A Ironworks company - serving Summerlin, NV

Linear Keypad & Intercom Repair in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Linear Keypad & Intercom Repair: The Summerlin Owner’s Guide

We repair and replace Linear keypads and intercoms for Summerlin homeowners, and a straightforward keypad swap typically runs $185 to $340 installed, while an intercom repair or replacement runs $240 to $520 depending on the unit and whether new wiring is needed. Most keypad calls are handled the same day you reach us, and a live person answers at (866) 623-9848 around the clock. Intercom work is usually scheduled for a free measure and a written price. Most owners find out something’s wrong the same way: the code that opened the gate for years suddenly doesn’t, or the intercom crackles, cuts out, or goes silent at the front pedestal. A gate you have to open by hand changes the whole morning.

Technician installing a secure gate access control system on a brick pillar in Summerlin, NV

Call (866) 623-9848

Which Linear Models This Applies To

Linear makes this job confusing because the keypad is often a separate access-control item from the operator itself. The keypad on your pedestal might be a Linear AK-11, an AK-31, or a newer IP-series unit, while the operator behind the gate is a different model entirely. That matters: the part that failed is the keypad, not the motor, and matching the right replacement starts with reading the label on the back of the keypad housing, not the gate operator. If the label is sun-faded or gone, we measure the housing and count the wiring terminals, which tells us the series.

On intercoms, the model line (the telephone-entry units and their station variants) determines whether the replacement is a direct fit or needs a wiring adapter. The gotcha we run into in Summerlin is a pedestal wired for a two-wire system where the owner has bought a four-wire replacement. It looks identical on the box. It won’t work.

OEM versus aftermarket is a real decision with Linear. Genuine Linear keypads cost more, but the electronics and code storage age the way the original did, and a quality aftermarket unit built to Linear’s specs is a fair choice when the pedestal is older and you’re weighing cost against the rest of the system. We’ll tell you which we’d put on your gate and why before anything is ordered. Ironworks Gate Co. Summerlin is an independent service provider and is not affiliated with Linear.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Linear Keypad & Intercom Repair Is Failing

Here’s what a failing Linear keypad or intercom actually looks like, and what each symptom usually means underneath:

  • The code works intermittently. Some mornings the gate opens, some mornings it doesn’t. This is usually worn keypad buttons losing contact, or moisture inside the housing shorting the membrane. A board that’s failing rather than dead behaves exactly this way before it quits.
  • The keypad is dead – no beep, no light. No power reaching the keypad points to a failed transformer, a tripped breaker at the operator, or a chewed or corroded wire run at the pedestal. In Summerlin’s heat, low-voltage wire insulation cracks at the base of the pedestal where it bends, and that break is invisible until we trace it.
  • Buttons feel mushy or stick. The silicone keypad membrane has given out. Sun exposure on a west-facing pedestal accelerates this, and once a key sticks, codes stop registering reliably even when the electronics are still fine.
  • The intercom crackles or cuts out. Loose station wiring, corrosion at the terminals, or a failing speaker in the station. Intercom faults often trace to the wire connections at the house side rather than the gate side, so we check both ends.
  • The intercom is silent in one direction. You can hear them but they can’t hear you, or the reverse. That’s a failed microphone or speaker element in the station, and it’s usually a station replacement rather than a repair.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Linear keypad and intercom work in Summerlin runs $185 to $340 for a keypad replacement installed, and $240 to $520 for intercom repair or replacement. What drives the range is whether the wiring is sound, whether the pedestal needs work, and whether the replacement matches the existing system or needs an adapter. The figure we quote covers the part and the labor together, priced upfront and agreed with you before a single screw is turned. No surprise line items when the job is done.

Technician installing a secure gate access control system on a brick pillar in Summerlin, NV

We do not carry parts on a truck or stock Linear components locally – we source the correct part for your model and install it. Most straightforward keypad swaps are completed in a single visit. Every job is backed by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. Ask about our $50 Off Any Repair Over $250 and the standing 5% Senior and Veteran discount.

DIY or Call Us?

What you can safely check yourself: whether the keypad has power at all (look for the backlight or a beep), whether the breaker feeding the operator is tripped, and whether the wire at the base of the pedestal looks cracked or chewed. Beyond that, this work involves low-voltage wiring at the operator and inside a sealed housing, and swapping a keypad or intercom means disconnecting and re-terminating wires that the gate’s access control depends on. Get the wiring wrong and you can damage the operator board – a much larger bill than the keypad. We’d rather you call than guess. Call (866) 623-9848 and we’ll tell you straight whether it sounds like a part failure or something simpler.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch