Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Summerlin, NV
A pedestrian gate is the walk-through gate beside your driveway gate: the smaller leaf that lets people come and go on foot without opening the main span. Homeowners in Summerlin add one when the driveway gate becomes the only way in and out, when kids or guests end up climbing through a gap, or when a side yard needs its own controlled entry. We build and hang walk gates that swing true, latch clean, and line up with the rest of your fence line. If you’re still planning the whole project, start with our overview of Gate Installation in Summerlin and we’ll fold the pedestrian gate into it. Call (866) 623-9848 and we’ll talk through your yard.
This is the kind of job where the details decide whether you think about the gate again. Hinge placement, post depth, latch height, and the gap under the leaf all have to be right the first time, because a walk gate that sags after a season is worse than no gate at all. Our technicians have up to 13 years of experience, and we service the automation side too, including LiftMaster and FAAC operators, so the pedestrian gate and the main gate work as one system instead of two.
Key Takeaways
- A pedestrian gate is the walk-through leaf beside your driveway gate – separate hardware, separate swing, same fence line.
- Most Summerlin walk gates fall in the $1,200 to $3,800 range installed, depending on width, material, and whether you want it self-closing or tied to access control.
- We settle the price upfront before we start, and every job carries our written 90-Day Done Right Promise.
- A live person answers the phone 24 hours a day, 7 days a week.
When You Need Pedestrian Gate
Most calls we get aren’t about a gate that failed. They’re about a gate that was never there, and the daily workaround has worn thin. Here’s what we hear from homeowners around Summerlin.
- The driveway gate is the only door. Every mail run, every dog walk, every visitor means opening a full-width driveway gate. In communities off Town Center Drive and around The Trails, that means a motor cycling far more than it should. A walk gate takes the daily foot traffic off the main operator.
- Guests press the wrong button. Visitors who don’t know your keypad or remote end up buzzing the house or waiting in the street. A pedestrian gate with its own keypad or a simple thumb latch lets people walk in on their own terms.
- Kids and dogs slip the gap. When the driveway gate sits on a slope or the fence line steps, there’s often an open corner where the yard is technically enclosed but practically not. A walk gate closes that gap cleanly.
- A side yard needs controlled access. Pool equipment, trash cans, an ADU entrance, or a service yard that should be reachable by the homeowner but not the street. A pedestrian gate gives you the access without opening the whole property.
- The old walk gate has sagged. Wooden walk gates in Summerlin take a beating from dry heat and sun exposure on west-facing fences. Hinges pull, posts lean, and the leaf drags. We replace the failing hardware and set new posts where the old ones have given up.
- You’re matching the main gate. When the driveway gate is iron and the walk gate is an old wood leaf, the mismatch shows from the street. We build pedestrian gates that echo the driveway gate’s pickets, rails, and finish so the whole entrance reads as one.
Our Pedestrian Gate Process
This is how a pedestrian gate job runs from the first call to the final walk-around. The order matters – measuring before you quote and setting posts before you hang anything is what keeps a walk gate from sagging in year two.
- Measure the opening and the swing. We come out and measure the actual gap, check the grade, and figure out which way the gate should swing so it doesn’t foul a wall, a planter, or the driveway gate. Slope matters in Summerlin – a fence on a grade needs a gate that clears the ground through its full arc.
- Quote upfront, before any work. You get a written price with the gate, hardware, posts, and install broken out. Nothing gets added later. If you’re comparing estimates, take the Free Second Opinion on Any Written Estimate – we’ll look at what the other bid covers so you know what you’re comparing.
- Set the posts. Pedestrian gate posts take more lateral load than people expect, because every swing pushes against them. We set posts to depth and check them for plumb before the leaf ever goes on. A sagging walk gate almost always traces back to a post that was never right.
- Build or hang the leaf. We weld or assemble the gate to fit the opening, hang it on hinges rated for its weight, and set the latch so it catches cleanly without a lift. If you want it self-closing, the closer gets tuned so it shuts firmly without slamming.
- Wire access control if you want it. A keypad, a push-button, or a fob reader on the walk gate gets wired and tested on the spot. We work with the major access-control brands, and we can tie the pedestrian gate into the same system as the driveway gate so you’re not juggling two codes.
- Walk it through with you. Before we leave, you swing it, latch it, and lock it yourself. If something catches, we fix it then. Every job then rides on the 90-Day Done Right Promise – written, no arguing, if it isn’t right we come back.
