Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateElite Keypad & Intercom Repair: The Summerlin Owner’s Guide
Elite keypad and intercom repair in Summerlin runs about $185 to $420 installed for a keypad swap and $240 to $650 for intercom work, depending on the model and what failed. Most Summerlin jobs are scheduled within a few days, and a live person answers our phone 24 hours a day to book it. We’re an independent gate service, not affiliated with Elite, and we’re trained on the Elite line specifically.

Owners rarely wake up to a dead keypad with no warning. The failure usually creeps. The code works, but only on the second or third try. The intercom crackles when the afternoon sun hits the post. The gate stops responding from the driveway keypad but opens fine from the car remote. In Summerlin, where summer afternoons sit above 100°F for weeks and winter nights still drop into the 30s, the outdoor keypad housing takes a beating. We see weather-seal failures and sun-cracked buttons far more often than actual board failures.
Which Elite Models This Applies To
Elite makes a range of residential access controls, and the keypad and intercom assemblies are not interchangeable across every model line. The two things that matter are the series your unit belongs to and the physical footprint of the assembly in the post. Before we order anything, we read the model plate on the inside of the housing cover and measure the cutout in the pedestal. That’s the difference between a part that drops in and one that comes back.
Two specific compatibilities bite owners in Summerlin. First, older Elite keypads with separate intercom units can’t be swapped for a newer integrated keypad-intercom assembly without changing the post wiring and, often, the power supply at the gate operator. Second, the post-mount and flush-mount versions look identical in photos but have different backing plates and screw patterns. Ordering by photo is how a two-hour job becomes a return-and-reorder.
On the OEM-versus-aftermarket question: for the keypad membrane and button pad, a quality aftermarket part holds up as well as OEM at a lower price, and we’ll say so when it’s true. For the intercom board and the speech unit, we lean OEM or a listed equivalent, because the audio quality and the voltage tolerance are where cheap replacements fail fast. We don’t claim to stock parts or carry them on a truck. We source the correct part for your Elite model and come back to install it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Elite Keypad & Intercom Repair Is Failing
- The code works, but only sometimes. Usually a worn membrane or a button pad that’s lost contact from sun and heat cycling. The board is often still good.
- Buttons feel soft, stuck, or don’t click. The rubber dome under the button has cracked. This is the most common failure we see on Summerlin keypads after several summers of direct sun.
- The intercom crackles, cuts out, or you can’t hear the visitor. Often a failed speech unit or a corroded connection at the post, not the whole intercom. Sometimes it’s just the wiring termination.
- The gate stops responding from the keypad but opens from the remote. That points to the keypad-to-operator signal path or the keypad’s power feed, not the gate motor. Good news: it’s usually a keypad-side repair.
- The keypad is dead, no lights, no beep. Could be the keypad itself or a failed power supply at the operator. We test both before quoting, so you don’t pay to replace the wrong part.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest range for Summerlin, parts and labor together:
| Job | Typical Installed Price |
|---|---|
| Elite keypad replacement (standard post-mount) | $185 – $320 |
| Elite keypad replacement (flush-mount or integrated unit) | $260 – $420 |
| Intercom speech unit or board repair/replacement | $240 – $480 |
| Full keypad-plus-intercom assembly swap | $420 – $650 |
| Wiring or power supply correction at the post | Quoted after diagnosis |
What drives the range: the model, whether the post wiring needs correction, and whether we’re sourcing an OEM or a quality aftermarket part. The price is quoted and agreed before any work starts, so there are no surprises on the bill. Every job is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right.
DIY or Call Us?
You can safely check a few things yourself. Confirm the gate operator still has power and opens from the remote. Look at the keypad buttons for cracks or sun damage. Check that the post housing seal isn’t broken and holding water. That’s about where safe DIY ends.
Where it goes wrong is the wiring. The keypad and intercom run on low voltage, but they share a feed with the gate operator, and the operator’s terminals can carry line voltage depending on how the system was installed. Poking around in a live control box is how a $200 keypad job turns into a service call and a scare. If the keypad is dead or the intercom has gone quiet, let someone who does this daily trace the fault. Call us at (866) 623-9848 and we’ll give you a straight answer on what’s likely wrong before we come out.
FAQs
Expect seven to twelve years from a quality keypad in Summerlin’s climate, and often less if the housing faces full afternoon sun with a broken seal. Heat and UV are what age these parts, not use. An intercom unit typically lasts a similar span, though the speech unit can fail sooner if moisture gets into the post.
Often yes, especially when the board is fine and only the membrane, buttons, or a wiring termination have failed. We test the part before recommending a swap, so you’re not paying for a full replacement when a component repair will do. The honest answer depends on the model and what actually failed.
A straightforward keypad replacement is usually a one-visit job of an hour or two. An integrated keypad-intercom swap or a job that needs post wiring corrected can run longer, which is why we quote before we start. Most Summerlin jobs are completed in a single visit.
We identify your Elite model from the plate inside the housing, measure the post cutout, and confirm the mount type before ordering anything. We don’t claim to stock parts or carry them on a truck; we source the correct part for your model and install it. That’s how we avoid the photo-matching mistake that sends wrong parts back.
Call (866) 623-9848 for a free estimate. We service Elite alongside LiftMaster, Mighty Mule, Ghost Controls, and other major gate automation brands. Current offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% Senior and Veteran discount.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.