Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Henderson, NV
We provide independent Mighty Mule gate repair across Henderson, NV, from the original mid-century blocks in 89015 to the newer subdivisions out in 89052. What makes our Mighty Mule work different here is Henderson’s HOA culture: in Anthem, Seven Hills, and the MacDonald Ranch corridor, the operator fix often has to satisfy an architectural committee as much as it has to satisfy the gate. We’re not affiliated with or authorized by Mighty Mule; we’re a repair shop that knows the equipment and the neighborhoods. Call (866) 623-9848 and a live person answers, day or night.

Why Henderson Residents Choose Us for Mighty Mule Service
Mighty Mule is homeowner-grade equipment, and that changes how it should be serviced. These operators live on driveways all over Henderson, and they were never built to be babied. They’re built to be fixed. We know the FM and MM swing lines and the slide units well enough to hear a symptom and name the likely part before we open the housing.
Our technicians have up to 13 years of experience on gate automation, and we’re trained and equipped across nine major brands, so the correct fix gets made on the first visit whether your driveway runs a Mighty Mule or something else. We use OEM-compatible parts where they’re still available and vetted aftermarket parts where OEM has been discontinued or priced out of proportion to the gate’s condition. Every job is backed in writing by our 90-Day Done Right Promise, and pricing is settled before a single bolt is turned. That’s how we work in Henderson, and it’s the same on the 400th job as the first.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Mighty Mule Gate Repair Problems We Solve in Henderson
- Control-board and battery failure on FM and MM swing operators. Years of 110 – 120°F cycling in a garage or attic cooks the board and drains the battery. The symptom is a gate that opens partway, reverses, or dead-stops with a blinking diagnostic LED. Those LED codes are the fastest way to tell a board problem from a battery problem.
- Sagging cantilever and hinge-side gate leaves. Henderson’s desert-iron driveways are heavy, and a leaf that sags a quarter inch overloads the opener’s arm and clutch. The operator trips on obstruction even though the board is fine. Fix the hinge and post first, or the new board fails the same way.
- Solar and battery-backup units that won’t hold a charge. Single-digit humidity and constant sun work against a solar-charged Mighty Mule setup. The gate works fine at midday and quits after sundown. That’s a charge problem, not an operator problem.
- Monsoon-undercut or heaved posts in expansive soil. Henderson’s rare but real monsoon downpours heave gate posts set in the area’s expansive desert soils, which knocks the operator out of alignment and strips the arm and limit cams on swing and slide models. This is the one that looks like an electrical failure and isn’t.
- Voltage drop on older 120V runs. Original low-voltage iron gates on 1990s and 2000s builds often sit on wiring past its service life. The operator tests fine at the board but won’t run reliably under load. We check the run, not just the control box.
Mighty Mule Service in Henderson: What Local Conditions Mean for Your Equipment
Here’s the thing about Mighty Mule repair in Henderson that a generic page won’t tell you: in Anthem and Seven Hills, many of these operators are original to 2000s builds, and the 120V runs feeding them are now well past their service life. A gate can test fine at the board and still be a wiring or voltage problem, and the HOA’s approved-style ironwork makes a re-run harder than it looks because you can’t just change the landscape to accommodate new conduit. So a technician working in these neighborhoods needs paint-matching chips and replacement control boards as often as hardware. The correct diagnosis is voltage and board first, iron and posts second, and the honest answer is sometimes that the original build is what needs attention, not the Mighty Mule unit on top of it.
Mighty Mule Models & Products We Service in Henderson
We service the full Mighty Mule line you’ll actually find on Henderson driveways: the FM series single-swing automatic openers (FM350, FM500, FM600), the MM series swing openers (MM260, MM360, MM560, MM572), and the slide gate operators (MM371W, MM571W). That includes solar and battery-backup accessory kits and the wireless keypads and remotes paired to them. We use Mighty Mule OEM control boards, arms, limit switches, and battery harnesses where they’re still available, and vetted aftermarket arms and batteries where OEM has been discontinued or priced out of proportion to the gate’s condition. Parts are sourced per job and per model; we don’t claim a local stockpile, and we won’t tell you a part is on a shelf when it isn’t. If the iron, posts, and 120V run are sound, repairing your Mighty Mule operator is usually the right call. If the gate itself is failing, replacing the operator alone masks the real problem, and we’ll tell you that plainly.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Henderson
Mighty Mule gate repair in Henderson typically runs $185 – $420 depending on what fails. A battery and solar-charge diagnosis is usually $150 – $220. A control-board replacement runs $220 – $380 parts and labor. Realigning or re-hanging a sagging gate leaf sits at $180 – $350, and a post reset or re-anchor on a heaving post runs $300 – $650. What drives the cost is the part, the model, and whether the gate iron has to be corrected before the operator will work right. Every price is quoted and agreed before any work starts. No surprises on the bill. Call (866) 623-9848 for an exact quote; estimates are free.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Henderson
It’s the battery more often than the board, and the blinking diagnostic LED on the operator will tell you which. Heat-aged control boards fail too, especially on FM and MM units that have lived through a dozen Henderson summers. A qualified tech tests both before swapping either. Call (866) 623-9848 for an exact quote; estimates are free.
Yes. The operator is chosen by the weight and swing of the gate, not by the HOA. The style requirements in Anthem and Seven Hills affect the iron and the finish, not the automation, so a Mighty Mule swing or slide operator is compatible as long as it’s sized correctly for the gate leaf.
It’s almost always a solar-charge or battery-backup issue. Single-digit humidity and constant sun drain the charge faster than a tired battery can recover, so the gate works midday and quits after dark. It’s a charging problem, not an operator problem, and it’s usually the cheapest of the repairs. Call (866) 623-9848 for an exact quote; estimates are free.
Usually, yes. The post gets reset and re-anchored in the expansive desert soil, the hinge side gets corrected, and the operator is realigned so the arm and limit cams line up again. That’s often a third of the cost of a new operator, and it fixes the cause instead of masking it.
We source OEM Mighty Mule boards and batteries where they’re still available, and vetted aftermarket parts where OEM has been discontinued. Parts are ordered per job by model. We won’t tell you a part is in a truck or in a local warehouse when it isn’t, and we won’t quote a part we can’t get. Call (866) 623-9848 for an exact quote; estimates are free.
Service Areas Near Henderson
We also handle Mighty Mule work in Boulder City, Whitney, and the neighborhoods around our Henderson service area. If you’re just outside the ZIPs we cover, call and ask. We’ll tell you straight. For the full range of what we do, see our Mighty Mule service overview, and if you’re in Anthem or Seven Hills we’ll flag any HOA-approved style issue before we start.
Book Your Mighty Mule Service in Henderson Today
A typical call is a 2000s-era Henderson swing gate on an original Mighty Mule FM or MM operator that opens partway, reverses, or quits after sundown. If that’s your gate, call (866) 623-9848. Same-day service is available for repairs in most of Henderson, and every job is backed in writing by our 90-Day Done Right Promise. Upfront pricing settled before we start. A live person answers, 24 hours a day, 7 days a week.
Written by the team at Ironworks Gate Co. Summerlin.