A Ironworks company - serving Summerlin, NV

FAAC Gate Installation in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

FAAC Gate Installation in Summerlin: What to Know First

We provide independent FAAC gate installation in Summerlin, and most single-gate installations we schedule are measured, ordered and finished within one to two weeks of the site visit, depending on the operator model and whether the driveway is ready. Pricing is quoted in writing before any work begins, and we tell you plainly when a repair will serve you better than a full replacement. If you own a FAAC 391, 400, 402, 422, 740 or S800 operator and your gate needs new automation, call (866) 623-9848 for a free estimate.

Two professional contractors installing a new black metal gate. in Summerlin, NV

Call (866) 623-9848

This page is for Summerlin homeowners who already own FAAC equipment or whose gate builder specified it, and who want the installation handled by technicians who work on FAAC systems regularly rather than learning on your driveway. We’re an independent FAAC service provider, not authorized by FAAC, and we say so upfront.

Key Takeaways

  • FAAC is a European residential and light-commercial line – fittings, terminals and manual-release hardware differ from the big-box brands.
  • Summerlin’s heat and the Red Rock dust load change which FAAC models hold up best on an exposed driveway.
  • Installation is scheduled work, not same-day dispatch – your free measurement and written quote come first.
  • Every installation is covered by our written 90-Day Done Right Promise.

How FAAC Products Fail – and How We Fix Them

FAAC operators are reliable when they’re installed to spec, and most of the failures we see in Summerlin trace back to the original installation rather than the motor itself. Here are the patterns our technicians run into, model by model.

  • FAAC 391 and 390 swing operators: arm geometry set by eye. On these articulated-arm swing operators, if the mounting bracket or arm angle is off by even a little, the motor strains through every cycle, the control board logs torque faults and the operator burns out early. We set the geometry against FAAC’s published measurements, not a tape-and-guess approach, and we check the gate swing itself for bind before the operator goes back on.
  • FAAC 740 and 741 sliding operators: undersized foundation and rail misalignment. These sliding operators need a level, solid concrete pad and a rack that engages the pinion cleanly along the whole travel. On Summerlin’s shrink-swell soil, a pad poured too thin or a rail set against a settling gate post causes the pinion to grind and the motor to overheat. We check pad thickness, rack pitch and gate tracking before the operator is commissioned.
  • FAAC S800 and 402: limit and encoder faults after voltage dips. When the operator’s travel limits and encoder reference drift after a power event or a battery-backed board losing memory, the gate stops short or reverses on its own. We re-teach the limits and confirm the safety edges and photo-eyes are wired to the correct terminals for that board revision.
  • FAAC 422 and 400: manual-release and lock hardware seizing. The manual release key and the electric lock on these residential swing operators seize in our dry, dusty climate if they’re never exercised. We free and lubricate the release mechanism at installation and show the homeowner how to test it, so an emergency release still works in an outage.
  • FAAC boards and OEM-vs-aftermarket parts confusion. FAAC control boards and connectors are specific to the model and board revision, and aftermarket boards or mismatched remotes often won’t program cleanly with the original receiver. We fit OEM boards and genuine FAAC receivers where the warranty and reliability call for it, and only use quality aftermarket parts where we can stand behind them – and we tell you which is which before we order.

One Summerlin reality worth naming: the afternoon heat on a west-facing driveway can push a black operator housing past what a European-market install assumed, so we spec the duty rating and housing location for sun exposure, not just gate weight.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our FAAC Gate Installation Process

Every FAAC job follows the same measured path, from the first call to the final cleanup. Here’s what to expect.

  1. 1
    Phone call and free measurement. A live person answers, 24 hours a day, and we book a free on-site measure of your gate, driveway and power run to the operator location.
  2. 2
    Written quote and model recommendation. We recommend the FAAC model that fits your gate’s weight, travel and duty cycle – swing or sliding – and put the price in writing before anything is ordered.
  3. 3
    Parts and OEM decision. We explain where genuine FAAC parts matter for your model and where a quality aftermarket part is the sensible call, and you approve the choice.
  4. 4
    Installation day. Our background-checked, uniformed technicians mount the operator, run and protect the power, wire safety edges and photo-eyes, and set the geometry to FAAC specs.
  5. 5
    Commissioning and test. We teach the limits, test the manual release, cycle the gate repeatedly under load, and walk you through the remotes and keypad.
  6. 6
    Cleanup and written guarantee. We clean the site and hand you the 90-Day Done Right Promise in writing, with no paperwork argument if anything needs a return visit.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What FAAC Gate Installation Costs in Summerlin

FAAC gate installation in Summerlin typically runs from about $1,800 for a single swing operator on an existing gate up to $6,500 or more for a sliding operator with new power and safety hardware, and every figure below is quoted and agreed before any work starts. Here’s how the numbers break down.

Scenario Typical range
FAAC swing operator, single gate, existing power $1,800 – $3,200
FAAC sliding operator, single gate, existing rail $2,400 – $4,500
New power run and conduit to operator location $600 – $1,800
Safety edges, photo-eyes and keypad $350 – $900
Dual-gate setup with tandem FAAC operators $3,800 – $6,500

What moves the price: gate weight and length, whether the rail and posts are sound, distance from the power source, and whether you want access control integrated. Our standing offers apply here too – $50 Off Any Repair Over $250 and a free second opinion on any written estimate. Call (866) 623-9848 for a free estimate and a written price.

Two professional contractors installing a new black metal gate. in Summerlin, NV

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for FAAC Work

We’re trained and equipped on nine gate-automation brands, so we approach your FAAC system knowing how it differs from a LiftMaster or a Mighty Mule – and we don’t guess. Our technicians have up to 13 years of experience, work background-checked and uniformed in your home the way they’d work in their own mother’s, and follow the K.E.Y.S. values: Krafted right, Every time, Your home first, Standing behind it.

A live person answers the phone 24 hours a day, and every FAAC installation is backed by the written 90-Day Done Right Promise – no hassle, no arguing. When the operator isn’t FAAC, we also service LiftMaster, Mighty Mule, Ghost Controls and DoorKing, so a mixed driveway doesn’t send you hunting for a second company. As an independent FAAC service provider, we make the fix on the first visit, price it upfront, and stand behind it.

FAQs

Do you handle FAAC warranty concerns during installation? We install and commission FAAC equipment carefully to protect the manufacturer’s warranty, but as an independent provider we don’t administer FAAC warranty claims ourselves – we’ll tell you what the warranty covers and coordinate the parts you need. Call (866) 623-9848 with your model number for a straight answer.

Can you get genuine FAAC parts for my operator? Yes – we source OEM FAAC boards, receivers and fittings for the common residential models like the 391, 400, 402 and 740, and we tell you when a quality aftermarket part is the better call. Call (866) 623-9848 for a free estimate.

Should I repair or replace my FAAC operator? Repair usually wins when the gate, posts and power are sound and only the operator or a board has failed; replacement makes more sense when the model is obsolete or the gate geometry was never right. We diagnose first and recommend honestly. Call (866) 623-9848 for a free second opinion on any written estimate.

How fast can you schedule a FAAC installation in Summerlin? Installation is measured, ordered and scheduled work – typically one to two weeks from the site visit depending on the model – so call (866) 623-9848 to book your free measurement and get a written quote.

What does a full FAAC installation include? A full installation includes the operator, mounting, the power run and protection, safety edges and photo-eyes, limit teaching, manual-release testing, remote and keypad setup, cleanup, and the written 90-Day Done Right Promise. Call (866) 623-9848 for a free estimate.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch