Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Parts & Welding in Summerlin: What to Know First
We provide independent Ghost Controls gate parts and welding in Summerlin, and most repair jobs are finished on the first visit. Springs, hinges, latches, rollers and post repairs are common, and the exact price is settled before a single bolt is turned. As an independent Ghost Controls service provider, we are not affiliated with or authorized by the manufacturer – we simply know their equipment well.

This page is for the Summerlin homeowner with a Ghost Controls opener on the driveway who needs the gate itself fixed, not just the motor reset. Whether it’s a sagging post in The Ridges or a snapped hinge in Red Rock Country Club, call (866) 623-9848 and a live person answers, day or night.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls makes a strong DIY-friendly line, and that’s exactly where the failures show up. The motor keeps working long after the gate structure has started to give. Here’s what we see most in Summerlin:
- Titan series arms fighting a sagging gate. The Titan12 and Titan24 will keep shoving a heavy gate open even after a post has settled and the frame has dropped, which eats the arm and the hinge pins together. We level the post and re-hang the gate first, then test the arm – the opener usually wasn’t the problem.
- Hinge pin wear on dual-swing setups. Ghost Controls dual-gate systems (the AXO and similar) put real load on the outer hinges. In Summerlin we routinely see the lower hinge pin wallowed out within a few seasons on 12-foot spans. We weld on new hinge leaves rather than patch the old hole.
- Latch and lock misalignment. When the gate drifts an eighth of an inch, the Ghost Controls auto-close latch stops catching cleanly and the arm slams to finish the cycle. We realign the strike and weld the latch plate back square so the arm stops fighting it.
- Rail and frame cracks at weld points. Factory welds on lighter residential rail crack where the gate meets the post bracket. A crack lets the whole frame flex, which the opener reads as a jam. We grind out the crack and re-weld it properly.
- Roller and track drag on cantilever gates. Worn rollers make the gate drag, and the Ghost Controls unit ramps up current trying to push through it. New sealed rollers and a track check fix the drag before it burns out the board.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Parts & Welding Process
- 1
The call. A live person answers and asks what the gate is doing – dragging, slamming, sagging, or not latching. We book a time and we show up when we say.
- 2
Diagnose the whole gate, not just the symptom. We check the posts, hinges, frame, rollers and latch, then test the Ghost Controls arm against a gate that swings freely. That’s how we separate a structure problem from a motor problem.
- 3
Parts decision. We use OEM Ghost Controls parts where they matter – brackets, arms, control boards – and quality aftermarket steel for hinges, rollers and latches where it’s stronger and lasts longer. We tell you which is which and why before we order anything.
- 4
The repair. Welding, post work, hinge replacement and realignment, done on site. Most jobs finish in a single visit.
- 5
Test and cycle. We run the gate through full open and close cycles, check the safety reverse and confirm the arm isn’t straining. You watch it work before we leave.
- 6
The guarantee. Every job is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Parts & Welding Costs in Summerlin
Prices below are typical Summerlin ranges. Your exact quote is settled upfront, before work starts, so the bill matches what we told you.
| Job | Typical range |
|---|---|
| Hinge replacement (per hinge, welded) | $150 – $320 |
| Post replacement or re-set | $350 – $850 |
| Rail or frame repair / custom welding | $200 – $600 |
| Roller replacement (set) | $120 – $260 |
| Latch and lock realignment | $140 – $300 |
What moves the price: gate weight and span, whether the post needs concrete work, and how much welding is involved. Steel prices and Summerlin’s heat-driven metal movement both play a part. Estimates are free – call (866) 623-9848 for yours.
Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for Ghost Controls Work
We’ve been doing this work locally for over 42 years, founded in 1984, and we plan to be here another forty. Our technicians have up to 13 years of experience and are trained on nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule – so if your system turns out to be a mixed setup, we’re not stumped. Every job carries the written 90-Day Done Right Promise, and every technician is background-checked and uniformed. A live person answers the phone 24 hours a day, and our current offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount.
FAQs
No, as long as the work is done correctly and we use OEM parts where the manufacturer requires them. On bracket, arm and board work we use OEM Ghost Controls parts to keep your coverage intact, and we’ll tell you when a quality aftermarket part is the better call. Call (866) 623-9848 for a free estimate.
Yes. We source OEM Ghost Controls parts for the components that matter and stock-quality steel for hinges, rollers and latches. Most jobs don’t wait on a special order. Call us for a free estimate and we’ll confirm parts availability.
Repair is almost always the right answer when the posts and frame are sound. A new hinge, a re-weld and a realignment usually cost a fraction of a new gate. We’ll tell you honestly if the structure has gone too far. Call (866) 623-9848 for a free second opinion on any written estimate.
Most repair jobs are done the same day or the next, and we answer the phone 24 hours a day for emergencies. We’ll give you a real window when you call, and we show up when we say. Call (866) 623-9848.
We weld on site in most cases. Hinge leaves, latch plates and frame cracks are all repairable in place, which keeps your gate hung and your downtime short. A free estimate tells you exactly what’s involved.
When your Ghost Controls gate needs parts and welding done right, call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. A live person answers, the price is settled upfront, and the work is backed in writing for 90 days.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.