Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Las Vegas, NV
We provide independent Mighty Mule gate repair across Las Vegas, and we do it on symptom first, replacement second. What makes our Mighty Mule work different here is heat and sand: the sealed control box cooks on a 105°F afternoon, the slide track packs with wind-blown dust, and both failures land in the same week across whole streets of HOA gates. One honest note up front: Ironworks Gate Co. Summerlin is an independent service provider, not affiliated with or authorized by the manufacturer.

We’re trained and equipped on nine gate-automation brands, so if your Mighty Mule operator is beyond saving, we’ll tell you straight and quote a replacement. Prices are settled before a bolt is turned. Call (866) 623-9848.
Why Las Vegas Residents Choose Us for Mighty Mule Service
We know the Mighty Mule line from the inside. The MM260 and MM272 single-swing openers, the MM360 and MM371W dual-swing units, and the FM600, FM700 and MM-SL slide operators all show up on driveways across the northwest valley, and we troubleshoot them on their actual symptoms instead of selling a new system first. Independence matters here: no manufacturer quota means we can put an OEM board or arm on when the housing and motor are sound, and quality aftermarket parts where OEM pricing runs out of line.
Our technicians have up to 13 years of experience, and every Mighty Mule job in Las Vegas is covered by our written 90-Day Done Right Promise. Live phone support answers around the clock, so a gate that jams on a Saturday gets a person, not a voicemail tree. Browse the wider Mighty Mule service scope we cover, or call and describe the noise your operator makes.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Mighty Mule Gate Repair Problems We Solve in Las Vegas
- Heat-soaked control boards. The sealed Mighty Mule control box sits in direct desert sun, and sustained weeks over 105°F cook capacitors and relays. The arm still runs, but the board stops accepting commands or the limits drift a few degrees every cycle.
- Sand-packed slide tracks and rollers. Wind-driven dust packs the track on FM-series operators until the motor stalls and strips the gearbox instead of tripping out. This is the single most common callout after a dust storm.
- Sagging swing arms and worn bushings. Expansive caliche soil moves after monsoon downpours, the post shifts, and the MM260-class arm goes out of geometry. The gate binds mid-swing and the operator over-torques fighting it.
- Battery and solar-charge failures. Mighty Mule battery-backup units lose capacity fast in sustained heat. The gate opens once on a charge and stalls on the second cycle, and solar-assisted units fall further behind every month.
- Gearbox wear and stripped drive gears. Years of grit in the operator gears, combined with dry hinges, turns a cheap-looking repair into a stripped gearbox. We open it, show you the wear, and quote the honest fix.
Mighty Mule Service in Las Vegas: What Local Conditions Mean for Your Equipment
Here’s a pattern you won’t see described on a generic brand page. In the northwest valley ZIPs 89134 and 89144, HOA entrance gates tend to fail in the same week, because every operator on the street sits in an identical metal box and cooks on the same 105°F-plus days. When one Mighty Mule board or backup battery gives out after a heat wave, it’s rarely one house’s problem. Neighbors call one after another, and the failure mode repeats down the block. That’s why we ask which street you’re on before we diagnose: identical housing stock, identical sun exposure and identical slides are a rapid way to know which parts to load out. If your gate buzzes, stalls halfway, or opens once and won’t close on battery, call (866) 623-9848 and we’ll tell you what the pattern suggests.
Mighty Mule Models & Products We Service in Las Vegas
We service the MM260 and MM272 single-swing openers, the MM360 and MM371W dual-swing openers, and the FM600, FM700 and MM-SL slide operators, plus their remotes, keypads and safety edges. Parts are matched to the unit, not ordered off a shelf: we test the board’s command behavior and limits, load-test the battery, and inspect the track and hinge points before deciding what goes on the job. OEM Mighty Mule boards, arms and gearboxes go on when the housing and motor are sound. Quality aftermarket batteries, rollers and hinges go on where OEM pricing is out of line and the aftermarket part holds up to the heat. Nothing sits on a truck as stock.
Mighty Mule Service Pricing in Las Vegas
Most Mighty Mule repairs here land in a predictable band. A diagnostic and adjustment visit is typically $95 to $150, a control board replacement runs $340 to $480, gearbox and drive-train work runs $380 to $620, battery and solar-charge service runs $180 to $320, and slide-track clearing, roller replacement and re-grease runs $180 to $340. A swing-arm realignment or post correction on the MM260 class runs $260 to $450. The typical job is a gate that ran fine last season and now buzzes, stalls halfway, or opens once and won’t close on the backup battery; a qualified local pro clears and re-greases the track or hinge points, tests the board’s limit and command behavior, load-tests the battery, and replaces only the failed board, gearbox or battery rather than the whole operator. Every price is quoted and agreed before work starts.
Call (866) 623-9848 for an exact quote. Estimates are free.

See the difference
Before
After
Before
After
Before
AfterServing Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Las Vegas
A heat-degraded backup battery is the likeliest cause. Sustained heat above 105°F cuts capacity fast, so the unit has enough reserve for one cycle and not the next. A load test confirms it. Call (866) 623-9848 for an exact quote.
Usually not. A humming motor that won’t move points to a sand-packed track and rollers forcing it to over-torque, which is exactly what wind-driven desert dust does to FM-series operators. Clearing the track and checking the gearbox for stripping tells you whether the motor is fine.
Boards cooked by heat usually justify repair on an otherwise healthy operator: we replace the failed board rather than the whole unit. A rusted, bent-arm unit with a dead motor is honestly a replace conversation, and we’ll tell you so plainly.
Most often the post moved. Expansive caliche soil shifts after monsoon downpours, throwing the swing arm out of geometry so the gate binds mid-swing. Realignment at the hinge and post corrects it; replacing the operator won’t.
Yes. The sealed control box needs shade or relocation where possible, the battery needs periodic load testing ahead of summer, and the electronics deserve an inspection before the first 105°F week rather than after. Our $89 Seasonal Tune-Up covers exactly that. Call (866) 623-9848 to schedule one.
Service Areas Near Las Vegas
We serve Mighty Mule owners throughout Las Vegas and the surrounding valley: Summerlin, Spring Valley, Enterprise, Winchester and North Las Vegas. If your driveway gate is on a Mighty Mule operator anywhere in these communities, we can help. Learn more about our full Las Vegas service area.
Book Your Mighty Mule Service in Las Vegas Today
When your Mighty Mule gate buzzes, stalls, or won’t close on battery, we can usually see it the same day. Same-day and emergency service across Las Vegas, a live person on every call, and a written 90-Day Done Right Promise on every job. Call (866) 623-9848 for a free estimate.
Key Takeaways
- Independent Mighty Mule repair in Las Vegas, not authorized or manufacturer-affiliated.
- Heat-soaked boards and sand-packed tracks are the two top failure modes here.
- Prices quoted upfront before any work begins.
- Same-day availability and a written 90-Day Done Right Promise.
- Call (866) 623-9848.
Written by the team at Ironworks Gate Co.