Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair Cost in Summerlin, NV: What You’ll Actually Pay
Most automatic gate repair in Summerlin runs $150 to $450 for common fixes like a seized operator chain, a misaligned track, or a failed sensor. Motor replacement pushes it to $500 to $900 depending on the brand, and a full structural re-hang plus a new motor lands at $1,000 to $1,800. Before you get a quote, know which failure you’re facing. Call (866) 623-9848 for a free estimate with your full scope settled before a single bolt turns.
The summerlin detail every price guide misses: caliche grit
When a Summerlin homeowner calls us about a “slow gate,” we usually find the same thing: an operator chain packed with fine caliche dust blowing off Red Rock and the open lots along the 215. That grit is abrasive. It works into the track, the rollers, and the chain, and it wears the moving parts down faster than moisture ever would in a wetter climate. Catch it early with a clean-and-lube and you’re looking at $150 to $300. Let it grind a season or two and it seizes the mechanism, burns the motor, and the bill jumps to $600 to $1,100.
The difference between those two outcomes is a technician who knows the difference between mechanical wear and grit-induced seizure. Misread it as a worn motor and you’ll pay for a motor you didn’t need. We’ve built our Summerlin gate work around that distinction, which is why our crews train on nine operator brands. That’s how we make the right call on the first visit rather than returning with the wrong part.
The cost ladder: where your gate sits right now
Automatic gate repair isn’t one price. It’s a ladder, and each rung has clear signs. Here’s how we think about it, and what each step costs in Summerlin.
| Repair tier | Typical Summerlin cost | Signs you’ve reached it |
|---|---|---|
| Track clean-and-lube + adjustment | $150 - $300 | Gate moves slowly, grinds, or hesitates at one point; visible grit in tracks and chain |
| Control board or sensor replacement | $200 - $450 | Gate opens partway, reverses for no reason, or a safety sensor fails intermittently |
| Motor replacement | $500 - $900 | Operator hums but won’t move, trips the breaker, or has burned after unaddressed strain |
| Structural re-hang + new motor | $1,000 - $1,800 | Gate drags, sags off a hinge weld, or the path is misaligned enough to overload any motor |
Notice the clean-and-lube line. Generic price guides never list it, but every honest operator repair in Summerlin requires it. Add it to whatever repair you actually need and you have a more accurate number. Skip it and you’ll be back within a year.
Why a “motor problem” is often a hinge problem in disguise
Summerlin gates are mostly rolled, decorative wrought iron and steel, not wood. That’s good material, but it moves. A Summerlin summer pushes past 100°F, and metal that heat-cycles day after day stresses hinge welds and shifts the gate’s travel path. Once the path is off, the motor fights the gate every cycle. It overworks, heats up, and fails. The homeowner calls about the motor. The real culprit is a $200 hinge or weld repair that was ignored a few seasons too long.
That’s why our crews check the gate’s swing and the hinge welds before we ever touch the operator. Fix the geometry and a tired motor often keeps running. Call Gate Repair when the gate drags, and we’ll tell you which part is actually failing.
What we bring to a Summerlin gate call
We service nine operator brands, including Viking, Ghost Controls, DoorKing, and Elite, and we stock parts for all of them on the truck. That’s what turns a job into a single visit instead of a return trip that doubles your labor cost. Round trips are where gate repair bills quietly balloon.
Your price is settled before work starts. You approve the full scope up front, so there’s no “we found something else” mid-job. Most jobs finish on the first visit, and every one is covered by our 90-Day Done Right Promise: a written, no-hassle guarantee. If it’s not right, we come back and make it right.
Common Summerlin gate repair scenarios
This is the work we see week in and week out across The Ridges, Red Rock Country Club, The Trails, and The Crossing:
- The gate grinds and hesitates. Usually grit in the track and chain. Clean, re-lube, adjust. $150 to $300, and it stops the wear.
- The gate reverses for no reason. A safety sensor sending a bad signal. Board or sensor repair, $200 to $450.
- The gate sags and drags. Heat-cycled hinge welds and a shifted path. Fix the hinge before the motor burns out.
- The gate won’t move at all. The motor has likely given out after months of fighting a misaligned gate. Motor replacement runs $500 to $900 by brand.
- The gate closes crooked after a windstorm. Spring Mountains gusts throw wind load onto a loose gate. A structural re-hang is often the fix, $1,000 to $1,800 with a new motor.
One more Summerlin wrinkle: because so much of the community was built under developer standards and HOA CC&Rs, any repair that changes the gate’s panel design or visible finish has to stay compliant. A mechanically sound replacement in the wrong finish can still draw an HOA notice. We keep the original design intact wherever we can.
How we diagnose before we quote
Getting the price right starts with getting the diagnosis right. Here’s how a call with Ironworks Gate Co. Summerlin runs:
- You call (866) 623-9848 and speak with a live person, any hour.
- We ask what the gate is doing: slow, grinding, reversing, dead. Those answers narrow the likely rung.
- On site, we check the tracks for grit, the hinges for heat stress, and the operator for strain.
- We connect the gate’s travel path to the operator so we know whether the motor is the cause or the casualty.
- You get the full scope and price up front, and approve it before we start.
- We finish on the first visit wherever parts allow, and back it with the 90-Day Done Right Promise.
- You leave with the fix done right and a gate that closes the way it did the day it was hung.
We stand behind the diagnosis because we test before we quote, not after. If you want to see the full range of what we handle, visit our home page.
Key takeaways
- Most Summerlin auto gate repairs cost $150 to $450; motor replacement runs $500 to $900; a full re-hang plus motor is $1,000 to $1,800.
- Grit from Red Rock and the 215 is the leading cause of operator failure in Summerlin, and a clean-and-lube step ($150 to $300) prevents most of it.
- Heat-cycled iron warps the gate path, which overloads the motor. Fix the hinge before you buy a motor.
- We stock parts for nine brands and finish most jobs in one visit.
- Price is settled before work starts, backed in writing by the 90-Day Done Right Promise.
FAQs
Most automatic gate repairs in Summerlin cost $150 to $450 for common issues like grit-seized chains, misaligned tracks, or sensors. Motor replacement runs $500 to $900, and a full structural re-hang with a new motor is $1,000 to $1,800. Call (866) 623-9848 for an exact quote, and your estimate is free.
Often yes, because we stock parts for nine operator brands on the truck. Most Summerlin jobs finish on the first visit when the parts are on hand. Call (866) 623-9848 and we’ll tell you what today looks like for your gate.
Repair is almost always cheaper unless the gate’s structure itself has failed. A $200 to $450 repair beats a $1,000 to $1,800 replacement in most cases. We’ll give you the honest call, and a free second opinion on any written estimate you already have.
Grit from Red Rock and the 215 packs into your tracks and chain, and the heat stress on iron shifts the gate path. Together they overload the motor. A clean-and-lube plus a hinge check each season solves it. Call (866) 623-9848, and ask about our $89 seasonal tune-up.
When your gate starts grinding, dragging, or stalling, the cost of waiting climbs fast. Ironworks Gate Co. Summerlin settles an upfront price before we touch a bolt, stocks parts to finish the job in one visit, and backs the work in writing. Call (866) 623-9848 for a free estimate. Senior and veteran discount available 5%.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin, NV.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson