Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFAAC Gate Access Control in Summerlin: What to Know First
FAAC gate access control work in Summerlin usually takes a single visit, and most repairs land between $185 and $540 depending on the entry hardware involved. We quote the price and you agree to it before a single bolt is turned, so the bill matches the number you were given. We’re an independent FAAC service provider, not affiliated with or authorized by the manufacturer.

This page is for the homeowner with a FAAC operator and a keypad, intercom, remote, or card reader that has stopped behaving. Maybe the gate opens with the clicker but not the code pad. Maybe the entry panel buzzes and nothing moves. We’re Ironworks Gate Co. Summerlin, and FAAC is one of nine automation brands we work on. Call (866) 623-9848 and a live person answers, day or night.
How FAAC Products Fail – and How We Fix Them
FAAC builds solid operators, but the access-control layer is where Summerlin jobs concentrate. Here’s what we actually find on driveways around The Ridges, Red Rock Country Club, and The Trails, and how we handle each one.
- Keypad membrane and post corrosion on the 844 and 844R series. Summerlin’s dry heat does the wiring few favors, and the forty-degree swings between a July afternoon and a clear winter night work the post seals loose over time. Moisture creeps into the keypad housing, the membrane goes soft, and codes start dropping or the gate reads the same code twice. We replace the keypad module, reseal the post, and test every code slot rather than just the one the owner uses.
- Radio receiver and rolling-code drift on 433MHz and 868MHz FAAC remotes. When a remote stops working but a neighbor’s still does, the problem usually isn’t the remote. It’s the receiver board holding memory that no longer matches the handset. On 390-series and 391-series operators we re-pair the handset, clear stale codes from the board, and confirm the range at the gate’s far edge, not just at the operator.
- Loop detector and vehicle-safety logic faults on FAAC 640 and 644 control panels. A gate that reverses mid-travel or closes on a car usually points to a failing inductive loop or a mis-set dip switch after a power event. Summerlin’s monsoon-season outages trip those panels more than owners realize. We test the loop with a meter, re-seat the panel, and walk the safety edges before leaving.
- Intercom and phone-entry wiring on 620-series and 760-series systems. Speech that cuts out or a buzzer that rings but won’t release the latch is almost always a bad splice at the pedestal or a transformer that has aged out. We trace the low-voltage run, replace the transformer if it’s sagging, and confirm two-way talk before we call it done.
- Battery-backup and control-board failure on older FAAC 400 and 402 units. When the gate won’t cycle after an outage, the battery pack is often flat and the board has logged a fault. We test the battery under load, and if the board is compromised, we walk you through OEM versus a quality aftermarket replacement so you’re not paying for a part you don’t need.
One thing owners can’t get from the manufacturer’s site: on FAAC 844 keypads, a faded or intermittent code is more often the post gasket than the keypad itself. New membrane on old gasket fails again within a season. We replace both.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our FAAC Gate Access Control Process
- 1
Phone call, live answer. You reach a person, not a voicemail tree. We ask what the gate is doing, which FAAC hardware is on the post, and when it started.
- 2
On-site diagnostics. We test the operator, the access device, the wiring, and the safety edges. Background-checked, uniformed technicians, working your property the way they’d work their own mother’s.
- 3
Parts decision. We explain OEM versus quality aftermarket, what each does to your warranty and your budget, and which fits your gate. You decide.
- 4
The repair. Done right, in one visit where the parts allow it.
- 5
The test. Every code, every remote, every safety reversal, at the far end of the driveway, not just at the panel.
- 6
The guarantee. Written 90-Day Done Right Promise on the work. If it isn’t right, we come back and make it right. No paperwork, no arguing.
See the difference
Before
After
Before
After
Before
AfterWhat FAAC Gate Access Control Costs in Summerlin
Real numbers, so you can plan. Every job is quoted and agreed before work starts.
| FAAC job | Typical range |
|---|---|
| Keypad replacement (844/844R) | $260 – $420 |
| Remote re-pair and receiver service | $95 – $180 |
| Loop detector or safety-edge repair | $240 – $480 |
| Intercom or phone-entry module service | $210 – $540 |
| Control board replacement (OEM) | $380 – $720 |
| Battery backup replacement | $140 – $260 |
What moves the price: whether the post has to be dug out, whether the board is OEM or aftermarket, and whether the low-voltage run needs re-pulling. We give a free estimate and a free second opinion on any written estimate you already have. Call (866) 623-9848.
Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for FAAC Work
FAAC is one of nine brands we’re trained and equipped on, alongside LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so the correct fix happens on the first visit whatever’s on the driveway. Our technicians have up to 13 years of experience, and the 90-Day Done Right Promise is written on every job. A live person answers 24 hours a day, 7 days a week. No voicemail trees. No waiting until Monday. Standing offers include $50 Off Any Repair Over $250 and an $89 Seasonal Tune-Up, plus a permanent 5% Senior and Veteran discount. We will be there when we say, and we stand behind it.
FAQs
FAAC’s factory warranty terms depend on the unit’s age and what failed, and we don’t speak for the manufacturer. What we do is use warranty-safe practices: OEM parts where the board justifies it, and a written 90-Day Done Right Promise on our work regardless. Call (866) 623-9848 for an exact quote.
Usually, yes. Common FAAC modules like the 844 keypad and 640/644 boards are available, and where OEM is scarce we use quality aftermarket with your approval. We tell you upfront if a part is on order. Call (866) 623-9848.
Repair is usually the better call unless the board is compromised or the unit is well past its service life. We give you both numbers and the honest recommendation. Free second opinion on any written estimate. Call (866) 623-9848.
Often same day, and we have 24/7 emergency availability for gates stuck open or refusing to close. Call (866) 623-9848 and a live person answers.
Yes. On new FAAC access-control installations we handle the low-voltage power run and the safety edges, measured and scheduled with a free measure and a written price. Call (866) 623-9848.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.