A Ironworks company - serving Summerlin, NV

FAAC Gate Repair in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

FAAC Gate Repair in Summerlin: What to Know First

We provide independent FAAC gate repair in Summerlin, and most of the FAAC arm operators and swing operators we see are back in service in a single visit. We work on the actual FAAC hardware in your driveway: the 390 and 391 arms, the 400-series, the S800H and S418 sliding operators, and the C720 control boards behind them. As an independent FAAC service provider, we’re not affiliated with or authorized by the manufacturer, and we don’t pretend to be. What we offer is honest, upfront pricing that’s settled and agreed with you before a single bolt is turned.

Professional welder performing on-site wrought iron gate repair and maintenance. in Summerlin, NV

Call (866) 623-9848

This page is for the homeowner whose gate has started to stutter at the halfway point, or whose FAAC remote stopped working in the last cold snap, or whose operator has simply stopped dead. If that’s you, call (866) 623-9848 and a live person will answer, day or night.

How FAAC Products Fail – and How We Fix Them

FAAC builds solid hardware, and the operators that show up in Summerlin homes are usually well past a decade of service. What fails on them is predictable once you know the line. Here’s what we actually see, and what we do about each one.

  • Encoders and limit switches on the 390 and 391 swing arms. The symptom is a gate that hesitates, reverses partway, or stops at a random point rather than at the end stop. That’s usually the encoder losing its position reference, not the motor failing. On the 390 arm, the encoder disc is small and the set screws back off over years of vibration. We re-seat and recalibrate the encoder and confirm the position reference on the board rather than replacing a motor that’s still fine.
  • Battery-backed control boards on the S418 sliding operator. The S418 and its C720 board carry a battery that keeps the gate working during a power cut. Summerlin gets its share of monsoon-season outages, and a gate that runs once on battery and then dies for good is a real complaint. Nine times out of ten the battery has simply aged out, and the board is throwing a fault that reads like a dead operator. We test the battery under load before we tell you anything else.
  • Arm brackets and hinges on swing gates. FAAC arms are only as good as what they’re mounted to, and on a heavy estate gate the mounting bracket and hinge plates take the load. A worn bottom hinge throws the gate out of plumb, and the arm starts working against a gate that’s dropped a quarter inch. We repair the hinge and post, realign the gate, then come back to the operator – because swapping an arm onto a sagging gate just breaks the new arm too.
  • Control board and radio receiver faults. The C720 board and the onboard receiver in FAAC kits are sensitive to a power surge and to moisture creeping into a control enclosure that sits low on a wall. A gate that opens with the keypad but not the remote, or vice versa, is telling you where the fault lives. We isolate the receiver and the board separately, so you’re not paying for a whole board when only the receiver module has failed.
  • Shear pins and mechanical wear on heavy arms. On the larger 400-series arms driving a full-weight gate, a shear pin is designed to give before something expensive does. When the pin shears, the gate swings free and the arm spins without moving it. That’s the system working, not failing. We replace the pin, then check why it sheared in the first place – usually an obstruction or a hinge that’s binding.

One detail owners won’t find on a spec sheet: aftermarket FAAC control boards for the C720 line have shipped with different firmware revisions, and a board that’s stamped the same part number can behave differently on a 391 arm than the original. We check firmware compatibility against the specific operator before we install any non-OEM board, so the gate doesn’t develop a phantom fault six months later.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our FAAC Gate Repair Process

Every FAAC job follows the same six steps, whether it’s an arm repair or a full board replacement.

  1. 1
    Call and diagnosis. A live person answers and we ask the right questions up front: which FAAC model, what the gate does and when it does it, how long the symptom has been there. That saves time on site.
  2. 2
    On-site testing. We test the operator, the board, the encoder or limit switches, the battery, and the mechanical side – hinges, brackets, gate alignment – together. FAAC faults are often mechanical problems wearing an electrical disguise.
  3. 3
    Parts decision. We tell you honestly whether an OEM part or a quality aftermarket part is the right call for your model, and what each costs. FAAC’s own parts are the safest fit for a newer operator under manufacturer warranty; on a 12-year-old 390 arm, a quality aftermarket encoder or battery is often the sensible choice and we say so.
  4. 4
    The repair. We complete most FAAC jobs in a single visit. The price you agreed to before we started is the price on the bill.
  5. 5
    Testing and hand-off. We cycle the gate through full open and close, test the safety edges and photo-eyes, and check the manual release works. Then we walk you through what we did and what to watch for.
  6. 6
    The guarantee and cleanup. Every FAAC job is backed by our written 90-Day Done Right Promise, and we leave your driveway the way we found it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What FAAC Gate Repair Costs in Summerlin

Here are realistic ranges for the FAAC work we do most often in Summerlin. Your exact quote depends on the model and what we find on site.

FAAC repair Typical range
Hinge, post or bracket repair $180 – $350
Gate realignment $200 – $400
Encoder or limit switch recalibration/replacement $220 – $420
Battery replacement (S418 / C720 board) $250 – $450
Control board or receiver replacement $350 – $650
Arm or operator motor replacement $500 – $1,100

What moves the price is the model, whether the fault is electrical or mechanical, and whether an OEM or aftermarket part is the right call. We quote and agree the price with you before any work starts, so there are no surprises on the bill. Our standing offers apply too: $50 off any repair over $250, and a free second opinion on any written estimate. Call (866) 623-9848 for a free estimate.

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for FAAC Work

Our technicians have up to 13 years of experience and are trained and equipped on nine gate-automation brands, not just FAAC. That matters when your FAAC arm shares a driveway with a LiftMaster operator, or when a FAAC diagnostic turns out to be a DoorKing access-control issue feeding the same gate. We service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing as well, plus BFT, Linear, Viking, Elite, and Mighty Mule, so the right fix gets made on the first visit whatever is on your driveway.

A live person answers our phone 24 hours a day, seven days a week. Not a voicemail. Not a callback queue. Our technicians are background-checked and uniformed and work in your home the way they would in their own mother’s. Every job, the 400th as much as the first, is backed by the written 90-Day Done Right Promise. When we finish a FAAC repair, we test it, we guarantee it, and we come back and make it right if it isn’t. Summerlin homeowners call because they don’t want to think about the gate again, and we take that seriously.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch