A Ironworks company - serving Summerlin, NV

FAAC Gate Parts & Welding in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

FAAC Gate Parts & Welding in Summerlin: What to Know First

We provide independent FAAC gate parts and welding in Summerlin, and most FAAC repairs are finished in one visit. Hinge replacement, post repair and arm-bracket welding typically land between $260 and $850, and we quote the price and get your agreement before any work starts. We’re not the cheapest bid in town. We’re the call you don’t have to make twice.

Professional welder using an angle grinder for metal gate repair services in Summerlin, NV

Call (866) 623-9848

This page is for Summerlin homeowners with a FAAC swing or slide operator who needs the metalwork side handled correctly: hinges, posts, rails, rollers, latches and custom welding. FAAC builds good equipment, but a FAAC operator is only as sound as the gate it moves. Call us at (866) 623-9848 for a free estimate.

How FAAC Products Fail – and How We Fix Them

FAAC equipment fails in patterns. After years of FAAC service in Summerlin, we know which failures show up on which operators, and what the real cause usually is.

  • FAAC 400-series swing operators – arm bracket cracking at the gate leaf. The 400 and 412 operators push a lot of torque through the articulated arm, and the bracket welded to the gate frame takes the stress. We see hairline cracks at the weld long before the operator itself complains. We cut out the fatigued steel, weld new bracket plate to the frame, and check the operator’s limit settings so the repaired bracket isn’t loaded the same way. Left alone, a cracked bracket eventually shears and the arm swings free.
  • FAAC 390 and 391 operators – hinge sag that the motor can’t compensate for. A worn hinge drops the leaf a quarter inch, the operator strains to push it, and the control board throws an obstruction fault that looks like a motor problem. It usually isn’t. We replace the hinge set, re-hang the leaf square, and re-check the operator’s force and travel. In Summerlin, the swing-side hinges on west-facing gates dry out faster in the summer heat, which speeds this up.
  • FAAC 844 and 846 slide operators – track and roller wear. The 844 and 846 slide operators are strong, but they will not tolerate a rail that has shifted or rollers that have flattened. We replace rollers, re-level the track, and weld any rail sections the original installer butt-joined without enough penetration. Most slide gates in Summerlin sit on concrete that moves a little with the heat, so track re-leveling is part of the job, not an add-on.
  • FAAC S418 and 418 operators – post movement at the pivot. The pivot post is the foundation of a swing gate, and on lighter installations it can shift in the desert soil after a wet winter. The operator then fights a gate that’s no longer plumb, and the leaf drags. We reset or replace the post and re-weld the pivot assembly. Post replacement is the more expensive fix but is the only one that holds.
  • FAAC latches and locking hardware – misalignment after the gate settles. Latch and lock hardware on a FAAC swing gate is a moving target once the leaf shifts. Rather than force the latch, we locate the real problem, whether it’s hinge wear, post movement or weld fatigue, and correct that first. Otherwise we’d be back in three months.

One parts nuance worth knowing: FAAC sells internal operator parts as assemblies, and some of the structural brackets and mounting plates aren’t supplied as separate line items. When a FAAC bracket is fatigued, we fabricate a replacement to the same dimensions rather than replacing the whole operator. We use OEM parts where FAAC supplies them and where warranty matters, and quality aftermarket metalwork where it’s the better value. We’ll tell you which is which before we start.

As an independent FAAC service provider, we aren’t affiliated with or authorized by FAAC. We service the equipment, not the brand’s warranty program, though we’ll tell you if a repair could affect a manufacturer warranty before we touch the gate.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our FAAC Gate Parts & Welding Process

Here’s how a FAAC parts and welding job works, from your call to cleanup.

  1. 1
    Diagnostics on site. We test the operator, inspect the hinges, posts, rails and welds, and find the actual cause. A FAAC obstruction fault is rarely just the board.
  2. 2
    Parts decision, explained to you. OEM versus quality aftermarket, with the trade-offs in plain terms. We agree the parts before we order or fabricate.
  3. 3
    Written price, before any work. The quote is agreed before a single bolt is turned. No surprises on the bill.
  4. 4
    The repair or weld. Background-checked, uniformed technicians do the metalwork and the mechanical reset in the same visit whenever the parts are in hand.
  5. 5
    Full test. We cycle the gate under load, check the force and travel limits, and confirm the latch and safety edges work as they should.
  6. 6
    Cleanup and the guarantee. The site is left clean, and the job is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right.

What FAAC Gate Parts & Welding Costs in Summerlin

Here are realistic ranges for common FAAC jobs in Summerlin. Every price is quoted and agreed before work starts.

  • Hinge replacement (per hinge): $120 – $260
  • Pivot or hinge post reset or replacement: $350 – $900
  • Rail or frame repair, welded: $180 – $420
  • Operator arm bracket fabrication and welding: $260 – $550
  • Slide gate roller replacement and track re-level: $220 – $480
  • Latch and lock hardware repair or replacement: $110 – $300
  • Custom welding (call for a quote): priced per job

What moves the price: whether the post has to come out, how much rust is on the frame, whether the parts are OEM or fabricated, and gate weight. A heavy estate leaf takes longer to re-hang than a light one.

Call (866) 623-9848 for an exact quote. Estimates are free, and we offer $50 off any repair over $250.

Professional welder using an angle grinder for metal gate repair services in Summerlin, NV
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for FAAC Work

We do FAAC work the way it should be done, and we back it in writing. Every job is covered by our 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no paperwork and no arguing.

A live person answers the phone 24 hours a day, 7 days a week, so you’re not leaving a voicemail on a Friday night. Our technicians have up to 13 years of experience and are trained and equipped on FAAC and eight other opener brands, including LiftMaster, Mighty Mule, Ghost Controls and DoorKing. That matters in Summerlin, where a gate might have been retrofitted with a second operator over the years and the brand on the motor isn’t the only one involved. Being trained on nine brands means we make the correct fix on the first visit.

Standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a 5% senior and veteran discount, always.

FAQs

Ready to Get Your FAAC Gate Fixed Right?

If you own a FAAC gate in Summerlin and it needs parts or welding, call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. We’ll quote the price, agree it with you before we start, and stand behind the work in writing. A square deal, no surprises on the bill.

Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch