A Ironworks company - serving Summerlin, NV

Ghost Controls Hinge & Roller Replacement in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Hinge & Roller Replacement: The Summerlin Owner’s Guide

We replace failing hinges and rollers on Ghost Controls gate systems in Summerlin, and most jobs run $145 to $380 installed, parts and labor together. Many of them we finish the same day you call. You usually find out this part is going when the gate stops swinging square: it drags at the bottom of the arc, the arm strains against a hinge that has gone stiff, or you hear a grind each time it reverses. In Summerlin’s heat, the roller bearings on a Ghost Controls gate typically dry out and seize before the hinge body itself gives up, so the noise shows up months before the gate quits moving.

Technician repairing an electric gate motor circuit board with a multimeter in Summerlin, NV

Call (866) 623-9848

Which Ghost Controls Models This Applies To

Ghost Controls builds its automatic gate openers around a handful of operator series – the AXS, TSS, and DTP lines are the ones we see most on Summerlin driveways, and the hinge and roller hardware on the gate leaf itself is largely shared across them because the leaf, not the operator, carries the pivot. If you’re matching a part, the model number is on the operator housing and on the control box cover. Read it before you order anything. The compatibility gotcha here is that older Ghost Controls leaves were hung on a different roller diameter than the current kits, and a roller that is even a few thousandths off will sit crooked in the track and wear the hinge pin unevenly. We measure the existing roller and the hinge pin bore on site rather than trusting a photo.

On the OEM-versus-aftermarket call: Ghost Controls sells its own replacement hinge and roller kits, and those are a clean fit when the gate hardware is original. For a Summerlin gate that has been re-hung or modified over the years, a quality aftermarket roller in a sealed bearing often outlasts the OEM part and costs less. We source whichever is the better match for your specific leaf and tell you why before we install it.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Hinge & Roller Replacement Is Failing

Most Summerlin owners call us when the gate starts misbehaving in one of these five ways. Each one points to a specific cause.

  • Grinding or squealing on each swing. The roller bearings have dried out and seized, so the metal is sliding instead of rolling. In Summerlin’s dry heat and blowing dust, this happens faster than most gate owners expect.
  • The gate sags or drags at the bottom of the arc. A worn hinge pin or a hinge that has pulled loose from the post lets the leaf drop. Left alone, the sag loads the operator arm and shortens the motor’s life.
  • The opener strains, times out, or reverses partway. A stiff hinge puts resistance on the arm, and the Ghost Controls operator reads that as an obstruction. The control board is usually fine – the hinge is the culprit.
  • Visible play when you push the gate by hand. If the leaf wiggles at the hinge with the operator disengaged, the pin or bushing has worn past spec. This is the one sign you can check safely yourself.
  • Rust streaks or chipped paint at the hinge points. Moisture gets into a failing hinge and the corrosion spreads. Once rust is weeping from the pivot, the hinge is close to the end of its life.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Summerlin homeowners, a Ghost Controls hinge and roller replacement typically lands between $145 and $380 installed. The low end is a straightforward swap on a single hinge and roller set. The high end covers multiple hinges, a seized or rusted pin that has to be cut out, a re-weld on a hinge plate that pulled loose from the post, or re-hanging a leaf that has been riding crooked for a while. We quote the price and agree on it with you before a single bolt is turned, so there are no surprises when the bill arrives. Parts and labor are itemized, and the work is covered by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. Current standing offer on repairs over $250 is $50 off.

DIY or Call Us?

You can safely check a few things yourself: push the gate leaf by hand with the operator disengaged and feel for play at the hinge, look for rust weeping from the pivot, and listen for a grind on the swing. What you shouldn’t do is try to force a seized hinge pin out with heat or a hammer on a gate that is still attached to a live operator – the leaf can swing free, and a loaded gate arm or a falling leaf is a genuine injury risk. We relieve the operator and support the leaf before we touch the hinge. Summerlin gate owners who have tried the DIY route often end up with a bent pin and a bigger repair. If your Ghost Controls gate is grinding or dragging, call us at (866) 623-9848 and we’ll tell you what we see.

FAQs

How long should Ghost Controls hinges and rollers last in Summerlin? Expect five to seven years on a well-used gate in Summerlin’s climate, and less if the gate sits in full afternoon sun. The heat and blowing dust dry out roller bearings faster than a coastal or cooler climate would, so we recommend checking the rollers each spring.

Can a failing hinge be repaired instead of replaced? Sometimes. A hinge with light play can often be re-pinned and greased, but once the pin bore is worn or the plate has pulled from the post, replacement is the honest fix. We’ll tell you which one your gate needs before we start. Call (866) 623-9848 for a free second opinion on any written estimate you’ve been given.

How long does the swap take? A single hinge and roller set is usually a one-visit job, often finished the same day you call. Multiple hinges or a re-weld run longer, and we’ll give you a realistic window when we quote. The price is agreed before we begin.

How do you source the part? We match the hinge and roller to your exact Ghost Controls model and leaf, choosing between the OEM kit and a quality aftermarket equivalent based on what fits and lasts best. We don’t carry parts on a truck – we source the right part for your gate, and we’re trained across LiftMaster, Mighty Mule, and DoorKing as well. Call (866) 623-9848 for a free estimate.

About Ironworks Gate Co. Summerlin: We’re an independent service provider and are not affiliated with Ghost Controls. We specialize in driveway and estate gates, and our technicians have up to 13 years of experience. A live person answers our phone 24 hours a day, 7 days a week. A written 90-Day Done Right Promise backs every job, and senior and veteran customers always receive a 5% discount.

If your Ghost Controls gate is grinding, sagging, or straining, call (866) 623-9848 for a free estimate. We’ll confirm the part, quote a square price before we touch a bolt, and have your gate swinging clean again.

Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch