A Ironworks company - serving Summerlin, NV

Ghost Controls Gate Installation in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Installation in Summerlin: What to Know First

We install and repair Ghost Controls gate operators in Summerlin. Most driveway and pedestrian gate jobs are measured, priced and scheduled within a few days of your call, and a straightforward swing or slide install is usually finished in a single visit. You’ll get a written upfront price before any work starts, and the labor is backed by our 90-Day Done Right Promise.

Technicians installing a decorative metal gate with level and power drill in Summerlin, NV

Call (866) 623-9848

This page is for Summerlin homeowners who already own a Ghost Controls unit, or are considering one, and want it hung, wired and dialed in correctly the first time. If that’s you, call (866) 623-9848 and a live person will pick up, any hour, any day.

Key Takeaways

  • We’re an independent Ghost Controls service provider, not affiliated with or authorized by the manufacturer.
  • Ghost Controls solar and low-voltage units are especially common on Summerlin gates with no nearby power.
  • Every install is priced and agreed before a bolt is turned, with a written 90-Day Done Right Promise behind the labor.
  • Our technicians have up to 13 years of experience, and we’re trained on nine automation brands including Ghost Controls.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls isn’t like the heavy commercial hardware you see on a LiftMaster swing operator. The brand leans on low-voltage DC motors, solar-friendly controllers, and lighter-duty swing arms, and the failure patterns follow from that. These are the ones we see most in Summerlin.

  • Solar-charged control boards that brown out in July heat. The Ghost Controls TSS1 and similar solar-ready kits run the board off a battery topped by a panel. Summerlin’s afternoon sun cooks a panel mounted flat on a west-facing gate, and the battery degrades faster than the controller expects. The gate stops partway or the arm reverses at random. We check panel angle, battery health and the board’s voltage cutoff before we ever touch the motor. The real cause is usually a battery, not the operator.
  • Arm brackets pulling out of soft gate frames and masonry. Ghost Controls AXS and AXO swing arms bolt to the gate leaf and the post. On older Summerlin properties, hollow metal frames and stucco-over-block posts don’t hold lag bolts well. The arm works loose, the gate sags, and the limit switches drift. We add through-bolts or a plate onto a solid frame member so the geometry stays square.
  • Entrapment-sensor faults that stop a gate cold. Ghost Controls units use safety edges and photobeams the board watches closely. A misaligned or sun-baked photobeam, or a safety edge with a nicked wire, throws a fault and the gate won’t close. We test the whole safety circuit, replace the failed component, and confirm closed-position operation across the full travel.
  • Control-box wiring that’s too thin or too long a run. The control box is meant to sit close to the operator. On a long Summerlin driveway, a run of undersized low-voltage wire drops the voltage and the board acts erratic. We size the wire for the run and the amperage, not just what’s on hand.
  • Limit switches and magnets out of adjustment after settling. Ghost Controls swinging and sliding units rely on limits to know where the gate stops. On a gate that’s shifted or a post that’s settled, the limits wander and the gate stops short or slams. We re-set limits against the actual gate travel and confirm the reverse test.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Ghost Controls Gate Installation Process

A Ghost Controls job runs the same way every time, whether it’s a new install or a motor replacement on a gate that’s been there for years.

  1. 1
    Call and phone intake. A live person answers and takes the details: gate type, model number, what the gate is doing. No voicemail, no callback queue.
  2. 2
    On-site diagnostics. We check the gate’s swing or slide, the frame and hinges, the existing power, and the Ghost Controls unit itself. We identify what’s actually failing before we quote.
  3. 3
    Parts decision, OEM vs. quality aftermarket. We explain the trade-offs and let you decide. An OEM Ghost Controls board or arm keeps the unit matched to its controller; a quality aftermarket part can save money where it’s safe to. We won’t fit a part we wouldn’t put on our own gate.
  4. 4
    Installation and wiring. Mount, wire the low-voltage run, set the safety edges and photobeams, and dial in the arm geometry.
  5. 5
    Full test. Open and close the gate through its full travel, confirm the reverse test and the safety stop, and check limits hold in both directions.
  6. 6
    Walkthrough and written guarantee. We show you the controls and leave you with the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Ghost Controls Gate Installation Costs in Summerlin

Pricing depends on the gate, the unit and the site, so treat these as real-world ranges from jobs we run in Summerlin, not a fixed menu. Every price is quoted and agreed before any work starts.

Job Typical range
Ghost Controls swing-opener install on an existing gate (single) $850 – $1,600
Double or dual swing-gate install $1,600 – $2,800
Ghost Controls sliding-gate operator install $1,200 – $2,400
Low-voltage or solar control run, including battery setup $250 – $600
Pedestrian / security gate with keypad or access control $500 – $1,400
Diagnostic visit and written estimate Free second opinion on any written estimate

What moves the price: gate weight and width, whether the frame can hold the arm, how far the control box sits from the operator, and whether you want solar. Call (866) 623-9848 for a free estimate on your Summerlin gate.

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for Ghost Controls Work

We’re a dedicated gate company, not a general handyman outfit that happens to own a welder. Ghost Controls is one of nine brands we’re trained and equipped on, alongside LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking and Elite, so if your gate has a different operator, we can still help. Our technicians have up to 13 years of experience and are background-checked and uniformed. A live person answers the phone 24 hours a day, 7 days a week, and most jobs are done in a single visit. Every job is backed in writing by the 90-Day Done Right Promise, the Keystone Standard. And our standing offers are there if they help: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a 5% senior and veteran discount, always.

FAQs

Do you service Ghost Controls gate openers in Summerlin? Yes. Ghost Controls is one of nine gate-automation brands we service and install in Summerlin, both new installs and repairs on existing units. Call (866) 623-9848 and a live person will get you scheduled.

Will installing or repairing my Ghost Controls unit void the manufacturer’s warranty? Installation or repair by an independent provider does not, by itself, void a Ghost Controls warranty, but the manufacturer sets its own terms. We use parts and practices that keep the unit within its intended spec, and we’re happy to walk through any warranty questions before we start. Call for a free second opinion on your estimate.

Can you get Ghost Controls parts, or should I just go aftermarket? We can source both, and we’ll tell you which makes sense. OEM Ghost Controls parts keep the unit matched to its controller and are the safer choice on the board and safety circuit; quality aftermarket parts can save money on brackets and hardware where it’s sound to do so. We decide with you, not for you.

My Ghost Controls gate stopped closing. Is that a repair or a replacement? In most cases it’s a repair. A gate that won’t close is usually a safety-edge or photobeam fault, a battery, or a limit out of adjustment, not a dead operator. We diagnose the actual cause on-site before recommending anything. Call (866) 623-9848 for an exact quote; estimates are free.

How fast can you get out to a Summerlin gate? For repair calls we aim to be there when we say, often the same day, and a live person answers 24/7. New installations are scheduled after we measure and agree on a written price. Call for the soonest slot.

Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch