LiftMaster operators
Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLiftMaster Gate Parts & Welding in Summerlin: What to Know First
We provide independent LiftMaster gate parts and welding in Summerlin, and most swing and slide gate jobs are finished in a single visit. Common repairs – hinges, rollers, latches, post and rail work, custom welding – typically run $180 to $650 depending on the part and the weld, and the price is settled with you before we start. We’re an independent LiftMaster service provider, not affiliated with or authorized by the manufacturer. If you own a LiftMaster operator and the gate has started to sag, drag, or grind, call (866) 623-9848 and a live person will pick up.

This page is for Summerlin homeowners with a LiftMaster gate system who need the metal side of the job done right, not just a motor reset.
Key Takeaways
- Most LiftMaster gate part and welding jobs in Summerlin are completed in a single visit.
- We stock and source OEM and quality aftermarket parts, and we tell you which we’re using and why.
- The price is quoted and agreed before a single bolt is turned.
- Every job carries our written 90-Day Done Right Promise.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
How LiftMaster Products Fail – and How We Fix Them
LiftMaster builds solid operators, but the gates they drive take a beating in Summerlin. Here are the failure modes we see most, and how we handle them.
- Sagging swing gates on LA400 and LA500 arms. The operator is usually fine – the gate leaf has dropped because the hinges wore or the post settled. We re-weld or replace the hinge, true the leaf, then re-check arm geometry so the operator isn’t fighting a crooked gate. Owners often blame the motor when the metal is the real problem.
- Rail and roller wear on slide gates driven by SL3000 and CSL24U. The v-track and rollers take grit from desert wind and monsoon dust, and the gate starts to bind. We replace rollers, straighten or re-weld the bottom rail, and set the track so the gate rolls clean.
- Cracked welds at hinge and post plates. Heat, ground movement, and years of cycling stress the welds where the hinge meets the post. A hairline crack becomes a dropped gate if it’s ignored. We cut out the failed weld, prep the steel, and re-weld it properly rather than patching over it.
- Latch and lock misalignment. When a post shifts or a gate sags, the latch no longer catches cleanly. We re-set the post or adjust the gate, then align the latch and lock so it engages the way it should.
- Post rot and footing failure. A leaning post throws off the whole gate – operator, latch, and swing. We reset or replace the post and re-anchor the footing so everything lines up again.
Our LiftMaster Gate Parts & Welding Process
- 1
We answer the phone. A live person takes your call 24 hours a day, 7 days a week, and we ask the right questions up front so we arrive prepared.
- 2
We diagnose on site. We check the operator, the gate leaf, the hinges, the track, and the welds together. What looks like a motor problem is often a metal problem, and we find the real cause.
- 3
We decide on parts. OEM or quality aftermarket – we tell you which we recommend, why, and what it costs, warranty-safe for your LiftMaster system.
- 4
We do the repair. Welding, hinge and roller replacement, post work, latch and lock alignment – done right the first time.
- 5
We test it. We cycle the gate, check the safety edges, and confirm the operator and the metal work together before we leave.
- 6
We back it in writing. Every job carries our 90-Day Done Right Promise. If it isn’t right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat LiftMaster Gate Parts & Welding Costs in Summerlin
Here’s what Summerlin homeowners typically see for common LiftMaster gate part and welding jobs. The price is quoted and agreed before any work starts, so there are no surprises on the bill.
| Job | Typical Range |
|---|---|
| Hinge replacement | $180 – $320 |
| Gate rollers (set) | $200 – $380 |
| Latch & lock alignment | $150 – $280 |
| Rail repair / re-weld | $280 – $550 |
| Post replacement & reset | $400 – $900 |
| Custom welding | $250 – $700 |
What moves the price: gate size and weight, whether the gate needs to come off its hinges, footing condition, and OEM versus aftermarket parts. Estimates are free – call (866) 623-9848 for an exact quote.
Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for LiftMaster Work
Our technicians have up to 13 years of experience, and they’re trained on nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so the correct fix is made on the first visit whatever is on the driveway. They’re background-checked and uniformed, and they work in your home the way they’d work in their own mother’s. Every job is backed by our written 90-Day Done Right Promise – no paperwork, no arguing. We answer the phone live, 24 hours a day, 7 days a week. And when your LiftMaster needs service and you’d rather have a second look than a fast sell, we offer a free second opinion on any written estimate.
If you have a Mighty Mule, Ghost Controls, or DoorKing system, we service those too.
Frequently Asked Questions
No – not when it’s done correctly. We use OEM or quality aftermarket parts and follow warranty-safe practices, so your LiftMaster coverage stays intact. We’ll tell you up front if a repair could affect your warranty. Call (866) 623-9848 for a free estimate.
Yes. We source OEM and quality aftermarket parts for the LiftMaster swing and slide operators we see in Summerlin, and most common parts are available quickly. Call (866) 623-9848 with your model and we’ll confirm availability.
Repair is usually the right call when the operator is sound and the failure is metal – hinges, welds, rollers, or a post. Replacement makes sense when the gate structure is failing in several places at once. We’ll give you a straight answer, not an upsell. Call (866) 623-9848 to talk it through.
Many LiftMaster repair and welding jobs in Summerlin are completed in a single visit, and we answer the phone live 24 hours a day, 7 days a week. Call (866) 623-9848 and we’ll get you on the schedule.
Yes. We’re trained on nine gate-automation brands, including Mighty Mule, Ghost Controls, and DoorKing, so we can help whatever is on your driveway. Call (866) 623-9848 for a free estimate.
Get Your LiftMaster Gate Fixed Right
If your LiftMaster gate is sagging, binding, or needs new hinges, rollers, or a proper weld, call (866) 623-9848 for a free estimate. We’re Ironworks Gate Co. Summerlin, we answer the phone live, and we back every job in writing. Ask us about our $50 Off Any Repair Over $250 offer and our permanent 5% Senior and Veteran discount.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.