Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Keypad & Intercom Repair: The Summerlin Owner’s Guide
Mighty Mule keypad and intercom repair in Summerlin usually runs $185 to $420 installed, depending on whether we’re replacing a wireless keypad, a wired intercom station, or both, and most of that work is finished in a single visit. Your gate works fine from the remote, but the keypad at the pedestrian entry has gone quiet, or the intercom crackles and nobody inside can hear the delivery driver. That’s how it usually starts in Summerlin: a guest presses the code, nothing happens, and you walk out to let them in by hand for a week before it gets old. The part itself is rarely expensive. What fails is the connection between the keypad, the receiver, and the control board, and that’s the part worth getting right the first time.

Which Mighty Mule Models This Applies To
Mighty Mule keypads and intercoms show up across the single-arm and dual-arm residential lines, and the part you need depends on the series and the vintage of the control board, not the brand name on the arm. The wireless keypads that pair with Mighty Mule operators typically carry their own frequency and receiver pairing, and a replacement has to match the receiver generation installed on your board or it won’t learn the code no matter how many times you press “set.” Wired intercom stations on the same properties use low-voltage runs back to the transformer and can be swapped without touching the operator, but the wire gauge and the run length have to be checked before anyone orders a replacement. We identify the correct part by reading the model plate on the operator housing, checking the receiver label, and measuring the keypad footprint on the post, since post-mount plates vary by generation. On the OEM-versus-aftermarket question, we’ll tell you plainly which Mighty Mule replacement part matches your unit and where a quality equivalent does the same job for less. We’re an independent service provider, not affiliated with Mighty Mule, so our recommendation is about what fits your gate, not what’s on a shelf.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Mighty Mule Keypad & Intercom Repair Is Failing
Most Summerlin owners find out the keypad has failed the same way: the gate opens from the car, and doesn’t open from the post. Here’s what we see most often, and what’s usually behind it.
- The code stops working but the remote still does. The keypad’s internal battery or the receiver pairing has dropped, or the keypad button membrane has worn through after years of Las Vegas Valley sun and grit. The gate operator is fine; the keypad has stopped talking to it.
- Keys feel soft, sticky, or unresponsive. Sun exposure and fine desert dust work into the keypad face and break down the membrane contacts over time. Once the buttons lose their snap, the fix is a replacement keypad rather than a repair.
- The intercom buzzes, crackles, or one direction of audio dies. Usually a corroded connection at the station or a failing speaker element. Monsoon-season humidity and temperature swings push moisture into weather seals that have dried out.
- The gate opens, but only every third or fourth press. That’s typically a signal-strength problem between keypad and receiver, not a dead keypad. It may be a battery on its way out, or interference from a newer wireless device on the property.
- The keypad is dead, no lights, no beep. On a wired unit this points to the low-voltage transformer or the run to the post; on a wireless unit it’s the battery or the keypad itself. Either way, it’s a quick diagnosis and often a one-visit fix.
Replacement Cost & What’s Included
Keypad and intercom work on Mighty Mule gates in Summerlin generally lands between $185 and $420 installed, with most single-unit replacements in the $185 to $275 range and intercom or combined jobs toward the upper end. The range moves with three things: whether the part is wired or wireless, the access and run length to the post, and whether we’re replacing the keypad alone or the receiver with it. We don’t carry parts on a truck and we don’t stock Mighty Mule parts locally; the correct part is ordered for your unit, and you get the price in writing before anyone starts. That price is settled before a single bolt is turned, so the bill matches the quote. Every repair is backed by our written 90-Day Done Right Promise, and most of this work is done in a single visit once the part is on hand. Standing offer: $50 off any repair over $250, plus a 5% Senior and Veteran discount, always.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can safely check yourself. Confirm the keypad has power or a fresh battery, look for obvious water intrusion or cracked seals, make sure nothing has been pressed against the keypad face, and note whether the remote still opens the gate. That tells you whether the operator or the keypad is the problem. Where DIY goes wrong is the low-voltage side: working at the transformer, tracing a buried or post-mounted run, or trying to re-pair a replacement keypad to a receiver that isn’t the right generation. Get the pairing wrong and you can spend an afternoon pressing codes that were never going to work. This isn’t a part where the mistake is dangerous, but it is one where guessing costs you more than a service call. Our technicians have up to 13 years of experience, and a live person answers at (866) 623-9848, 24 hours a day, seven days a week.
FAQs
Expect six to ten years from a keypad and seven to twelve from a wired intercom station in Summerlin, with the low end more likely on a west- or south-facing post that takes full afternoon sun. Sun, dust, and the temperature swings between a 110-degree summer and a cool winter night are what wear the seals and membranes first, not the electronics.
Usually no, and that’s the honest answer. Keypad failures are almost always in the membrane and button contacts, which aren’t serviceable on these units, so a replacement is the right call and typically the cheaper one. Intercom stations are different: a corroded connection or a bad speaker can sometimes be repaired on the spot. We’ll tell you which you’re looking at before you commit to anything.
A straightforward single-keypad replacement on a Mighty Mule operator is usually under an hour once we’re on site, and a wired intercom takes a bit longer because of the run check. Pairing, coding, and testing with you present adds a few minutes. The appointment itself is scheduled, not dispatched same-day, because the part is ordered to match your unit.
We read the model and receiver on your operator, order the part that matches your Mighty Mule generation, and confirm it works before we leave. That’s what the upfront written price covers. We service Mighty Mule alongside LiftMaster, Ghost Controls, and DoorKing, so the correct fix is the one we make on the first visit. Call (866) 623-9848 for a free estimate.
Talk to a Live Person in Summerlin
If your Mighty Mule keypad has gone quiet or the intercom is crackling, we can put eyes on it and give you a straight price. We’ve been serving Summerlin homeowners for over 42 years, founded in 1984, and we plan to be here another forty. Call (866) 623-9848 for a free estimate: a live person answers 24 hours a day, seven days a week, and the price is settled before any work begins. Done right, and backed in writing.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.