A Ironworks company - serving Summerlin, NV

Linear Gate Installation in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Linear Gate Installation in Summerlin: What to Know First

We install Linear gate operators for Summerlin homeowners who want the job measured, quoted, and finished without guesswork. A typical Linear driveway gate installation runs $3,200 to $6,800 depending on gate weight, travel length, and whether the low-voltage power run is already in place, and most jobs are scheduled within one to two weeks of the free measure. The price is written down and agreed before we touch the gate, and it doesn’t change at the end.

professional gate installation service in Summerlin, NV

Call (866) 623-9848

This page is for the owner who already has Linear on the property, or who is replacing a worn-out Linear unit and wants the same dependable platform back on the driveway. If that’s you, call us at (866) 623-9848. A live person answers, day or night. We’re an independent Linear service provider, not affiliated with or authorized by the manufacturer, and we work on the equipment the same way we always have: carefully, and backed in writing.

How Linear Products Fail – and How We Fix Them

Linear builds solid residential and light-commercial operators. When one goes bad, it almost always fails in a handful of predictable places. Here’s what we run into on Summerlin driveways, and what we do about it.

  • Faded limit switches on swing and slide operators. On Linear slide and swing units, the limit cams drift over time, and the gate starts stopping short or over-traveling into the stop post. Owners often blame the motor. Usually it’s a worn limit assembly or a loose cam. We reset the limits to the actual travel and replace the switch hardware if it’s pitted. That’s a same-visit fix, not a rebuild.
  • Control-board moisture and heat damage. Linear boards sit in the housing and take the desert for years. In Summerlin we see hairline cracks at the terminal blocks from heat cycling and dust that bridges the low-voltage connections. The symptom is a gate that runs, pauses mid-travel, then reverses. We test the board under load, clean the terminals, and replace the board only when the fault traces there.
  • Safety-edge and photo-eye faults that read as motor problems. When the reversing edge or the photo-eye pair loses its connection, the operator won’t close, and it looks like a dead motor. We meter the edge and the eyes first. On Linear units, the edge wiring routing inside the housing is a common chafe point, and re-routing the run fixes more gates than swapping parts does.
  • Battery-backup and solar-charge failures. On Linear units running on battery or solar assist, the batteries age out and the gate slows or stops on the last few feet of travel. These are often the ones you find out about on a Friday night. We test battery capacity under load and replace the cells, not the whole operator.
  • Sagging gates that wear out a healthy operator. A gate that has dropped on its hinges drags the operator through every cycle. Linear motors catch the blame, but a hinge is the culprit. We check the gate’s hang first. If the gate is out of square, we weld and true it before we install anything new, or the replacement operator will wear the same way.

On the parts side: we use Linear OEM components where the warranty and the board design depend on it, and quality aftermarket parts where an OEM piece is a rebranded commodity. We’ll tell you which is which on your job, because you should know what you’re paying for.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Linear Gate Installation Process

  1. 1
    The call. A live person answers, any hour. We ask what the gate is doing, whether it’s Linear or something else, and when it was last serviced. No phone tree.
  2. 2
    The free measure. We come out, measure travel, check gate weight and hinge condition, and look at where the low-voltage power run will land. Installation work is scheduled, not dispatched same-day, because it’s measured and ordered.
  3. 3
    The written price. You get the full breakdown before any work starts: operator, mounting, wiring, safety edges, keypad, labor. No surprises on the bill.
  4. 4
    The install. The operator goes on the gate, the power and control runs are pulled, and the safety edges and photo-eyes are set. The gate is tested at every point in its travel with the safety devices live.
  5. 5
    The handoff. We walk you through the operator, the remote, and the keypad codes, then clean up the site.
  6. 6
    The guarantee. Every job is protected by the 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.

What Linear Gate Installation Costs in Summerlin

Prices vary by gate size, travel, and how far the power has to run. Here are the ranges we see for Linear work in Summerlin:

Job Typical Price
Linear slide operator, driveway gate (single) $2,600 – $4,400
Linear swing operator, single or double gate $3,200 – $6,800
Linear pedestrian gate operator $1,800 – $3,200
New low-voltage power run and control wiring $400 – $1,200
Safety edge and photo-eye package $350 – $700
Keypad or access-control add-on $300 – $850

What moves the price: gate weight and length of travel, whether the gate needs welding and truing first, and how far the power has to be pulled to reach the operator. Every price is quoted and agreed before work starts. Call (866) 623-9848 for a free measure and a written estimate. The estimate is free, and we’ll tell you honestly if your existing Linear unit can be saved instead of replaced.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for Linear Work

We’ve been doing gate work in Summerlin long enough that the sight of a Linear housing on a driveway tells us what we’re likely to find inside. Our technicians have up to 13 years of experience, and they’re background-checked and uniformed, working on your property the way they’d work on their mother’s. We’re trained and equipped on nine gate-automation brands, LiftMaster, Mighty Mule, Ghost Controls, and DoorKing among them, so if your Linear unit turns out to be the wrong platform for your gate, we’ll say so and quote the right one instead of forcing it. A live person answers the phone around the clock. And every job carries the 90-Day Done Right Promise in writing. When we do a Linear install in Summerlin, we’ll be there when we say.

FAQs

Will installing a new Linear operator void my gate’s warranty? On the gate itself, no, a properly installed and warranted operator doesn’t affect the gate’s structural warranty. On the operator, Linear’s coverage depends on a licensed, correct installation, which is exactly how we work. We’ll tell you what’s covered and what isn’t before we start.

Can you get Linear parts, or will you use aftermarket? We use Linear OEM parts where the board, warranty, or safety function depends on them, and quality aftermarket parts only where an OEM piece is a commodity. You’ll see the choice on the written estimate, and the price is agreed before we open a box.

Should I repair my Linear operator or replace it? If the board, limit assembly, or safety-edge wiring is the fault, repair is usually the better value, and we can often do it in one visit. If the motor housing is cracked from heat or the unit is more than 15 years old with multiple failing systems, replacement is the honest call. We’ll give you both numbers and let you decide.

How fast can you get to a Linear job in Summerlin? Installation is measured and scheduled, typically within one to two weeks of the free measure. Repair and emergency calls are handled as quickly as we can get someone out, and a live person answers the phone at any hour. Call (866) 623-9848 and we’ll give you a real timeline, not a maybe.

Do you charge for the estimate? No. Estimates are free, including a free second opinion on any written estimate you’ve already received. Call (866) 623-9848 and we’ll get you scheduled.

Talk to Us

If you’ve got a Linear operator on your driveway, or you’re ready to put one there, we’d like to hear from you. Call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. We’ll measure the gate, tell you what it actually needs, and put the price in writing before anything gets bolted down. Done right, and backed in writing.

Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch