Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Gate Motor & Opener in Summerlin: What to Know First
We provide independent Linear gate motor and opener service in Summerlin, and most repairs are completed on the first visit – a sticking operator arm or a control board that has lost its program is usually diagnosed and corrected within a single appointment. Expect a written upfront price agreed before we touch a bolt, so the bill you get is the number you said yes to. That is the honest posture: an exact quote first, the work second, the 90-Day Done Right Promise behind it.

This page is for the Summerlin homeowner with a Linear operator already on the driveway – a slide gate in The Ridges, a swing gate in Red Rock Country Club, a community-entry arm in Sun City Summerlin – who wants it repaired properly rather than replaced on a guess. As an independent Linear service provider, we are not affiliated with or authorized by Linear; we simply know their equipment well. Call (866) 623-9848 for a free estimate.
How Linear Products Fail – and How We Fix Them
Linear builds solid residential operators, and the failures we see in Summerlin are consistent enough that we can usually name the cause before we arrive. Here are the five patterns that come up most.
- Slide operators that stall halfway (LSO and similar slide series). The gate runs partway and reverses, or grinds to a stop. Nine times out of ten it is a worn drive gear or a chain that has stretched past its adjustment, not a dead motor. We inspect the gear train and chain tension first, replace the failed component, and re-set travel limits – rather than quoting a whole new operator.
- Control boards that forget their limits after a power event (LSO and swing-door series). Summerlin sees frequent brief outages and brownouts in the monsoon months, and a Linear board can lose its programmed open and close positions. We test the board and the surge path; often a board reset and limit reprogram solves it, and a surge suppressor on the supply prevents the repeat.
- Swing-arm and articulated-arm wear (LA-series swing operators). The arm develops play at the pivot pins and the gate begins to sag or drift when closing. The pins and bushings wear before the motor does. We replace the worn pivot hardware and re-level the gate so the arm runs true again.
- Photo-eye and safety-edge faults that stop the gate cold. A misaligned or sun-blinded photo-eye will read as an obstruction and refuse to close. In Summerlin the low winter sun can sit directly in the eye at certain times of day. We realign, test, and where needed relocate the eye or fit a safety edge so the gate behaves in every light.
- Battery-backup units that no longer hold a charge (Linear battery-backup operators). The gate works fine on mains power but won’t cycle during an outage. The battery has simply aged out. We test the battery under load, replace it with the correct spec, and confirm the operator still meets its cycle rating on backup.
One note an owner won’t find on Linear’s own site: on several Linear slide operators the drive gear is a deliberate wear part, and an owner hearing a faint grinding will often be told elsewhere to replace the whole unit. The gear alone is far less costly and, replaced properly with travel limits reset, restores the operator rather than retiring it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Linear Gate Motor & Opener Process
- 1
The call and the schedule. A live person answers, 24 hours a day, seven days a week – no voicemail tree. We take the Linear model, the gate type, and the symptom, and book a visit that fits your day.
- 2
Diagnosis on site. We test the operator, controls, safety devices, and the gate’s own mechanical condition – because a motor problem is sometimes a hinge, roller, or alignment problem wearing the motor out.
- 3
The parts decision. Where an OEM Linear part is the right call we use it, and where a quality aftermarket equivalent does the same job for less we say so plainly. You hear the trade-off, not a sales pitch.
- 4
The repair. We do the work, keep the operator within its rated duty cycle, and leave the gate mechanism correct so the fix lasts.
- 5
The full test. Every safety device, every limit, every cycle – open, close, obstruction stop, and battery backup where fitted, checked before we pack up.
- 6
The guarantee. The 90-Day Done Right Promise is written, no paperwork, no arguing: if it is not right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Linear Gate Motor & Opener Costs in Summerlin
Every job is quoted upfront and agreed before work starts – these ranges help you plan, and the written estimate is the number that counts.
- Diagnostic and service call: $79 – $125
- Battery replacement, Linear backup operator: $180 – $320
- Photo-eye or safety-edge repair: $150 – $325
- Drive-gear or chain repair, slide operator: $260 – $520
- Control-board reset or replacement: $240 – $480
- Swing-arm pivot and linkage rebuild: $220 – $450
- Full Linear operator replacement (unit and install): $650 – $1,400
What moves the price: the Linear model, whether the part is OEM or quality aftermarket, and the gate’s own mechanical condition. We don’t promise same-day on new-operator work – that’s measured, ordered, and scheduled. Repairs we aim to handle quickly. Call (866) 623-9848 for a free estimate and a written price.

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for Linear Work
We’re the dedicated gate specialist, not a generalist. Our technicians have up to 13 years of experience, trained and equipped on nine gate-automation brands – so whether your driveway has a Linear operator or a LiftMaster, Mighty Mule, Ghost Controls, or DoorKing unit, the correct fix is made on the first visit. Every job is backed by the 90-Day Done Right Promise, and a live person answers the phone 24 hours a day. Background-checked technicians work in your home the way they’d work in their own mother’s. And every job carries our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Done right, and backed in writing. When a Summerlin homeowner calls, we will be there when we say.
FAQs
Is a Linear operator still worth repairing, or should I replace it? Usually repair. On most Linear slide and swing operators the failure is a gear, a board, a battery, or pivot hardware – all fixable for a fraction of a new unit. We tell you honestly when a wear pattern means replacement is the better long-term call, and we never push a new operator to avoid a repair.
Can you get Linear parts, and how fast? Yes. We stock common Linear wear parts – gears, batteries, photo-eyes, pivot pins – and source the rest quickly. When a part needs ordering we tell you the real timeline up front, not a guess.
Does repairing my Linear operator affect the manufacturer’s warranty? We work in a warranty-safe way, using the correct spec parts and keeping the operator within its rated duty cycle, and we explain what your Linear warranty covers before we start. As an independent Linear service provider we’re not the manufacturer, but we make sure the repair doesn’t create a problem you’d have to argue about later.
How fast can you get to my Summerlin gate? For Linear repairs we aim to be quick and a live person answers the phone 24 hours a day, seven days a week. New-operator work is measured, ordered, and scheduled – a free measure and a written price, not a same-day promise. Call (866) 623-9848 to book.
What if the repair isn’t right? The 90-Day Done Right Promise covers it. If something we touched isn’t right, we come back and make it right – written, no hassle, no arguing. That’s the Keystone Standard on every Linear job.
If your Linear gate operator in Summerlin is sticking, stalling, or refusing to close, call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. We’ll diagnose it, quote it upfront, and stand behind the work in writing.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.