brands, and that range matters when a homeowner calls with a system a generalist won’t recognize. LiftMaster operators are common on Summerlin driveways, and we know their control boards, limit settings, and where the safety edge wiring tends to loosen. On FAAC arms we watch for the drive-gear wear that shows up as sluggish opening after a few hot seasons. When a Mighty Mule or BFT system calls for service, we’ve seen the failure points before we open the housing, which is why most repairs get done on the first visit.
Brand familiarity isn’t about loyalty to a label – it’s about diagnosing the right part the first time instead of guessing. We don’t sell equipment; we fix what’s already on your driveway, whether it’s a newer automatic operator or a gate hung decades ago on original steel hardware. Whether you have a LiftMaster, FAAC, Mighty Mule, BFT, or any other make on your gate, we can help. If the make and model aren’t obvious, our technician will identify it on arrival and explain what’s failing and why before any work begins.
Signs You Need Gate Repair Right Now
- The gate stops or reverses halfway. This is usually a safety sensor or limit-switch fault, and it will keep happening until it’s diagnosed. Ignoring it leaves the driveway open and puts strain on the operator every cycle.
- The gate drags or scrapes the ground. Drag means a hinge or post has moved, and continued use wears the gate frame and the operator motor at the same time. It’s a small repair now and a much larger one if the welds start to crack.
- The remote or keypad stops responding. When the gate won’t open from the car, the cause is often the receiver, the battery in the remote, or a control board that’s lost its programming. A quick diagnostic tells you which one, and it’s usually a single-visit fix.
- Visible rust at the hinge mounts or bottom rail. Rust spreads from these moisture traps into the structural joints. Catching it early means a weld repair; waiting means cutting out and replacing a whole section of the gate.
- The gate closes but doesn’t lock, or the latch won’t catch. A gate that doesn’t secure the property is doing half its job. Latch and lock faults are usually quick to repair once the cause is found.
Our Gate Repair Process – Step by Step
- 1
Call and describe the problem. A live person answers the phone 24 hours a day, 7 days a week. We ask what the gate is doing, what brand of operator is on it, and how long it’s been acting up, so the technician arrives with the right parts for the most likely fault.
- 2
On-site diagnosis. The technician tests the operator, checks the control board, walks the safety edges and loops, and inspects the hinges, posts, and frame for movement. For swing gates we check plumb and level; for electric gates we meter the power and signal path. The goal is the actual fault, not the first one that looks suspicious.
- 3
Written upfront price before any work. You get a clear quote that lists the parts and labor. Nothing gets turned, welded, or replaced until you’ve agreed to the price. That’s the square deal: the bill at the end matches the quote at the start.
- 4
The repair itself. Most jobs are completed in a single visit. Our technicians are background-checked and uniformed, and they work in your driveway the way they’d work in their own family’s.
- 5
Testing and the written promise. We cycle the gate, test the safety reverse, check the locks, and walk you through what was fixed. Every repair is covered by the 90-Day Done Right Promise – if it’s not right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Summerlin?
Gate repair in Summerlin generally runs $150 to $650 for the most common fixes, and the price is quoted and agreed before any work starts. A hinge adjustment or realignment typically falls at the low end, around $150 to $280. Electrical and control-board faults on an automatic gate usually land between $250 and $550 depending on the part. A weld or rust repair runs $200 to $450 depending on how much metal needs cutting out and re-finishing. Replacing a failed operator motor sits higher and is priced as its own job.

What moves the number: the brand and age of the operator, whether the fault is mechanical or electronic, access to the gate, and whether the post needs resetting. You avoid overpaying by getting the diagnosis right the first time and refusing a quote that doesn’t separate parts from labor. Our free estimate includes the diagnosis, a written line-item price, and a plain explanation of what’s failing. Active offers include $50 off any repair over $250 and a permanent 5% senior and veteran discount. Call (866) 623-9848 for an exact quote – estimates are free.
Gate Repair Near Summerlin – Our Service Area
We handle gate repair in Summerlin and the surrounding west-side communities, including Spring Valley, Las Vegas, and Enterprise. Response times run same-day for most calls, and we schedule around your availability. If you’re further out toward Henderson or North Las Vegas, we’ll give you a realistic window when you call rather than a promise we can’t keep. New to us? Start at our home page to see the full scope of gate work we do.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Repair in Summerlin
Gate repair is the diagnosis and fix of anything keeping a driveway or estate gate from opening, closing, locking, or swinging correctly – hinges, posts, welds, locks, and the electric or automatic operator. It’s different from installation, which is a measured and scheduled job. Most gate repair calls in Summerlin come down to a worn hinge, a misaligned safety sensor, or a control-board fault, and most are resolved in one visit. Call (866) 623-9848 to describe the problem and get an estimate.
Most repairs are completed in a single visit, usually within one to three hours depending on the fault. Hinge adjustments and lock repairs are typically under an hour; control-board swaps and weld repairs take longer. If a part has to be ordered, we tell you the timeline upfront rather than leaving it open. Call (866) 623-9848 for a realistic estimate for your gate.
Most gate repairs in Summerlin run between $150 and $650, with the price agreed before work begins. Simple realignments and hinge repairs sit at the low end; electrical faults and weld repairs sit higher. We give a written quote at the free estimate, and the final bill matches it. Call (866) 623-9848 for an exact quote – estimates are free.
Yes. We’re trained and equipped on nine gate-automation brands, including LiftMaster and FAAC, and can service what’s on your driveway. Our technicians know where each brand’s control boards, limits, and safety wiring tend to fail, which shortens diagnosis. Whether your operator is LiftMaster, FAAC, Mighty Mule, BFT, or another make, we can help. Call (866) 623-9848 to book service.
Yes – we offer same-day gate repair in Summerlin and take emergency calls around the clock, with a live person answering the phone 24 hours a day, 7 days a week. A gate stuck open is a security issue, and we treat it that way when scheduling. Call (866) 623-9848 and we’ll give you the soonest available window.
Every repair is backed by our written 90-Day Done Right Promise. If something we fixed isn’t right within 90 days, we come back and make it right – no paperwork, no arguing, no exceptions. That’s the Keystone Standard we apply to every job. Call (866) 623-9848 with any warranty question.
Clear the driveway on both sides of the gate so the technician can swing it fully and reach the operator housing. Have the remote or keypad code ready, note any recent changes in how the gate behaves, and secure pets. If you have a prior written estimate, bring it – we offer a free second opinion on any written estimate. Call (866) 623-9848 to confirm your appointment.
Schedule Your Gate Repair Service in Summerlin Today
Don’t wait for a dragging gate to turn into a cracked weld or a dead motor. Call Ironworks Gate Co. at (866) 623-9848 for same-day gate repair in Summerlin, with upfront pricing agreed before any work begins and every repair backed by our written 90-Day Done Right Promise. A live person answers around the clock. Estimates are free and there’s no obligation. We’ll be there when we say.
Written by the team at Ironworks Gate Co.