A Ironworks company - serving Summerlin, NV

Weld & Rust Repair in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Weld & Rust Repair in Summerlin, NV

Weld and rust repair in Summerlin typically costs $150 to $600 depending on how much metal has to be cut out and replaced, and most jobs are finished in a single visit. It’s the work that keeps a gate standing straight and swinging true long after the hinge plates start to pit: rewelding cracked joints, rebuilding hinge mounts that have pulled loose from the post, and treating rust before it eats through a frame. Summerlin’s dry air slows rust down compared to the coast, but it doesn’t stop it. Our technicians have up to 13 years of experience with wrought iron, steel, and aluminum gates, and every repair is backed in writing by our 90-Day Done Right Promise. Call (866) 623-9848 and a live person will pick up, day or night.

This page covers the metalwork side of Gate Repair. If the problem is a dead motor, a keypad that won’t read, or a gate that stops halfway, the parent page walks through the automation side. Most homes in Summerlin need both eventually, and the two are handled by the same crew.

Key Takeaways

  • Weld and rust repair runs $150 to $600 in Summerlin, with full hinge-mount rebuilds at the top of that range.
  • Most weld jobs are completed in a single visit, with the price settled before any work starts.
  • Rust in Summerlin shows up first at the bottom rail and hinge plates, where irrigation overspray and morning condensation collect.
  • Ironworks Gate Co. works on LiftMaster, FAAC, Mighty Mule, and other systems, so the weld and the hardware get checked together.
  • Every job carries the 90-Day Done Right Promise: if it’s not right, we come back and make it right.

When You Need Weld & Rust Repair

Iron gates don’t fail all at once. They give you signs for months before something lets go, and the homeowners who call us early usually spend less than the ones who wait. Here’s what we see most often around Summerlin.

  • A gate that sags and drags on the ground. When the bottom hinge weld cracks, the gate drops a half inch or more and starts scraping the driveway. In The Ridges and Red Rock Country Club, where gates often run 12 feet wide, that sag puts serious strain on the post weld within weeks.
  • Rust bleeding through paint at the hinge plates. Summerlin’s irrigation systems throw water onto gate posts more than most homeowners realize. The plate is where water sits longest, and it’s almost always the first spot to pit.
  • Visible cracks at weld joints. A hairline crack in a hinge weld or a latch post weld travels fast once the gate is under daily load. Catching it at a quarter inch costs far less than catching it after the weld has torn out of the post.
  • Powder coating bubbling or flaking. Bubbles under the finish mean rust is already working underneath. This is common on gates that face the afternoon sun along the western edges of Summerlin, where thermal cycling is hardest on the coating.
  • A gate that’s been hit. A car nudging a gate in a narrow Summerlin driveway, or a windstorm slamming it into a wall, bends the frame and cracks the welds at the strike side. It usually looks worse than it is.
  • Rust at the bottom rail after monsoon season. The late-summer storms push water into the channel where the bottom rail meets the vertical bars. That joint holds moisture longer than any other part of the gate.

If any of that sounds familiar, it’s worth a look before the gate fails entirely. A small weld repair today is a much smaller bill than a hinge rebuild or a full gate replacement later.

Our Weld & Rust Repair Process

We keep the process simple and predictable, and we don’t start until you know the price.

  1. On-site inspection. We look at every weld joint, not just the one that’s obviously broken. Cracks travel, and a gate with one failed hinge weld usually has a second one starting. We check the post mounts, the frame, the latch, and the bottom rail, and we note any rust that’s gone past the surface.
  2. Upfront pricing, settled before we start. You get a clear price in writing before a single bolt is turned. No surprises on the bill. If the job turns up something we didn’t expect once we open up the metal, we stop and talk to you first.
  3. Grind out the old weld and prepare the metal. A weld laid over rust or old paint won’t hold. We cut back to clean steel, grind the joint to sound metal, and remove loose scale so the new weld fuses properly.
  4. Reweld or rebuild the joint. For a cracked weld, we rewelded the joint and reinforce it where needed. For a hinge mount that’s pulled out of the post, we rebuild the plate and weld it back solid. Aluminum gates get a different process than steel, and we match the method to the metal.
  5. Treat the rust and refinish. We neutralize the rust, prime the bare metal, and refinish to match the surrounding gate as closely as the finish allows. This is the step most shops skip, and it’s the one that keeps the rust from coming back next season.
  6. Test the swing and the hardware. The gate has to swing freely and latch cleanly under its own weight. If the gate runs on an opener, we check that the operator still travels correctly after the repair, whether it’s a LiftMaster or a FAAC unit. A weld that changes the gate’s weight or alignment can throw off the motor’s limits.

Most jobs are done in that single visit. When a hinge mount has to be rebuilt from scratch, we’ll tell you upfront if it’s a two-trip job so there are no surprises.

Weld & Rust Repair Pricing in Summerlin

Here’s what the work runs in Summerlin, drawn from real jobs across the valley. Every gate is different, so treat these as ranges, not quotes.

Job Typical Summerlin Range
Spot weld repair (single cracked joint) $150 – $250
Multiple weld repairs on one gate $250 – $400
Hinge plate rebuild or reattach $300 – $500
Rust treatment and refinish (per section) $100 – $250
Full hinge-mount rebuild with post repair $450 – $600

A few things move the price. The gauge of the metal matters: heavier wrought iron takes more time to grind and weld than a thin aluminum frame. Access matters too, since a gate tucked behind landscaping in The Trails or a tight side yard in Summerlin West takes longer to reach and work around. And the condition of the rust drives cost more than anything else. Surface rust is quick work; rust that’s eaten through a rail means cutting out and replacing steel.

We’ll give you a straight number on site, and the price we quote is the price you pay. If you’ve got a written estimate from another shop, our free second-opinion offer applies, and we’ll tell you honestly whether the scope is right. We also take $50 off any repair over $250, and there’s a standing 5% discount for seniors and veterans.

Why Summerlin Gates Rust the Way They Do

Summerlin sits at the edge of the Mojave, and the climate here does something specific to metal gates. The dry air is kind to steel most of the year, but the temperature swings between summer afternoons and cool desert nights cause the metal to expand and contract daily. That movement works at every weld joint and every place the finish has a small crack, and over the years it opens up hairline seams where water gets in.

Then there’s the irrigation. Lawns and drip lines along the front of a Summerlin home throw water onto gate posts and bottom rails, and the spots that stay damp are exactly the spots where rust starts. Homes on the west side of the valley, facing the open desert, also catch more wind-blown grit, which wears down the powder coating faster than most homeowners expect. We see rust on aluminum gates too, which surprises people. Aluminum doesn’t rust the way steel does, but it corrodes and pits, and the white chalky corrosion at hinge points is just as much a warning sign.

If your gate is automated, a rusting hinge or a loosened post can throw the operator out of alignment, which is harder on the motor over time. An older Mighty Mule or LiftMaster unit working against a gate that drags will burn through its gears faster than one on a gate that swings free. Keeping the metal sound is the cheapest maintenance you can do for the automation.

Repair or Replace? A Straight Answer

Most gates can be repaired, and repairing is usually the right call. A well-built iron gate has decades of life in it, and a weld or hinge failure is a fixable problem, not a reason to tear the gate out. We recommend replacement only when the frame itself has rusted through in multiple places and the metal is too thin to hold a new weld. Even then, we’ll tell you what’s repairable and what isn’t, in plain terms, so you can decide.

Gates that have been serviced regularly tend to last far longer, and the seasonal tune-up we offer is a good time to catch rust before it spreads. If your gate is automated and the opener is older, it’s worth having the motor checked while the metalwork is done, since we service nine major brands, including FAAC and BFT, and we’d rather find a worn gear early than have the operator quit on you after the weld is finished.

FAQs – Weld & Rust Repair

How much does weld and rust repair cost in Summerlin?

Weld and rust repair in Summerlin generally runs $150 to $600, with most single-joint weld repairs landing around $150 to $250 and full hinge-mount rebuilds at the higher end. The exact price depends on metal thickness, rust severity, and access. Call (866) 623-9848 for a free estimate, and we’ll give you a firm number on site.

Can you fix a rusted gate hinge without replacing the whole gate?

Yes. A rusted or cracked hinge plate can be cut out and rebuilt, and in most cases the gate itself stays. We rebuild the hinge mount, weld it back to solid metal, and treat the surrounding rust so it doesn’t spread. That’s the standard repair, and it’s a fraction of the cost of a new gate.

Do you repair aluminum gates or only iron and steel?

We repair both. Aluminum gates corrode differently than steel, and they need a different welding process and finish, but the repair principles are the same: cut back to clean metal, weld sound, and protect the surface. If your aluminum gate is pitting at the hinge points or showing white corrosion, it’s worth a look before the joint weakens.

How soon can you come out, and will the gate work the same day?

In most cases, yes. A live person answers the phone 24 hours a day, so you’ll reach us when you call, and most weld and hinge repairs are completed in a single visit. When a hinge mount needs a full rebuild, we’ll tell you upfront whether it’s a one-trip or two-trip job before we start.

Does weld repair affect my gate opener?

It can. A repair that changes the gate’s weight or alignment can throw off the operator’s travel limits, so we test the hardware and the opener after every weld, whether it’s a LiftMaster, FAAC, or another brand. If the operator needs an adjustment, we handle it. If you’d rather leave the automation side to a separate visit, our Gate Repair in Summerlin page covers that service. You can also start from our home page for the full range of gate work we handle.

If you’ve got a gate that sags, a hinge plate that’s pitted, or a weld that’s starting to crack, don’t wait for it to fail. Call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. We’ll come out, give you a straight price upfront, and back the work with our 90-Day Done Right Promise. A square deal, no surprises on the bill, and a live person on the line whenever you need us.

Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin.

Need Gate Repair help in Summerlin? Licensed & insured · 60-minute response · free estimates
Call (866) 623-9848
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Ironworks Gate Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch