Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Parts & Welding in Summerlin: What to Know First
We provide independent DoorKing gate parts and welding in Summerlin, and most mechanical repairs – hinges, posts, rails, rollers, latches – are finished in a single visit. Parts we don’t keep on hand are ordered and usually arrive within a few days, and we quote the price before we touch the gate, so the number you agree to is the number on the bill. We’re an independent DoorKing service provider, not affiliated with or authorized by the manufacturer.

This page is for the homeowner with a DoorKing swing or slide gate who has watched it sag, drag, or fail to latch, and wants a straight answer about what’s wrong and what it costs. Our technicians have up to 13 years of experience on gate systems. Call (866) 623-9848 and a live person answers, day or night.
How DoorKing Products Fail – and How We Fix Them
DoorKing builds heavy-duty operators and the cycles add up on them. What fails first is usually the steel around the operator, not the operator itself. Here are the failures we see most on Summerlin gates:
- Sagging gate leaves on the 6002 and 6400 swing series. The operator keeps pushing, but the gate drags because a hinge plate has worn or the hinge post has shifted. A DoorKing swing operator will happily burn itself out pushing a sagging leaf for months. We re-hang the leaf, replace the hinge set, and check post plumb before we ever look at the motor.
- Cracked welds at the frame-to-upright joints on older ornamental leaves. Summerlin’s dry heat and the daily 40-to-50-degree swing between afternoon and overnight expand and contract steel year after year. Welds that were sound at installation can hairline-crack at the stress points. We grind out the old weld, re-weld the joint properly, and dress it so it looks finished, not patched.
- Slide gate roller and track wear on the 9000 and 9100 slide series. The rollers flatten and the track fills with grit blown off the desert. A gate that shudders or climbs on one end is usually a roller or track problem, not an operator problem. We replace the roller set and true the track rather than selling a new motor.
- Latch and lock failures on DoorKing magnetic and mechanical latches. Misaligned strike plates are the usual culprit, and they come from post movement, not from the latch itself. We re-align the strike, confirm the latch engages fully, and check that the operator’s limit settings match the new geometry.
- Corroded control and loop wiring at the post. Summerlin’s monsoon season pushes water into post bases, and low-voltage loop and safety-edge wiring corrodes where it enters the ground. We trace the fault, replace the damaged run, and seal the entry point so it doesn’t repeat next season.
The pattern to notice: DoorKing operators are durable. The steel and the mounting around them take the abuse, and that’s where our welding craft earns its keep.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our DoorKing Gate Parts & Welding Process
Here’s how a DoorKing job runs from your call to our cleanup:
- 1
We answer and ask the right questions. A live person takes your call and gathers the gate type, the symptom, and the model if you have it. No voicemail, no callback queue.
- 2
We diagnose on site. We test the operator, measure the leaf for sag and plumb, inspect hinges, posts, rollers, and welds, and find the actual cause rather than the symptom.
- 3
We make the parts decision with you. Where an OEM DoorKing part is the right call, we quote it. Where a quality aftermarket part fits and holds, we tell you and quote that. We also tell you which choice protects the rest of your system. You decide before we order or install.
- 4
We weld and repair. Hinge replacement, post replacement, rail repair, custom welding, roller and latch work, done to the gate’s original geometry, not eyeballed.
- 5
We test the full cycle. Open, close, latch, safety reverse, limits. We run it until it’s right in front of you.
- 6
We clean up and back it in writing. The 90-Day Done Right Promise covers the work. If something isn’t right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat DoorKing Gate Parts & Welding Costs in Summerlin
Prices depend on the gate, the model, and how much steel needs work. These ranges reflect what Summerlin homeowners typically see, and every one is quoted and agreed before any work starts:
| Job | Typical Range |
|---|---|
| Hinge replacement (per hinge, parts and labor) | $150 – $350 |
| Post replacement (hinge or latch post) | $450 – $1,200 |
| Rail repair or re-weld | $200 – $600 |
| Custom welding (cracked frame, stress points) | $250 – $750 |
| Gate roller set replacement | $150 – $400 |
| Latch and lock alignment or replacement | $125 – $325 |
What moves the price: gate size and weight, whether the leaf has to come off its hinges, OEM versus aftermarket parts, and whether wiring or the post base needs attention once we open it up. We give you the number up front, and the bill matches it. Call (866) 623-9848 for a free estimate.
Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for DoorKing Work
We’ve done this work in Summerlin long enough to know which failures are climate, which are cycles, and which are just age. Our technicians are trained and equipped on nine gate-automation brands – DoorKing, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule – so if your gate turns out to have a mixed system, we’re not guessing. Every job is covered by our written 90-Day Done Right Promise, and the upfront price is settled before a single bolt is turned. Background-checked, uniformed technicians, a live person on the phone around the clock, and the same care on the 400th job as the first. If you’d like a second opinion on another company’s written estimate, we’ll give you one free.
We also service LiftMaster, Mighty Mule, and Ghost Controls gates when a Summerlin home has more than one operator on the property.
FAQs
Welding on the gate leaf generally does not affect the operator warranty, but cutting into operator components or using non-OEM parts on a covered operator can. We tell you which parts are warranty-sensitive on your model before we order, and we use OEM DoorKing parts where the warranty matters. Call (866) 623-9848 for an exact quote on your system – estimates are free.
Yes. Common parts – hinges, rollers, latches, strike plates – are usually on hand or ordered within a few days. Less common operator components take longer, and we’ll tell you the timeline up front rather than after the fact. Call (866) 623-9848 and we’ll check availability for your model.
Repair is almost always the right call when the frame is sound and the operator still cycles. A well-built DoorKing leaf with new hinges, a straightened track, and fresh welds can run another decade or more. Replacement makes sense when the frame is rusted through or the geometry is beyond safe repair. We’ll give you an honest read either way.
Most DoorKing repairs are scheduled quickly, and a gate that won’t close or a stuck leaf gets priority. A live person answers our line 24 hours a day, 7 days a week, so you’re not waiting until Monday to get on the schedule. Call (866) 623-9848 for the soonest opening.
Usually, yes, when the parts are on hand. We diagnose the steel and the operator together, quote the full scope, and complete as much as we can in one trip. If a part has to be ordered, we tell you the timeline and come back to finish.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.