One safety note that matters for anyone thinking about a motorized walk gate: gate operators for pedestrian use are a different animal than driveway operators, and they carry specific reversal and entrapment requirements. We handle that side the right way, and we don’t hand a homeowner a motor and a set of instructions and hope for the best.
Pedestrian Gate Pricing in Summerlin
Pedestrian gate installation in Summerlin generally runs $1,200 to $3,800 installed, with most single walk gates landing around $1,800 to $2,600. The low end covers a straightforward steel leaf on standard posts. The high end covers a wider gate, decorative ironwork to match an estate gate, or a self-closing hinge and a keypad wired in. Here’s how the line items break down.
| Item | Typical Summerlin range |
|---|---|
| Standard steel pedestrian gate, installed | $1,200 – $1,900 |
| Decorative iron walk gate matching driveway gate | $2,000 – $3,800 |
| New posts set and plumbed (pair) | $350 – $700 |
| Self-closing hinge or closer installed | $180 – $420 |
| Keypad or push-button access control | $350 – $800 |
| Replacing a sagging walk gate on existing posts | $600 – $1,400 |
What moves the price most is material and width. A narrow utility walk gate is a different job from a 5-foot decorative gate meant to match an iron driveway span. Access control adds on the automation side. Grade adds on the install side, because a gate on a slope needs more hardware to swing true. We settle all of it in the upfront quote, so the number you agree to is the number on the bill.
If the pedestrian gate is a small part of a larger job, we’ll price the whole thing together. Restoration work on an existing gate – rewelding hinges, replacing a bent frame – often costs less than a full replacement, and we’ll tell you which one you actually need rather than selling you the bigger job. We service Mighty Mule and BFT operators alongside the gate itself, so if the walk gate is part of an automated entry, the estimate covers all of it.
Pedestrian Gate vs. Driveway Gate: What’s the Difference?
A pedestrian gate is built for foot traffic; a driveway gate is built for vehicles. That difference changes everything about the hardware. The walk gate is lighter, swings on closer-set hinges, and is sized for a person to clear easily, usually 36 to 48 inches wide. The driveway gate carries far more weight, needs heavier posts and heavier operators, and is measured for a vehicle plus clearance. The two can share a fence line and a finish, and in Summerlin homes they often do, but they’re separate jobs with separate parts. If the driveway side is what you need, our home page and full gate service overview cover the larger span.
FAQs – Pedestrian Gate
How much does a pedestrian gate cost in Summerlin?
Pedestrian gate installation in Summerlin typically costs $1,200 to $3,800, with most single walk gates around $1,800 to $2,600 installed. Material, width, posts, and access control move the number. Call (866) 623-9848 for an exact quote – estimates are free.
Can you install a pedestrian gate the same day?
Many pedestrian gate jobs are completed in a single visit, especially a replacement leaf on existing posts. A brand-new gate with new posts and wiring sometimes needs a second trip. We’ll tell you which it is when we quote. Call (866) 623-9848 and we’ll get you on the schedule.
Can a pedestrian gate be self-closing or motorized?
Yes. A self-closing hinge handles most walk gates, and a motorized pedestrian gate is possible with the right operator and safety hardware. Because motorized walk gates carry entrapment requirements, we size and wire the operator for the gate rather than guessing. Call (866) 623-9848 to talk through the options.
Is it cheaper to repair a sagging pedestrian gate or replace it?
Repair is usually cheaper when the posts are still sound and only the hinges or latch have failed. Replacement makes more sense when the post footing has given way or the leaf is bent beyond saving. We’ll tell you which one your gate falls into before you spend a dollar. Call (866) 623-9848 for a free look.
Service Across Summerlin
We work pedestrian gates throughout Summerlin, from the established streets of The Trails and Sun City Summerlin to the gated communities around Red Rock and the newer homes off Far Hills. Every job carries the same 90-Day Done Right Promise, whether it’s a small replacement leaf or a decorative iron walk gate built to match an estate entry. Standing offers include $50 Off Any Repair Over $250, the Free Second Opinion on Any Written Estimate, an $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount. A live person answers the phone, day or night, and we’ll come out, look at the opening, and give you a straight number before anything gets ordered.
Call Ironworks Gate Co. Summerlin
A pedestrian gate should be the easiest thing on your property to live with: swing it, latch it, forget it. If yours drags, doesn’t latch, or isn’t there yet, we’ll come out and make it right. Call (866) 623-9848 for a free estimate and we’ll take it from there.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin.