A Ironworks company - serving Summerlin, NV

Linear Hinge & Roller Replacement in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Linear Hinge & Roller Replacement: The Summerlin Owner’s Guide

We replace failing Linear hinges and rollers with correctly matched parts, and a typical installed replacement runs $185 to $340 depending on the model and how many points have worn out. Most hinge and roller jobs are done same-day in Summerlin, and we quote the price upfront before any work begins. We’re an independent service provider and not affiliated with Linear, but we’re trained on Linear automation and stock-compatible hardware sourcing is part of the job we do.

Technician performing professional maintenance on an automatic residential gate motor in Summerlin, NV

Call (866) 623-9848

Owners usually find this failure the same way. The gate starts dragging at one end. It squeals on the first few inches of travel, then quiets down once it’s moving. Sometimes the gate sags just enough that the motor strains, or the operator reverses on its own mid-swing. That last symptom is what brings most Summerlin calls in, because a gate that reverses on its own usually means a hinge has seized and the control board is reading the drag as an obstruction.

Key takeaways

  • Installed Linear hinge & roller replacement in Summerlin: roughly $185 to $340.
  • Most jobs are done in a single visit, same-day when we can get there.
  • Price is quoted and agreed before we touch a bolt.
  • Every replacement is covered by our written 90-Day Done Right Promise.

Which Linear Models This Applies To

Linear swing and slide gate operators use different hinge and roller hardware depending on the series, and the pivot hinges on a Linear swing gate are not the same spec as the trolley rollers on a Linear slide gate. The model number is printed on the operator housing plate, usually inside the control box cover, and it tells us which hardware family fits. If you can read that plate, you’ve saved us a trip and saved yourself a wrong-part return. If you can’t, we measure the hinge pin diameter and the roller track width on-site.

Here’s the compatibility gotcha most owners miss: Linear changed hinge pin diameters across production runs of similar-looking swing operators, and older gates in Summerlin’s 1990s and early-2000s builds often carry the earlier, smaller pin. A hinge that looks identical to a newer one won’t seat, and forcing it cracks the weld ear on the gate post. That’s a repair that costs several times what the hinge did.

On OEM versus aftermarket, our position is straightforward. On a Linear operator still under ten years old and structurally sound, OEM hardware is worth the modest premium because the tolerances match the original design. On older hardware, a quality aftermarket equivalent from a known supplier does the same job for less, and we’ll tell you which is the better call for your specific gate rather than pushing the more expensive part.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Linear Hinge & Roller Replacement Is Failing

These are the symptoms we see in Summerlin most often, and each one points to a specific underlying cause. If two or three of these show up together, the hardware has reached the end of its service life and should be replaced as a set rather than one piece at a time.

  • Gate sags at the latch end. A worn hinge bushing loses its round shape and the gate drops a fraction of an inch per season. By the time it’s visible, the hinge has been failing for a year or more.
  • Squealing or grinding during travel. The roller bearing has lost its grease or seized outright. A dry roller doesn’t just make noise, it drags on the track and overloads the motor.
  • Operator reverses mid-swing or won’t close fully. The control board reads a seized hinge or roller as an obstruction and reverses for safety. The motor is usually fine; the hardware is the problem.
  • Gate moves in jerks instead of a smooth arc. Flat spots on the roller or a bent hinge pin. This one accelerates wear on every other component in the drive train if it’s left alone.
  • Visible play when you push the gate by hand. Grab the gate at the latch end and try to rock it. More than a quarter-inch of movement at the hinge means the pin or bushing is worn out.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Hinge and roller replacement is one of the more predictable jobs on a gate, and the price reflects that. Here’s what Summerlin owners can expect:

Item Typical range
Single hinge replacement, installed $85 – $140
Single roller replacement, installed $75 – $125
Full set, hinges and rollers, installed $185 – $340
Hinge pin or bushing only $60 – $110
Weld repair to a cracked hinge ear, if needed $120 – $260

The range comes down to how many points are worn, whether the gate needs a weld repair, and which Linear model you have. The number we quote is the number you pay, settled before a single bolt is turned. If we open up a hinge and find the gate post needs welding, we stop and re-quote rather than adding it to the bill at the end. Every replacement is covered by our written 90-Day Done Right Promise.

DIY or Call Us?

Some of this you can check yourself, safely. Rocking the gate at the latch end, listening for the squeal, and reading the model plate on the operator are all fine. Cleaning a roller track and brushing out grit or gravel is also fair game and often quiets a gate temporarily.

Where DIY goes wrong on hinges is the removal itself. A gate leaf can weigh several hundred pounds, and once the top hinge pin is out, the gate is held up by one hinge and your shoulder. We’ve seen more injuries and more bent gates from a homeowner pulling a hinge than from any other part on the gate. And if the gate post has a cracked weld ear, forcing a new hinge into it finishes the crack. That weld repair costs more than the whole hinge job would have.

If you’re not sure whether you’re looking at a hinge problem or a roller problem, call us at (866) 623-9848. We’ll ask a few questions and tell you honestly whether it’s something to sort out on your own or a job for us.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch