A Ironworks company - serving Summerlin, NV

Mighty Mule Welding & Fabrication in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Welding & Fabrication: The Summerlin Owner’s Guide

We repair and fabricate Mighty Mule gate hardware in Summerlin, including cracked hinge brackets, worn pivot tubes, and fatigued arms on swing and slide operators. Most welding and fabrication jobs on a Mighty Mule gate run $220 to $540 installed, depending on whether we’re rebuilding an existing bracket or fabricating a replacement, and we can usually get to a gate that won’t close or has dropped on its hinges the same day you call. You’ll know it’s time when the gate sags at the latch, drags the ground at the strike post, or the operator arm starts binding halfway through its travel and stops.

Professional welder using an angle grinder for metal gate repair services in Summerlin, NV

Call (866) 623-9848

Which Mighty Mule Models This Applies To

Mighty Mule builds its reputation on the DIY-friendly MM series: the MM260, MM360, MM560, and the older MM500 and MM600 lines, all sold through farm and ranch retailers and big-box stores. The welding and fabrication needs differ by generation. The older MM500/MM600 brackets are heavier plate steel and often outlast the gate itself; the newer MM260/MM360 brackets are stamped thinner and are the ones we see crack first at the mounting bolt holes. To match the right replacement, photograph the operator arm where it bolts to the gate, note the model number on the control box label (usually inside the housing), and measure the gate tube diameter at the hinge point. That measurement matters more than the model number, because Mighty Mule has used three different gate-tube sizes across the series.

On the OEM-versus-aftermarket question: Mighty Mule’s own replacement brackets are the safe match, but a properly fabricated bracket in the same gauge steel will outlast the original if the welds are right. We’re an independent service provider and not affiliated with Mighty Mule, so we give you the honest comparison rather than steering you to a brand. We also service LiftMaster, Ghost Controls, and DoorKing hardware.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Mighty Mule Welding & Fabrication Is Failing

Here in Summerlin, gate hardware takes a beating from the sun and the dry air, and the fatigue shows up in predictable places.

  • The gate sags at the latch post. A cracked or bent hinge bracket has lost its square, and the gate tube is no longer riding true. You’ll see a gap at the top of the latch that wasn’t there last year.
  • The operator arm binds or stalls mid-travel. The mounting bracket has flexed, throwing the arm out of alignment so the motor is fighting the geometry instead of the gate weight.
  • Visible cracks at the bolt holes or weld seams. Look at the bracket where it attaches to the gate. Hairline cracks in stamped steel propagate fast, especially after a 110-degree Summerlin afternoon and a cool night.
  • The gate drops or drags on the ground. A worn pivot tube or a fatigued weld at the hinge post lets the gate drop a half-inch, and that’s enough to grind the strike plate.
  • Rattling or clunking when the gate moves. Loose or elongated bolt holes in a fatigued bracket, or a weld that’s cracked but hasn’t separated yet.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Every price we quote is settled before a single bolt is turned. Here’s what Summerlin homeowners typically see:

Job Installed Range
Repair existing hinge bracket (weld and reinforce) $220 – $320
Fabricate replacement mounting bracket $280 – $420
Rebuild gate frame at hinge point, operator arm included $380 – $540
Full gate re-square and weld-out $450 – $700

What drives the range: whether we’re repairing existing steel or fabricating from scratch, the gauge and finish required, and whether the operator needs to come off the gate to do the work right. Every job is covered by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no paperwork, no arguing. We quote parts and labor together, so there’s no surprise line on the invoice. Active standing offers: $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, and a permanent 5% Senior and Veteran discount.

Professional welder using an angle grinder for metal gate repair services in Summerlin, NV

DIY or Call Us?

Some checks are safe to do yourself. Walk the gate and look at the bracket where it meets the gate tube, wiggle the operator arm by hand with the power off, and note where it binds. If you can see a hairline crack or a bracket that’s visibly bent, that’s where we come in.

Welding on a live gate frame is where DIY goes wrong, and we say so plainly. You’re working next to a powered operator with stored tension in the arm, and a weld that isn’t structurally sound on a 200-pound gate is a genuine safety risk. A gate that drops while someone is walking through it can injure. That work belongs with a trained welder who can confirm the steel is sound and the geometry is true before anyone stands near it. If you’re unsure, call us at (866) 623-9848 and we’ll tell you straight.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch