Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Gate Parts & Welding in Summerlin: What to Know First
We provide independent Linear gate parts and welding in Summerlin, and most Linear repairs we’re called out for are finished in a single visit. Linear swing and slide operators are common on Summerlin driveway gates, and the parts that fail around them – hinges, posts, rails, rollers, latches – are exactly the kind of work we do. The price is quoted and agreed before any work starts, so there are no surprises on the bill. Call (866) 623-9848 and a live person answers, day or night.

This page is for the homeowner with a Linear system on the driveway who needs metal and hardware work done right, not a sales pitch for a new gate.
How Linear Products Fail – and How We Fix Them
Linear systems are dependable, and the failures we see in Summerlin tend to sit at the intersection of the operator and the gate itself – the metal the motor is pushing against. Here’s what we run into and how we handle it.
- Hinge fatigue on older swing gates. Many Linear swing setups in Summerlin run on hinges that have been carrying the same weight for two decades. The gate starts to sag, the Linear arm works harder to close it, and eventually the operator faults out. We replace the hinge set and re-align the gate so the arm swings freely again.
- Post movement in caliche-heavy soil. Summerlin’s ground sets hard, and when a gate post shifts even a quarter inch, a Linear operator that was tuned to a straight gate begins to strain. We reset and weld the post, then re-tune the arm to the corrected geometry.
- Rail and frame cracks near the operator mount. The stress point where a Linear arm attaches to the gate takes a beating over the years. Cracks there are a welding job, and we weld them properly rather than bolting on a patch. Left alone, a crack spreads into the frame.
- Worn rollers on slide gates. Linear slide operators on Summerlin properties often outlast the rollers underneath. A dragging roller makes the motor work harder and can trip the safety reverse. We replace rollers and check the track for alignment.
- Latch and lock wear. Latches take daily abuse, and a worn latch on a Linear gate can prevent clean latching or cause the operator to reverse. We replace the latch hardware and confirm the gate closes and locks as it should.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Linear Gate Parts & Welding Process
Every Linear job follows the same steps, whether it’s a hinge swap or a post reset.
- 1
Diagnose on site. We look at the gate and the Linear operator together, because the fault is often in the metal, not the motor.
- 2
Decide on parts. Where original Linear-compatible parts are the right call, we use them. Where a quality aftermarket hinge or roller does the job better and lasts longer, we say so and explain why.
- 3
Quote before we start. You get an upfront price for the work, agreed and settled before a single bolt is turned.
- 4
Do the repair. Welding, hinge replacement, post reset, roller or latch work, whichever the gate needs. Most jobs are finished in one visit.
- 5
Test the gate and the operator. We cycle the gate, check the Linear arm’s travel and safety reverse, and make sure it closes clean.
- 6
Back it in writing. Every job carries our 90-Day Done Right Promise. If it isn’t right, we come back and make it right.
What Linear Gate Parts & Welding Costs in Summerlin
Prices depend on the gate, the hardware, and how much welding is involved. Here’s the range Summerlin homeowners typically see:
- Hinge replacement (per hinge set): $150 – $350
- Gate roller replacement: $125 – $300
- Latch and lock repair or replacement: $100 – $275
- Rail or frame welding: $200 – $500
- Post reset or replacement: $350 – $900
- Custom welding and fabrication: quoted per job after we see the gate
What moves the price: the number of hinges or rollers, whether the gate needs to come off its mounts, how much welding is required, and whether the Linear operator needs re-tuning afterward. Every price is quoted and agreed before work begins. Call (866) 623-9848 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Summerlin Homeowners Call Ironworks Gate Co. Summerlin for Linear Work
We’re an independent Linear service provider, not affiliated with or authorized by Linear, and that’s fine by us – it means we recommend the part that fits your gate rather than the one on a shelf. Our technicians have up to 13 years of experience, and they’re trained on nine gate-automation brands including Linear, so the correct fix gets made on the first visit. Every job is protected by our 90-Day Done Right Promise, and a live person answers the phone 24 hours a day, seven days a week. Summerlin homeowners call us because the work is done once and guaranteed in writing – and if a Linear operator ever needs a hand, we service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing too.
FAQs
Do you use genuine Linear parts? We use original Linear-compatible parts where they’re the right call, and quality aftermarket hardware where it lasts longer. We’ll tell you which and why before any work starts. Call (866) 623-9848 for an exact quote – estimates are free.
Can you get Linear parts for an older gate? Usually, yes. Many Linear parts are still available or have direct equivalents, and we’ll confirm what fits your system on site. Call (866) 623-9848 and we’ll take a look.
Should I repair my Linear gate or replace it? Repair is usually the right call when the frame and operator are sound and only hinges, rollers, or a weld are failing. Replacement makes sense when the gate structure is beyond saving. We’ll give you a straight answer either way – call (866) 623-9848.
How fast can you get to a Linear repair in Summerlin? Most Linear repairs we quote are done in a single visit, and we’ll give you a realistic time when you call. Call (866) 623-9848 to schedule.
Is the work guaranteed? Yes. Every Linear job is backed by our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. Call (866) 623-9848 for a free estimate.
Get Your Linear Gate Fixed Right
If your Linear gate is sagging, sticking, cracking, or just not closing the way it used to, call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. We’ll quote the work upfront, do it right, and back it in writing with our 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.