Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Keypad & Intercom Repair: The Summerlin Owner’s Guide
DoorKing keypad and intercom repair in Summerlin typically runs $285 to $720 installed, depending on whether we’re swapping a keypad, a intercom module, or both, and whether the wiring to the pedestal is sound. Most repairs are completed on the first visit, and we answer the phone 24 hours a day when the gate stops talking to the house at an inconvenient hour.

Owners usually find out the hard way. The gate opens fine from the car remote, but the keypad at the pedestrian walk stops lighting up, or the intercom buzzes but nobody can hear a voice on either end. Sometimes the code works for a week and then doesn’t. In Summerlin, the first clue is often a call from a delivery driver who can’t get in, because the keypad cap has gone cloudy and the buttons have stopped registering a press.
Which DoorKing Models This Applies To
DoorKing keypads and intercoms turn up on a wide range of residential installations, and matching the replacement to the right unit matters more than most homeowners expect. The common residential lines are the 1500-series keypads, the 1800-series intercom and telephone-entry units, and the 1812, 1833, 1835 and 1837 entry systems, alongside the 6000-series swing and slide operators that these accessories are wired into. If your keypad has a green or red LED display and a metal housing on a freestanding pedestal, it’s very likely a 1500-series. If there’s a speaker grille and a call button, you’re looking at an intercom unit from the 1800 family.
To identify the right part, look for the model sticker inside the housing door, or on the backplate if the front is sealed. Measure the faceplate width and the mounting hole spacing; DoorKing has used more than one footprint over the years, and a keypad that looks identical on the front can have a different backplate. If the sticker is gone, photograph the board and the terminal strip and we’ll match it. OEM DoorKing parts cost more but drop straight in. Quality aftermarket equivalents save 20 to 35 percent and are reliable for keypads, but for intercom boards we lean OEM because the audio circuitry and line-matching are fussier. Ironworks Gate Co. Summerlin is an independent service provider and not affiliated with DoorKing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your DoorKing Keypad & Intercom Repair Is Failing
- Keypad lights are dark but the gate still opens from the remote. That points to lost low-voltage power at the keypad, not a dead keypad. Often a corroded splice in the pedestal or a failed transformer tap.
- Buttons work intermittently or need a hard press. The membrane or tactile switches have worn through. Summerlin’s dry heat and the UV load on a west-facing pedestal break down the plastic overlay faster than most of the country sees.
- Intercom buzzes but no voice passes either way. Usually the speaker or microphone element has failed, or the twisted pair to the house has water in it. We check the line before we sell you a board.
- The unit beeps or chatters with no input. A failing control board or a bad ground. On 1800-series units this is often the phone-line interface giving up.
- Codes accepted but the gate doesn’t move. The keypad is fine; the relay output or the wiring back to the operator has failed. This is a common misdiagnosis and worth testing before buying any part.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here in Summerlin, keypad and intercom repair pricing breaks down like this:
| Job | Installed Range |
|---|---|
| Keypad replacement (1500-series, like-for-like) | $285 – $420 |
| Keypad replacement with new pedestal wiring | $380 – $560 |
| Intercom unit replacement (1800-series) | $420 – $720 |
| Board-level repair or relay replacement | $185 – $320 |
| Transformer or low-voltage power repair | $160 – $290 |
What drives the range: whether the pedestal wiring needs to be rerun, whether the unit is surface-mount or flush, and whether the operator’s control board also needs attention. We quote the price upfront and settle it before a single bolt is turned, so there are no surprises on the bill. Every completed repair is backed by our written 90-Day Done Right Promise.

DIY or Call Us?
There are a few things you can safely check yourself. Confirm the breaker to the gate operator hasn’t tripped, look inside the keypad housing for obvious water or insect intrusion, and make sure the small transformer feeding the keypad is plugged in and warm. That’s the limit of what’s safe.
Beyond that, this is low-voltage work that lives inside a 120-volt circuit and a live gate operator. The keypad and intercom wiring runs alongside the operator’s control wiring, and one crossed lead can back-feed the board or send the gate moving when it shouldn’t. If the cover has to come off the operator cabinet or the transformer box, that’s the point to stop and call. We’re trained on nine gate-automation brands including DoorKing, LiftMaster and Mighty Mule, and we carry the correct replacement on the first visit in most cases. Call (866) 623-9848 for a square deal and a free estimate.
FAQs
Eight to twelve years is typical for a keypad in Summerlin’s climate; intercom units usually run ten to fifteen before the audio components drift. West-facing pedestals in direct afternoon sun run closer to the short end of that range.
Sometimes, yes. Relay failures, membrane swaps on some 1500-series units, and intercom speaker replacements are all repairable, typically for $185 to $320. If the control board is conformally damaged or the housing is cracked through, replacement is the better money.
A like-for-like keypad swap runs about an hour; intercom replacement with line testing runs two to three hours. If the pedestal wiring needs rerunning, plan on a longer visit.
We match the specific model and backplate from the label or a photo of the board, then order the correct OEM or approved equivalent from our supplier network. We don’t claim to carry parts on a truck; we source what fits your unit and return with it, which is why the match is right the first time.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.