Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Summerlin Homeowners Choose DoorKing Gate Repair
We provide independent DoorKing gate repair in Summerlin, and what sets our DoorKing work apart is depth: our technicians work on Model 6400 swing operators, 6050 slide operators, 1601/1603 barrier gates, and 1812/1833 telephone entry systems regularly, not once a year. That matters because DoorKing equipment runs on proprietary logic boards and coded entry peripherals that reward familiarity.

We are an independent DoorKing service provider. We’re not affiliated with, authorized by, or sponsored by DoorKing. We’re gate specialists who know the product line inside and out, and we serve homeowners across Summerlin, from The Trails to The Ridges. Call (866) 623-9848 and a live person answers, day or night.
Why Trust Ironworks Gate Co. Summerlin for Your DoorKing Gate Repair?
DoorKing makes equipment that punishes guesswork. The control boards on a 6400 or 6050 are proprietary, the DIP switch and programming logic is specific to each model, and the entry systems in the 1812 and 1833 families hold their programming in ways a generalist won’t anticipate. Our technicians have up to 13 years of experience, and the ones who handle DoorKing calls are the ones who’ve learned its behavior on real driveways in Summerlin.
We use DoorKing OEM control boards, limit switches, and entry-system modules where the model’s firmware and connector pinouts demand an exact match. For batteries, loops, safety edges, and hinges, quality aftermarket parts do the job at a fairer price, and we’ll tell you which is which before we order anything.
Warranty-safe practice is part of the work. We document what we replace, match OEM where the manufacturer expects it, and don’t cut corners that put your coverage at risk. Every DoorKing job we finish is covered by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common DoorKing Gate Repair Problems We Fix in Summerlin
DoorKing failures follow patterns, and knowing the pattern is most of the diagnosis. Here are the ones we see most often on Summerlin gates.
- Control board failure on 6400 and 6050 operators after a surge. The gate stops mid-travel or reverses erratically, and the diagnostic LED blinks a code. Summerlin’s summer thunderstorms and lightning-adjacent surges cook these boards, and the blinking LED is the model telling you what happened. We read the code, confirm the board is the fault, and replace with OEM so the firmware and pinouts match.
- Slide-gate limit switch and magnetic encoder drift on the 6050. The gate over-travels, stalls, or fails to close fully and then re-opens on the next cycle. Desert dust and heat-cycled metal slowly shift these settings, and the fix is re-learning travel limits and checking the encoder before anyone touches the motor.
- Telephone entry and keypad boards losing programming. On the 1511 and 1812 series, a power cycle can wipe the directory, kill the LCD, or leave the unit unable to dial out. These boards hold programming in components that age badly in heat, and the fault is usually in the board, not the phone line.
- Battery-backed operators failing to release or hold. The 12V and 24V backup batteries in DoorKing operators are sealed, and in Summerlin heat they age out faster than the manual suggests. When the battery is done, the gate won’t hold position or release cleanly during an outage.
- Wind-load hinge and latch strain on swing gates. Gusty winds off the Spring Mountains put real load on 6400 swing arms and hinges. Over time the gate sags, the latch misaligns, and the operator strains to compensate. The operator gets blamed; the hinge is often the cause.
DoorKing Parts & Our Repair-vs-Replace Approach
DoorKing parts aren’t interchangeable with other brands. The control boards, limit switches, and entry modules are model-specific, and a board that looks similar won’t run your operator’s firmware. We order OEM DoorKing parts for anything where the model demands an exact match, and we say so plainly when we do. For batteries, loop detectors, safety edges, and hinges, quality aftermarket is fine and usually cheaper.
We don’t keep a local stock of DoorKing parts, so lead time on a board or module depends on the model. We’ll tell you the wait before you commit, and the price is settled upfront before any work starts. No invoice surprises.
Repair beats replacement on most 6400 and 6050 operators. If the gearbox and motor are sound, a board or limit fix brings the gate back. Full operator replacement is honest only when the chassis, gearbox, or motor is genuinely gone, and we’ll show you why. Call (866) 623-9848 for a free second opinion on any written estimate.
Our DoorKing Service Process – Step by Step
- 1
Diagnosis. We confirm the operator model, read the fault LED, and check the limit and encoder settings before touching anything. On a 6050 slide gate, that means verifying travel limits and safety-edge inputs first.
- 2
Repair or install. We replace the confirmed fault with the right part, whether that’s an OEM board, a limit switch, or a battery. The price is agreed before we start.
- 3
Test. We cycle the gate through full open and close, check the safety edges and loops, and confirm the entry system dials out. Nothing leaves until it works.
- 4
Warranty. Every job is backed by the written 90-Day Done Right Promise. If a DoorKing gate we fixed acts up, we come back.
See the difference
Before
After
Before
After
Before
AfterDoorKing Products We Service & Install in Summerlin
We service the DoorKing lines Summerlin homeowners actually have on their driveways: the Model 6400 swing gate operator for residential and light commercial swing gates, the Model 6050 slide gate operator, the Model 1601 and 1603 barrier gate operators, and the Model 1812 and 1833 telephone entry and access control systems. That covers motor repair, battery backup, phone entry, and the access control peripherals around them. If your model isn’t listed, call and we’ll confirm coverage.
We Also Service These Brands
DoorKing is one brand among nine we’re trained and equipped to service. We also handle LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. If your Summerlin property has a mix of gates on different operators, one call covers them all. We work on LiftMaster and Mighty Mule swing and slide operators just as readily as DoorKing.
FAQs – DoorKing Gate Repair Service in Summerlin
No. We’re an independent DoorKing service provider. We’re not affiliated with, authorized by, or sponsored by DoorKing. We service DoorKing equipment as trained gate specialists who work on the product line regularly, and we’re upfront about that.
Yes, where the model requires it. We use OEM DoorKing control boards, limit switches, and entry-system modules whenever the firmware and connector pinouts demand an exact replacement. For batteries, loops, safety edges, and hinges, quality aftermarket parts do the job at a lower price, and we’ll tell you which is which before ordering.
Most DoorKing repairs are completed in a single visit when the part is on hand. If a control board or entry module has to be ordered for your specific model, lead time depends on the model, and we’ll give you the wait before you commit. Call (866) 623-9848 to schedule.
We cover the Model 6400 swing operator, the Model 6050 slide operator, the Model 1601 and 1603 barrier gates, and the Model 1812 and 1833 telephone entry and access control systems. If your model isn’t listed, call (866) 623-9848 and we’ll confirm.
Not when the work is done correctly. We match OEM parts where the manufacturer expects them, document what we replace, and avoid shortcuts that put your coverage at risk. We’re independent, so we can’t speak for DoorKing’s warranty terms, but we do warranty-safe work.
DoorKing gate repair in Summerlin typically runs $200 to $650 depending on the fault, with board replacements on the higher end and limit or battery fixes on the lower end. The price is quoted and agreed before any work starts. Call (866) 623-9848 for an exact quote. Estimates are free.
Book Your DoorKing Service in Summerlin, NV
If your DoorKing gate is faulting, reversing, or failing to dial out, call (866) 623-9848. A live person answers 24 hours a day, 7 days a week. We’ll diagnose the model, quote the repair upfront, and back it with our written 90-Day Done Right Promise. Free estimates on every job.
Written by the team at Ironworks Gate Co.