A Ironworks company - serving Summerlin, NV

DoorKing Hinge & Roller Replacement in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

DoorKing Hinge & Roller Replacement: The Summerlin Owner’s Guide

We replace failing DoorKing hinges and rollers with the correct replacement part for your gate model, and most Summerlin jobs are done on a single visit. Installed cost typically runs $145 to $360 per gate, parts and labor together, and the price is settled with you before we turn a bolt. DoorKing swing-gate hardware is a different beast from what hangs on a typical driveway gate, so the part has to match your operator line, not just the gate.

Technician performing professional maintenance on an automatic residential gate motor in Summerlin, NV

Call (866) 623-9848

Owners usually find the problem before they call. The gate starts dragging through the last foot of travel. One hinge squeals through every cycle and the squeal gets louder over a few weeks. Or the leaf has sagged just enough that the opener strains, reverses, and refuses to latch. In Summerlin, where gates sit on sun-exposed masonry walls through 100-degree afternoons, that wear shows up faster than most homeowners expect.

Which DoorKing Models This Applies To

DoorKing hardware lives on both swing operators and slide operators, and the hinge and roller spec depends on which one you have. On swing gates, the 6000 and 6400 series operators drive heavy steel leaves that hang on adjustable hinges with a specific pin diameter and mounting pattern; the leaf weight and frame thickness decide the hardware. On slide gates, the 9000 and 9300 series operators use a trolley and roller arrangement on a V-groove or flat track, and the roller diameter and groove profile have to match the track’s. Two gates that look identical at the curb often carry different hardware.

The reliable way to identify your part is to read the operator label on the housing, then measure the hinge pin or roller diameter with calipers before you order anything. Matching by eye is how the wrong part ends up in the driveway.

On the OEM-versus-aftermarket question, DoorKing’s own hardware is a known quantity. Quality aftermarket equivalents do exist, and on many swing-gate hinge applications they hold up well. Our view is simple: match the load, match the finish, and don’t put a light-duty replacement on a heavy estate leaf just to save a few dollars. We’re an independent service provider and not affiliated with DoorKing; we work on their hardware every week and know where the substitutes are safe and where they aren’t. We also service LiftMaster, Mighty Mule, and Ghost Controls, so the part you need is one we can source correctly.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your DoorKing Hinge & Roller Replacement Is Failing

Five symptoms show up again and again on Summerlin gates, and each one points at something specific.

  • The gate sags at the latch end. A worn hinge pin or a flattened roller washer lets the leaf drop a fraction of an inch, which is enough to foul the striker.
  • The leaf drags or rubs through part of its travel. A roller that has worn flat or come out of its groove stops carrying the weight, so the gate rides on the frame.
  • A rhythmic squeal or grind on every cycle. That’s metal on metal inside a hinge or a dry roller bearing; the noise is the warning, not the problem.
  • The operator strains, reverses, or times out. When a hinge binds, the opener fights extra resistance and often trips its safety reverse before the gate closes.
  • Visible play or rust bleed at the hinge. Grab the gate and rock it; more than a slight flex means the hinge has worn beyond adjustment. Our desert sun hardens and cracks older lubricant, and rust bleed at the pin tells you the bearing surface is gone.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

On a Summerlin gate, a standard hinge and roller swap runs about $145 to $260 for a light to mid-weight leaf and $260 to $360 for a heavy estate gate with multiple hinges per leaf. That range covers the parts, the labor, alignment after the swap, and a full cycle test.

What pushes a job toward the top of the range: heavy leaves that need the gate lifted and rehung, a seized or corroded pin, hinges with a hard-to-match mounting pattern, or a slide track that also needs attention. We price the parts and the labor separately on the estimate so you can see exactly what you’re paying for, and the number you agree to is the number on the bill. Every job is covered by our written 90-Day Done Right Promise; if it isn’t right, we come back and make it right.

DIY or Call Us?

You can safely check a few things yourself. Rock the leaf by hand and note where the play is. Look at the hinge pins for rust or a worn groove. Wipe a roller clean and see whether it turns freely. Write down the operator model from the housing label. That information speeds up the call and lets us bring the right part.

Where DIY goes wrong: a heavy estate leaf can weigh several hundred pounds, and a hinge pin that lets go while the gate is off its latch can drop it on a hand or a foot. Pair that with an operator still energized and you have a real hazard. DoorKing hardware is not the place to learn by doing. If you’d rather not lift a gate that size on a Saturday, call us at (866) 623-9848 and we’ll get it sorted.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch