A Ironworks company - serving Summerlin, NV

Driveway Gate in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Driveway Gate in Summerlin, NV

A driveway gate in Summerlin costs $4,200 to $11,500 installed for most single-leaf swing gates, and $5,800 to $14,000 for a dual-leaf or sliding gate with automation. That range covers the gate leaf, posts, hinges, and the opener and safety loop. What moves the number fastest is the material and the slope of your driveway, not the size of the opening.

We build, hang, weld, and automate driveway gates for homeowners across Summerlin. Hinges, welds, keypads, and motors are all part of the same job for us, so you are not calling a welder on Monday and an electrician on Friday. If you are still deciding between a new gate and a full replacement, start with our Gate Installation in Summerlin page, then come back here. For a free estimate you can call Ironworks Gate Co. Summerlin at (866) 623-9848. A live person answers, day or night.

Key Takeaways

  • Most single-leaf swing gates in Summerlin run $4,200 to $11,500 installed, automation included.
  • Summerlin’s soil, wind, and 4,000-foot elevation drive hinge and post failures more than anything else.
  • The HOA architectural review comes before the garage dig, not after, and it can add two to six weeks.
  • Every job is covered by our written 90-Day Done Right Promise.

When You Need Driveway Gate

A driveway gate is not a frill. For a lot of homes in Summerlin, it is the only thing between the street and a wide-open driveway, a side yard, or a back court that has never had a fence. Here are the situations we see most, and what usually prompts the call.

  • The old gate dropped and drags. A gate that scrapes the driveway is almost always a post that has settled. In The Ridges and Red Rock Country Club, we regularly see posts pulled out of line by expansive clay that swells after monsoon season and shrinks again by June. Re-hanging on a new footer fixes it; adjusting the hinge will not.
  • A gate that will not stay closed in the wind. Summerlin sits above 3,000 feet and the west-side wind funnels through the ridges. A single leaf wider than about 12 feet catches that wind like a sail. If your gate swings open on gusty afternoons, the answer is usually a stronger hinge set, a drop rod, or a rethink toward a sliding gate.
  • You want to stop the driveway from being open to the street. The Villages and Sun City Summerlin have plenty of lots where the driveway runs straight to the road, and a gate is the simplest way to close that line without a full property fence.
  • You are adding automation to a gate that has always been manual. A well-built iron gate from 2004 can absolutely be automated today, but the posts and hinges have to be sound first. We will not bolt a new Mighty Mule or LiftMaster arm to a gate that is going to fail in six months.
  • You are replacing a gate the builder put in. Production gates in the newer Summerlin West neighborhoods often use lighter tube and thinner posts than the wind and sun warrant. When they start sagging at year eight or ten, a heavier custom gate is worth the money the first time.
  • You want keypad or app entry. If the gate is new and the access control is new, we can wire both in one visit. If the gate is existing, we will check the hinges before we quote the keypad.

Our Driveway Gate Process

We do the same steps whether the gate is a 12-foot single leaf or a 20-foot double. Most jobs are completed in a single visit once materials are in hand, and our technicians have up to 13 years of experience with this work.

  1. On-site measure and site check. We measure the opening, check the slope and cross-fall of your driveway, look at soil and drainage, and note any HOA or setback constraints. This is also where we ask what the gate has to do: privacy, security, access for a trailer, or a gate the grandkids can open without a remote.
  2. Material and design quote, in writing. You get a written price for the gate leaf, posts, hinges, finish, and automation, settled before a single bolt is turned. No surprises on the bill. If you have a written estimate from another company, we will give you a free second opinion on it.
  3. HOA and permit check. Most Summerlin communities require an architectural submission before a new gate goes in. We will tell you exactly what the board will want to see, and we handle the install to those specs. This step is why gates in Summerlin sometimes sit for a few weeks between quote and install; the review is the wait, not the work.
  4. Excavation and post setting. Posts are set in concrete footers sized for the gate weight and the local soil. We do not hang a 400-pound leaf on a footer meant for a six-foot fence panel.
  5. Fabrication, welding, and hanging. The gate is built square and welded at the shop, then hung and trued on site. We check the latch, the swing, and the stop before we touch the automation.
  6. Automation, safety, and handoff. The opener is installed and calibrated, the safety loop or photo-eye is tested, the keypad and remotes are paired, and we walk you through the whole thing before we leave. Every completed job is protected by our written 90-Day Done Right Promise. If something is not right, we come back and make it right.

Driveway Gate Pricing in Summerlin

Here is what driveway gates actually run in Summerlin right now, broken out so you can see where the money goes. These are installed prices, not estimates fenced around with exclusions.

Item Typical range in Summerlin
Single-leaf swing gate (12-14 ft), steel, manual $4,200 – $7,200
Dual-leaf swing gate (16-20 ft), steel, manual $6,200 – $10,500
Sliding gate (14-20 ft), steel or aluminum $7,900 – $14,000
Swing opener (LiftMaster, FAAC, or BFT arm) $1,300 – $2,600
Sliding opener, installed $1,700 – $3,200
Keypad or access control, wired $450 – $1,200
Custom ironwork, per linear foot of gate $220 – $420

What moves the price:

  • Material. Steel tube is the workhorse. Aluminum costs more but will not rust in the Summerlin sun. Custom forged ironwork runs highest and is what most of the Red Rock Country Club and The Ridges gates use.
  • Automation brand. We are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Some brands cost more up front and save you on service over fifteen years; some are the reverse. We will tell you which is which for your gate.
  • Post and footer work. If the existing posts are sound, this is a small line item. If they have to come out, expect it to climb.
  • Finish. Powder coat holds color in the desert sun far longer than paint. It costs more at install and less over ten years.
  • HOA review fees. Some Summerlin boards charge a review fee of their own. That is a pass-through to the board, not to us, and we will flag it before you commit.

We give you the whole number before we start, and the price does not move once work begins. Current standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (866) 623-9848 for a free estimate.

FAQs – Driveway Gate

How much does a driveway gate cost in Summerlin, NV?

A driveway gate in Summerlin typically costs $4,200 to $11,500 installed for a single-leaf swing gate with automation, and $6,200 to $14,000 for a double-leaf or sliding gate. The swing in that range is mostly material and automation brand, not the size of the opening. Call (866) 623-9848 for an exact quote. Estimates are free, and we settle the price before any work starts.

Do I need HOA approval before I install a driveway gate in Summerlin?

Yes, in most Summerlin communities you do. Nearly every HOA here requires an architectural review submission before a new driveway gate goes in, and the board will want drawings, material, color, and dimensions. We have handled this a lot in The Ridges, Red Rock Country Club, and the Sun City Summerlin villages, and we will tell you what your board is going to ask for so the review does not bounce. The review is the reason a Summerlin gate job sometimes sits for two to six weeks between quote and install.

Can my existing gate be automated rather than replaced?

Usually yes, as long as the posts and hinges are sound. A steel gate hung in the early 2000s can take a new LiftMaster or FAAC arm and run for another fifteen years. What we will not do is bolt automation onto a gate with a dragging leaf or a settled post, because it will eat the motor. The on-site check tells us in about twenty minutes which direction makes sense. Call (866) 623-9848 and we will get a technician out to look.

How long does a driveway gate installation take in Summerlin?

Most driveway gate installs in Summerlin are done in one to two days of on-site work, once materials and HOA approval are in hand. Custom forged ironwork takes longer at the shop. If you want the fast answer: the gate itself is quick. The HOA review and the shop time are what set the calendar. Call (866) 623-9848 to get your job on the schedule and we will tell you honestly how long yours will take.

Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin.

Need Gate Repair help in Summerlin? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch