Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Access Control in Summerlin: What to Know First
We provide independent Mighty Mule gate access control in Summerlin, and most systems we see (keypads, remotes, phone entry, card readers, intercoms) are diagnosed within a single visit. Common entry and control faults get fixed the same day; anything that needs a control board or a specialty part is scheduled once the part is in hand, and you get a written price settled before we start. This page is for Summerlin homeowners whose Mighty Mule gate, keypad, remote or phone entry has gone flaky, locked someone out, or stopped answering altogether. Call (866) 623-9848 and a live person will pick up, day or night.

Key takeaways
- We’re an independent Mighty Mule service provider, not affiliated with or authorized by the manufacturer.
- We service the full Mighty Mule line, alongside LiftMaster, Ghost Controls and DoorKing.
- Upfront price before any work, and a written 90-Day Done Right Promise on every job.
How Mighty Mule Products Fail – and How We Fix Them
Mighty Mule controllers are built for the do-it-yourselfer, which means the weak points are predictable and repeatable. On Summerlin gates, these are the five we run into most.
- The Mighty Mule FM-series control boards and the sun. The FM350, FM500 and FM600 boards sit inside a housing that takes direct afternoon sun on many Summerlin driveways, and the black plastic case can bake the board over a few summers. The symptom is a gate that stops mid-travel or forgets its limits. We test the board under load, replace it with the correct board for that series, and re-learn the open/close limits so the gate strokes cleanly again.
- Battery-first accessories with failing batteries. Mighty Mule accessories like keypads and standalone receivers often run on their own batteries, and a keypad whose battery has gone soft will accept a code and then never trip the operator. Owners replace the keypad before checking the battery. We test the keypad’s output at the receiver first, so we only replace what’s actually failed.
- Wireless keypad range and interference. The Mighty Mule wireless keypads and plug-in receivers pair over the shared wireless band, and in Summerlin’s dense, stucco-and-block walls you get range that drops out in the heat. We move receivers, re-pair, and where it makes sense, wire a keypad directly instead of fighting the wireless link.
- Remote and receiver mismatch after a board swap. The most common post-repair complaint: “My remote worked before, and now it doesn’t.” When a board gets replaced, the old remotes and any paired keypad or vehicle transmitter have to be re-paired to the new receiver. We re-pair every remote and accessory on the gate before we leave.
- Limit switches and gate posts that have shifted. Mighty Mule operators learn their open and close positions from limit switches, and in Summerlin’s expansive desert soils, posts move a little, especially after a hot summer. The gate hits the switch early or runs past it, and the operator gives up mid-stroke. We re-set the limits and check the post for movement before we blame the board.
If you’ve been told your Mighty Mule “just needs a new board,” get a second opinion. We offer a free second opinion on any written estimate for exactly this reason.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Mighty Mule Gate Access Control Process
- 1
Call and describe the symptom. A live person answers 24/7 and asks the right questions: which keypad, which remotes, when it started, and whether the gate moves at all.
- 2
Diagnose on site. We test the operator, the control board, the receiver, the keypad and the wiring, and we confirm what failed before anyone quotes a part.
- 3
Parts decision. If the part is a Mighty Mule OEM item, we use it where it’s the right call. If a quality aftermarket part does the same job for less, we’ll say so and explain the trade-off, including how it affects any remaining warranty.
- 4
Repair and re-learn. We fit the correct part, re-learn the limits, re-pair every remote and accessory, and run the gate open and closed several times with the homeowner watching.
- 5
Test the whole system. Keypad code, remote, phone entry and any intercom get tested together, not one at a time.
- 6
Written guarantee. Every job is backed by our 90-Day Done Right Promise, in writing, with no paperwork and no arguing. If it’s not right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Mighty Mule Gate Access Control Costs in Summerlin
Here’s what Mighty Mule access-control work typically runs in Summerlin. These are real ranges for common jobs; the price is quoted and agreed with you before any work starts.
| Job | Typical range |
|---|---|
| Keypad replacement or re-pair | $175 – $325 installed |
| Remote and receiver re-pair / new remotes | $95 – $220 |
| Control board replacement (FM-series) | $320 – $520 |
| Phone entry / intercom installation | $450 – $900 |
| Card reader or smart-access upgrade | $550 – $1,150 |
Price moves most on control boards and on access hardware that needs new wiring run to the gate. Standing offers you can use: $50 off any repair over $250, and a permanent 5% senior and veteran discount. Call (866) 623-9848 for a free estimate, and the price is settled before we start.

Why Summerlin Homeowners Call Ironworks Gate Co. Summerlin for Mighty Mule Work
We’re trained on nine major gate-automation brands, so on a Mighty Mule job we come prepared with the right parts and the right answer. If your Mighty Mule is beyond saving, we can talk straight about a LiftMaster, Ghost Controls or DoorKing replacement instead, and we’ll tell you the difference. Our technicians have up to 13 years of experience, and every call reaches a live person 24/7. Every job is backed in writing by our 90-Day Done Right Promise: done right, and backed in writing. No surprises on the bill. Call (866) 623-9848.
FAQs
Is my Mighty Mule still under warranty, and does replacing the board void it? That depends on the model and how old it is; ask the manufacturer or check your paperwork. What we do is use OEM parts where the warranty depends on it, and if an aftermarket part is the better value, we’ll tell you the trade-off before we start. Call (866) 623-9848 for an exact quote; estimates are free.
Do you carry Mighty Mule parts? We can get genuine Mighty Mule parts for the common series, and for some jobs a quality aftermarket part is the smarter call. Because we service nine major brands, we also keep a backup path to a compatible part when a specific Mighty Mule part is back-ordered. Call (866) 623-9848 for an exact quote.
Can you fix my keypad or remote the same day? In many cases, yes. Keypad and remote re-pairs are often handled in a single visit; board replacements that need a specific part are scheduled once it’s in hand. Call (866) 623-9848 and a live person will give you an honest timeline.
Should I repair my Mighty Mule or replace it? If the operator, board and gate are sound, repair is usually the cheaper and right call. If the board has failed twice in a few summers, or the operator is well past its service life, a full replacement can cost less over the next few years. We’ll give you both numbers, free, and let you decide.
Do you handle the power run and the safety edges for a new Mighty Mule? Yes. For a new keypad, intercom, card reader or operator, we handle the power run and the safety edges as part of the job, and we measure and quote it as a scheduled project rather than a same-day call. Call (866) 623-9848 for a free measure and a written price.
Got a Mighty Mule gate in Summerlin that’s stopped answering the keypad, the remote or the phone? Call Ironworks Gate Co. Summerlin at (866) 623-9848. A live person answers 24/7, estimates are free, and every job is backed by our written 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.