Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Motor Replacement: The Summerlin Owner’s Guide
We replace failed Mighty Mule gate motors in Summerlin, and most single-arm residential swaps land between $650 and $1,150 installed, depending on model and whether the control board, battery, or solar setup needs attention at the same time. We can usually get a technician out the same day on a dead operator, and the price is settled in writing before any work begins. Most Summerlin owners discover the failure the same way: the gate stops reversing on command, the arm groans and stalls halfway, or the opener clicks and does nothing when the remote is pressed. For an older Mighty Mule, that click is often the last sound it makes.

Which Mighty Mule Models This Applies To
Mighty Mule has been selling into the residential market for decades, and the swap is model-specific. The most common units on Summerlin driveways are the Mighty Mule 350, 360, 500, 502, and the MM560/MM660 series, plus the FM and FSL lines on double-gate setups. Before we order anything, we confirm the model on the data plate under the operator arm housing – it is usually a small silver sticker with the serial and model number. If that plate has weathered away, we measure the arm throw and the gate panel and cross-reference from those dimensions instead. The OEM-versus-aftermarket choice matters here: a genuine Mighty Mule motor or control board costs more but matches the housing and wiring exactly, while a quality aftermarket board can save $80 to $150 on a discontinued unit. For the older Mighty Mule models in Summerlin, we often source an aftermarket replacement because the OEM part has been out of production for years. We are an independent service provider and are not affiliated with Mighty Mule. We also service LiftMaster, Ghost Controls, DoorKing, and other leading brands when a gate is on a different system.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Mighty Mule Gate Motor Replacement Is Failing
These are the symptoms we see most often in Summerlin, along with what is actually going on underneath.
- The gate stalls or reverses partway through the swing. This is usually a worn motor gearbox or a control board that cannot read the limit switches. The gate tries to move, hits the limit, and the logic shuts it down as a safety trip.
- The operator clicks but the gate does not move. Often the capacitor has failed or the motor windings are shorted. A capacitor swap is cheap and quick; a shorted motor means the whole unit is done.
- The gate works after a long pause but not on the first press. For solar-powered Mighty Mule setups, this points to a battery that can no longer hold a charge. The motor isn’t the problem yet – the battery is.
- The arm runs rough, grinds, or lurches. Inner gear wear or a bent arm shaft, often after a hard summer or a gate that has been manually forced open. Once the gear teeth are chewed, replacement is the honest answer.
- The opener has no power or the fuse blows on reset. A failed control board or water intrusion in the housing. Summerlin’s summer monsoon rain and dust get into aging seals, and boards fail fast once moisture gets inside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a single-arm residential Mighty Mule motor replacement in Summerlin, installed pricing runs roughly $650 to $1,150. A straight motor or arm swap is usually at the low end; jobs that include the control board, battery, solar panel, or new safety edges climb toward the top. Here is how we break it down.
- Motor / operator arm: $380 to $650, depending on model and OEM versus quality aftermarket.
- Control board (when needed): $120 to $240 installed.
- Battery or solar components: $80 to $200 for most Mighty Mule solar setups.
- Labor: included in the ranges above – we do not bill parts at retail and labor separately.
The number we quote is the number on the bill. Every job is covered by our written 90-Day Done Right Promise, and we do not turn the first bolt until the price is agreed. We also honor $50 off any repair over $250 and a free second opinion on any written estimate from another company.
DIY or Call Us?
You can safely check the easy things yourself: the model plate under the arm, the battery voltage on a solar setup, the fuse, and whether the gate swings freely by hand with the operator disengaged. What goes wrong on a Mighty Mule replacement is everything after that. The operator is low-voltage but the control board and the 120V feed into the transformer are not, and we have seen more than a few summer storms turn a homeowner’s DIY wiring repair into a fire risk. The arm is also heavy and spring-loaded – it will snap if it is not supported when it comes off. If you are not sure what is clicking, call (866) 623-9848 and we will figure it out together. Estimates are free.
FAQs
A Mighty Mule residential motor typically runs 7 to 12 years before the gearbox or control board fails, and in Summerlin we often see the low end of that range because of heat cycling and dust on the housing seals. If your unit is past its tenth summer, plan for replacement rather than another repair.
Sometimes, yes. A failed capacitor, fuse, battery, or limit switch can be swapped for a fraction of a full replacement. Worn gears or a shorted motor winding cannot be repaired at the homeowner level, and that is when replacement is the honest answer. We will tell you which you have before any work starts.
A straight single-arm Mighty Mule swap is usually a one-visit job, often two to three hours on site. Jobs that require a new control board, solar components, or fresh conduit take longer, and we quote the time when we quote the price. We can usually schedule same-day on a dead operator.
We source the correct Mighty Mule motor, board, or arm to your exact model number, either genuine OEM or a quality aftermarket equivalent if the OEM part is discontinued. The part choice and its cost are part of the written estimate, so you know exactly what is going on your gate before we install it.
If your Mighty Mule has stopped answering the remote, call (866) 623-9848 for a free estimate. We serve Summerlin, The Ridges, Red Rock Country Club, and the surrounding neighborhoods, and a live person answers the phone 24 hours a day, 7 days a week.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.