A Ironworks company - serving Summerlin, NV
Gate Parts & Welding in Summerlin, NV | Ironworks Gate Co. Summerlin

Gate Parts & Welding in Summerlin - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Trusted Gate Parts & Welding for Summerlin Homeowners

When a gate hinge shears or a post pulls loose, the whole entry stops working the way it should, and the gate starts to sag or drag on the driveway. Our technicians have up to 13 years of experience with gate parts and welding in Summerlin, from discreet courtyard gates in The Ridges to wide double-drive units up in Reverence, and a live person answers the phone here 24 hours a day. We repair, replace, and weld on site so most jobs are finished in a single visit. Call (866) 623-9848 and we’ll get a trained technician out to look at it.

Professional welder performing custom gate repair and metal fabrication in a shop in Summerlin, NV

Call (866) 623-9848

What Our Gate Parts & Welding Service Includes

Gate parts and welding cover the hard structure of the gate: the metal that holds the weight. When those parts wear, the gate sags, drags, won’t latch, or won’t swing true. Here is what we handle in Summerlin.

Hinge Replacement

Hinges carry the full weight of the gate leaf, and when they wear out the gate drops and drags against the ground or the post. In Summerlin’s dry heat, a hinge that has gone years without grease often seizes before it fails, and we see it on steel gates that face west into the afternoon sun. We cut out the worn hinge, weld a new one on square, and adjust the alignment so the gate swings free again.

Hinge Replacement

Post Replacement

A gate post that leans is usually underground, not up top: water gets into the footing or the steel rusts through at the grade line. Once the post is off plumb, no amount of hinge adjustment will keep the gate closing right. We remove the old post, set a new one properly, and reset the gate so everything lines up again from the frame down.

Post Replacement

Rail Repair

Rails are the horizontal bars that give the gate its stiffness, and a bent or cracked rail lets the whole leaf flex and twist. Impact damage from a car, a bike, or a hit from a delivery truck bends rails more often than you’d think. We straighten what can be straightened, cut out and re-weld what can’t, and match the finish so the repair doesn’t stand out.

Rail Repair

Custom Welding

Sometimes the right part simply isn’t made, or an older gate needs a bracket, an arm mount, or a reinforcement that no catalog sells. Our technicians weld on site and in the shop for the odd shapes that fit custom architecture. This is where the metalwork shows: a clean bead, ground smooth, primed and painted, so the repair looks like it belongs on the gate instead of bolted on late.

Gate Rollers

Sliding gates ride on rollers, and once those flat-spot or seize, the gate shudders and strains the motor trying to move it. Rollers take a beating in Summerlin because grit and dust work into the track and grind them down faster than back East. We replace worn rollers, true up the track, and check the motor isn’t working harder than it should be to do a simple slide.

Latch & Lock

A latch that doesn’t catch is a gate that doesn’t secure, and it usually comes down to a worn striker, a dropped gate, or a lock that has corroded shut. We repair and replace latches and locks, from manual thumb latches to keyed and electronic units, and make sure the gate lines up so the latch grabs cleanly every time.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 623-9848

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Brands We Service for Gate Parts & Welding

We service LiftMaster operators and know where they wear: the drive gears and the limit switches are usually the first to show age, and a gate that drags or binds will kill a LiftMaster motor faster than almost anything else. That means when we fix the metal, we also think about what that metal is doing to the opener. We work on Mighty Mule and FAAC equipment too, and we know the mounting hardware on each one well enough to know when a sagging gate is fighting the arm instead of the other way around.

Every brand wears in its own spot, and knowing those spots is how we get to the real problem on the first visit. Whether your gate runs a LiftMaster, a Mighty Mule, a FAAC, or a brand we haven’t named here, we can help. The gate and its parts come first, and the motor follows.

Signs You Need Gate Parts & Welding Right Now

  • The gate sags or scrapes the ground. A gate that drags on the driveway is telling you a hinge or a post has moved, and grinding it along the concrete only makes the repair bigger. Catch it early and it’s often a hinge job; wait and it becomes a post and frame job.
  • A hinge or bracket is cracked or bent. Cracks in weld joints or bent hinge plates are structural, and a gate under motor power can tear a tired bracket clean off the post. If you can see a crack, it needs welding sooner rather than later.
  • The gate won’t latch or lock. A latch that misses means the gate is out of alignment, and a gate that won’t stay shut is a security gap that widens over time. This is one of the easiest things to fix when it’s caught early.
  • Rust streaks or flaking paint at the joints. Rust blooming out of a weld or hinge is the metal thinning from the inside, and Summerlin’s dry climate won’t stop it once it starts. A little grinding, welding, and repaint now beats replacing the whole leaf later.
  • The gate shudders or drags on its track. Flat-spotted rollers or a fouled track make a sliding gate jerk and strain, and that strain passes straight into the motor. New rollers and a trued track are usually a quick fix that saves the opener.

Our Gate Parts & Welding Process – Step by Step

  1. 1
    We look at the whole gate, not just the broken part. A technician checks the posts, hinges, frame, rollers, and the opener together, because a hinge problem is often a symptom of a post that moved. We check plumb and level with a level and a square, and we watch the gate open and close under power so we see the drag that doesn’t show when it’s standing still.
  2. 2
    We give you the price before we touch a bolt. You get a written upfront price for the parts and the welding, and we explain what needs fixing now and what can wait. No surprises on the bill, because the price is settled and agreed before any work starts.
  3. 3
    We do the repair on site. Our technicians cut, weld, grind, and fit new parts right at your gate, and they cover the surrounding concrete and stucco so your driveway and entry stay clean. Every weld is ground smooth and primed and painted so it holds up.
  4. 4
    We test the gate through a full cycle. After the metal is fixed, we open and close the gate several times under power, check the latches and rollers, and confirm the opener isn’t straining against a gate that’s still out of true. If the motor needs attention too, we’ll tell you rather than leave it to fail later.
  5. 5
    We back it in writing. Every job is covered by our 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no paperwork and no arguing. That’s the Keystone Standard, and it applies to every gate job we do in Summerlin.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Parts & Welding Cost in Summerlin?

Gate parts and welding in Summerlin typically run $150 to $450 for a hinge, roller, or latch repair, and $400 to $1,200 or more when a post gets replaced or a rail is rebuilt. A single hinge replacement is usually the low end; a bent rail that needs cutting and re-welding sits in the middle; and a full post replacement with a new footing is the high end, especially on heavier double gates.

A few things move the price. The type of metal matters, since welding galvanized steel or aluminum takes different technique and prep than plain steel. Post replacement costs more than a hinge because it involves the footing and resetting the whole gate. Gate weight and width matter too, and so does how much the old part has corroded into the frame. Custom welding for an odd bracket or a repair no catalog part fits is quoted per job once we see it.

Professional welder using an angle grinder for metal gate repair services in Summerlin, NV

The way to avoid overpaying is to get the price in writing before anything is cut or welded, which is how we work anyway. Our free estimate covers the parts, the welding, and the labor, and we’ll tell you plainly if a repair isn’t worth it and a replacement is the better move. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and a 5% senior and veteran discount.

Repair Typical Summerlin Price
Hinge replacement $150 – $350
Latch & lock repair $150 – $300
Gate rollers (set) $180 – $400
Rail repair or re-weld $250 – $600
Post replacement $400 – $1,200+
Custom welding Quoted per job

Call (866) 623-9848 for an exact quote on your gate. Estimates are free.

Gate Parts & Welding Near Summerlin – Our Service Area

We handle gate parts and welding for homeowners across Summerlin and the surrounding valley, including Spring Valley, Las Vegas, and Enterprise. Most Summerlin calls are scheduled within a day or two, and we give you a window we actually keep. If you’re further out toward Henderson, Boulder City, or Sandy Valley, we’ll tell you the soonest we can get there. You can see the same work we do in gate parts and welding in Spring Valley and gate parts and welding in Las Vegas.

Serving Summerlin, NV – Our Local Coverage Area

We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Gate Parts & Welding in Summerlin

Schedule Your Gate Parts & Welding Service in Summerlin Today

A sagging gate or a cracked hinge won’t fix itself, and the longer it drags, the more it costs. Call Ironworks Gate Co. at (866) 623-9848 for a free, no-obligation estimate on gate parts and welding in Summerlin. A live person answers 24 hours a day, the price is agreed before any work starts, and every job is backed in writing by our 90-Day Done Right Promise. We’ll be there when we say.

Written by the team at Ironworks Gate Co.

Why Summerlin Chooses Ironworks Gate Co. Summerlin

We set the standard for gate parts & welding in Summerlin.

30-60 Min Response

Fast dispatch across Summerlin. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Summerlin

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Summerlin - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Summerlin Customers Say

Trusted by homeowners across Summerlin and surrounding areas.

★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez
★★★★★

"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."

Erin Sutton
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson

Ready for Gate Parts & Welding in Summerlin?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Summerlin.

(866) 623-9848

Request a Free Estimate in Summerlin

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch