A Ironworks company - serving Summerlin, NV

Ghost Controls Gate Motor & Opener in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Motor & Opener in Summerlin: What to Know First

Ghost Controls gate motor and opener work in Summerlin is what we do as an independent service provider, and most repairs are finished in a single visit once we’ve confirmed which series you own. Expect a diagnostic and written price before any work starts, so the number you agree to is the number on the bill. Demand here is steady: the DIY-friendly Ghost Controls line is popular on Summerlin estate gates because it’s straightforward to mount and easy to buy, and that same popularity is exactly why we see so many of them needing a proper repair rather than a parts swap. If your gate has stopped, is moving slowly, or is beeping and refusing to cycle, call (866) 623-9848 and a live person will pick up. We’ll tell you what’s likely wrong and what it takes to fix it – no pressure, no surprises on the bill.

Technician performing professional maintenance on an automatic residential gate motor in Summerlin, NV

Call (866) 623-9848

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls builds a good, honest residential operator, and the failures we see in Summerlin are consistent enough that we can usually name the cause before we arrive. Here’s what actually goes wrong, model line by model line, and how our technicians handle each one.

  • Control-board corrosion on the AR/AS single-swing series. Ghost Controls boards sit low in an open housing, and Summerlin’s fine desert dust plus the occasional monsoon downpour find their way into the terminals. The symptom owners describe is a gate that “works, then doesn’t” – cycling fine in the morning and dead by afternoon. We clean and reseat the board, test every terminal, and where the board is genuinely gone we replace it rather than chasing a loose wire all afternoon.
  • Battery and solar-charge failures on the solar-ready units. Many Summerlin gates run on solar because trenching power to a far gate is expensive, and a tired battery is the single most common cause of a gate that slows, stalls, or won’t open after a cool night. A battery that reads fine on a voltmeter can still sag under load. We load-test it, check the charge controller and panel angle, and only replace what’s actually failing.
  • Limit-switch drift on sliding and swing operators. Over a hot Summerlin summer, the metal in a gate expands and the operator’s travel limits creep a little each season until the gate stops short or over-travels and trips the safety reverse. That’s a calibration job, not a parts job, and it’s one of the fastest fixes we do. Left alone, repeated over-travel shortens the life of the motor.
  • Frozen or seized hinge and roller load. A Ghost Controls motor is rated to a certain gate weight, and a rusted hinge or dry roller adds drag that makes the operator strain every cycle. Owners often blame the motor when the real problem is the gate’s own hardware. We free the pivot points, check alignment, and confirm the gate swings or slides freely before we touch the operator – otherwise a new motor just fails the same way.
  • Safety-edge and photo-eye faults. A gate that reverses for no reason, or refuses to close, is usually a safety device doing its job or a misaligned beam in the desert sun. We realign eyes, test reverse response, and replace worn edges so the gate closes reliably without ever compromising the safety function.

Two things worth knowing that you won’t find on Ghost Controls’s own pages: their boards and receivers are proprietary, so a “universal” remote or a cheap aftermarket board from an online seller is the leading cause of repeat failures we’re called back to undo – we fit the correct OEM or a board we can stand behind. And because much of the Ghost Controls line is sold direct to homeowners, we regularly service units that were installed by the owner or a handyman, which means we check the mounting, the wiring, and the gate’s balance as carefully as the electronics. As an independent Ghost Controls service provider, we’re not affiliated with or authorized by the manufacturer, but we know the line.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Ghost Controls Gate Motor & Opener Process

Every Ghost Controls job in Summerlin follows the same steps, so you know what happens from the first call to the final walk-through.

  1. 1
    We answer the phone. A live person takes your call, 24 hours a day, 7 days a week – no voicemail, no callback queue. We ask about the gate, the series, and the symptom, and we tell you what we think is going on.
  2. 2
    We diagnose on site. Our background-checked, uniformed technician tests the operator, the board, the battery and charge system, the limits, and the gate’s own hardware – the whole system, not just the motor.
  3. 3
    We settle the price before we start. You get an upfront price in writing, and we confirm it with you before a single bolt is turned. Most jobs are completed in a single visit.
  4. 4
    We make the parts decision with you. Where a part has failed, we explain the OEM-versus-aftermarket trade-off plainly and recommend what will actually last, without upselling you past the problem.
  5. 5
    We repair and test. The fix goes in, then we cycle the gate repeatedly, test the safety reverse and limits, and confirm everything works before we call it done.
  6. 6
    We clean up and back it in writing. We leave your property as we found it, and the job is covered by our 90-Day Done Right Promise – if it isn’t right, we come back and make it right.

What Ghost Controls Gate Motor & Opener Costs in Summerlin

Here’s the honest price picture, so you can plan before you call. Your free estimate confirms the exact number, and the price is agreed before any work starts.

Common Ghost Controls job Typical range
Diagnostic and minor adjustment (limits, safety eyes, board reseat) $95 – $185
Battery or solar-charge system service $150 – $320
Control-board replacement (OEM) $220 – $420
Motor or operator repair $250 – $550
Full motor installation (new operator, hardware, calibration) $650 – $1,400
Intercom or access-control integration $300 – $750

What moves the price: whether the operator is a swing or slide unit, the gate’s weight and condition, solar versus wired power, and whether we’re repairing or replacing. A seized hinge that turns a motor swap into a hardware repair is the most common surprise – and the reason we check the gate itself first. Call (866) 623-9848 for a free estimate.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for Ghost Controls Work

We’re the dedicated gate specialist Summerlin homeowners call when they want it done once and never thought about again. Every job is covered by our written 90-Day Done Right Promise – if it isn’t right, we come back and make it right, no paperwork, no arguing. A live person answers the phone any hour, any day. Our technicians have up to 13 years of experience and are trained across nine gate-automation brands, so if your driveway turns out to have a LiftMaster, a Mighty Mule, or a DoorKing instead of a Ghost Controls unit, we’re still the right call. Our technicians are background-checked and uniformed, and they work in your home the way they’d work in their own mother’s. We quote upfront, we stand behind it, and we’ll be there when we say.

FAQs

Get Your Ghost Controls Gate Working Again

If your Ghost Controls gate motor or opener in Summerlin is slowing down, beeping, or refusing to cycle, call (866) 623-9848 for a free estimate. A live person answers any hour, any day, and we’ll give you an upfront price before any work starts – done right, and backed in writing. Ask about our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.

Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch