A Ironworks company - serving Summerlin, NV

Linear Gate Repair in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Linear Gate Repair in Summerlin: What to Know First

We provide independent Linear gate repair in Summerlin, and most Linear jobs we see here are diagnosed and fixed in a single visit. A failed control board or a slipping gearbox is usually a straightforward repair, and you get the price in writing before any work starts. As an independent Linear service provider, we’re not affiliated with or authorized by Linear, but we’re trained and equipped on their equipment and know where it fails.

professional gate repair service in Summerlin, NV

Call (866) 623-9848

This page is for Summerlin homeowners with a Linear system on the driveway: Linear Pro Access swing and slide operators, the LP series residential units, and older Linear-built arms that came with the house. Call (866) 623-9848 and a live person picks up, day or night, and we’ll talk through what your gate is doing.

Key Takeaways

  • Most Linear repairs are completed in one visit, with the price agreed before we start.
  • Linear’s weak spots are the control board, the battery-backed logic, and hinge and post movement that throws off the arm geometry.
  • We use OEM Linear parts where they matter and quality aftermarket parts where they don’t, and we tell you which is which.
  • Every Linear repair is covered by our written 90-Day Done Right Promise.

How Linear Products Fail – and How We Fix Them

Linear builds solid residential operators, and a big share of the Linear gates in Summerlin are fifteen to twenty-five years old and still running. What fails is predictable once you’ve worked on enough of them.

  • Control board and battery-backup failures on Linear Pro Access units. The logic board on these operators is the most common failure we find. Summerlin’s summer heat, with attic-level temperatures in a metal control box, cooks the board’s electrolytic capacitors and the battery-backup circuit over time. You’ll see the gate stop mid-travel, run in one direction only, or start and stop on its own. We test the board under load before condemning it and replace the board with the correct Linear part rather than swapping in a generic controller that won’t talk to the rest of the system.
  • Arm and gearbox wear on Linear swing operators. The worm gear and the arm on an aging Linear swing unit wears and the gate starts to lag, stall, or reverse at the last few inches of travel. Grease has often dried out and been packed with grit. We rebuild or replace the arm and gearbox to spec instead of forcing a worn arm to work by turning up the force setting, which is how boards and hinges get destroyed.
  • Slipping drive chain and rail on Linear slide operators. Slide gates on a Linear operator throw the chain when the rail is out of level or a roller has worn flat. The operator gets blamed and the gate is the problem. We check the rail, rollers, and chain tension first, then set the limit switches properly so the operator isn’t fighting the gate every cycle.
  • Hinge and post repair that throws off arm geometry. When a hinge sags or a post moves, the Linear arm no longer sits at the right angle through its arc and the operator strains or the gate won’t fully open. Summerlin’s freeze-thaw swings and clay-heavy soil shifting a gate post is a real cause here, and it’s the one most often missed. We reset or rebuild the hinge and post before touching the operator.
  • Weather-seal and keypad failures on Linear access hardware. Linear keypads and photo-eye sets take sun and dust, and the rubber seals harden and crack. Once water gets in, the keypad reads wrong codes or the safety beam faults and the gate refuses to close. We replace the sealed components and check the safety edges and photo-eyes as part of the same visit, because a Linear operator that won’t close is almost always an access-control fault, not a motor fault.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Linear Gate Repair Process

Every Linear job runs the same way, from the first call to the cleanup.

  1. 1
    The call. A live person answers and asks what the gate is doing and what Linear model is on the post. We book a window and tell you when we’ll be there.
  2. 2
    On-site diagnostics. Our technician tests the operator under load, checks the control board, battery backup, limits, and force settings, then inspects the gate itself: hinges, post, arm, rail, rollers, and chain. We find what’s actually wrong before we quote.
  3. 3
    The parts decision. We tell you plainly whether the fix needs an OEM Linear part or a quality aftermarket part, and why. You get the upfront price in writing and approve it before a single bolt is turned.
  4. 4
    The repair. We do the work to spec: board, arm, gearbox, hinges, post, seals, or safety edges, whichever the diagnosis calls for.
  5. 5
    The test. We cycle the gate through open, close, reverse, and obstruction tests, check the safety edges and photo-eyes, and run it several times before we call it done.
  6. 6
    The guarantee and cleanup. You get the written 90-Day Done Right Promise, we walk you through what we did, and we leave the driveway as we found it.

What Linear Gate Repair Costs in Summerlin

These are the ranges we see on Linear work in Summerlin. Your exact price is quoted and agreed before any work starts, and there are no surprises on the bill.

Linear repair Typical range
Diagnostic and service call $89
Control board or logic fault repair $250 – $520
Battery backup / logic replacement $180 – $320
Arm, gearbox, or drive-chain repair (swing or slide) $240 – $600
Hinge, post, and gate realignment $180 – $450
Keypad, photo-eye, or safety-edge replacement $150 – $380
Weld and rust repair on the gate $200 – $500

What moves the price: whether the fix needs an OEM Linear part, the age of the operator, how far out of alignment the gate has drifted, and whether we’re correcting damage a previous repair made with force settings turned up too high. Free second opinion on any written estimate, $50 off any repair over $250, and a 5% Senior and Veteran discount that’s always available. Call (866) 623-9848 for an exact quote, and estimates are free.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for Linear Work

Our technicians have up to 13 years of experience, and they’ve worked Linear systems long enough to know a board failure from an arm failure from a hinge that’s quietly throwing everything off. We carry a live person on the phone 24 hours a day, 7 days a week, so you won’t be waiting until Monday after a gate sticks open on a Saturday. And if the gate on your driveway ever turns out to be a LiftMaster, Mighty Mule, Ghost Controls, or DoorKing unit instead, we’re trained and equipped on those too, along with FAAC, BFT, Viking, and Elite.

Every completed Linear job is protected by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no arguing and no paperwork. We give a square deal, an upfront price, and we’ll be there when we say.

FAQs

Is my Linear gate repair covered by a warranty? Yes. Every Linear repair we complete is protected by our written 90-Day Done Right Promise. If the problem returns within that window, we come back and make it right at no extra cost. Call (866) 623-9848 with any questions about the guarantee.

Can you get Linear parts for an older operator? Often, yes. Many Linear Pro Access and LP series parts are still available, and where an OEM part is discontinued we source a quality aftermarket equivalent and tell you exactly what we’re using and why. We never install an OEM part where it doesn’t matter or a cheap substitute where it does.

Should I repair or replace my Linear operator? Repair is usually the right call when the operator is under about fifteen years old and the motor and gearbox are sound. We replace when the control board and the mechanicals are both failing and the parts cost outweighs a new unit. We’ll give you both numbers and let you decide.

Can you come out today for a Linear gate that won’t close? Most Linear repairs are done in a single visit, and we do handle emergency calls. Call (866) 623-9848 and a live person will pick up and tell you the soonest we can be there.

Do you work on Linear slide gates as well as swing gates? Yes. We service both Linear swing and slide operators, and we repair the gate itself, including rail, roller, hinge, and post work, so the operator isn’t fighting a gate that’s out of line. Call (866) 623-9848 to describe what your gate is doing.

Get Your Linear Gate Fixed Right

If a Linear gate in Summerlin has stopped opening, won’t close, or is running rough, call (866) 623-9848 for a free estimate. A live person answers around the clock, we’ll give you an upfront price before any work starts, and every job is backed in writing by the 90-Day Done Right Promise. Done right, and backed in writing.

Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch