A Ironworks company - serving Summerlin, NV
Gate Parts & Welding in Paradise, NV | Ironworks Gate Co. Summerlin

Gate Parts & Welding in Paradise - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Paradise

Ironworks Gate Co. Summerlin handles gate parts and welding for Paradise homeowners and property managers who are tired of gates that drag, sag, or jump the track. We work the tight lots here every week – the shared driveways, the slide gates boxed in between block pillars, the driveway lanes that have to stay passable while we work. Our technicians have up to 13 years of experience, and a live person answers the phone 24 hours a day at (866) 623-9848. Most jobs settle on the first visit, with the price agreed before a single bolt is turned.

Call (866) 623-9848

Why Ironworks Gate Co. Summerlin Is Paradise’s Preferred Gate Parts & Welding Company

Paradise isn’t one kind of place, and gate work here shows it. On the west side you have 1960s through 1980s tract homes – stucco on frame, slump-block walls, concrete driveways – where the original wrought-iron and tubular-steel gates are now on their second or third motor. On the east side you have the Strip corridor and airport-adjacent commercial property, where high-traffic gates have to keep working because access can’t stop. We handle both, and we know which one we’re walking into before we pull up.

Our Paradise customers call us because we show up when we say we will and we quote the job before we start it. Background-checked, uniformed technicians work in your yard the way they’d work in their own mother’s. Every completed job carries the 90-Day Done Right Promise in writing – if it isn’t right, we come back and make it right. No arguing, no paperwork chase.

We service nine leading gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so whatever is on your driveway, the correct fix happens on the first visit. Free second opinion on any written estimate if you’ve already been quoted.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Paradise

On Paradise’s tight sites, the parts work and the welding work are usually the same job. We approach it that way: diagnose the footing and frame first, then replace what’s actually failed.

Hinge Replacement in Paradise

On the west-side tract streets, gate hinges take a beating from seasonal dust and 115°F-plus summers, and a hinge that’s worn lets the gate sag long before the steel gives out. We replace hinges on wrought iron and tubular steel gates and re-check the post they hang from, because a new hinge on a leaning post won’t hold. If the lane has to stay open during the work, we plan around it.

Hinge Replacement in Paradise

Post Replacement in Paradise

A sagging gate usually fails at the hinge post, not in the middle of the panel. On Paradise’s 1970s and 1980s lots, decades of desert soil movement have shifted footings, so we reset or replace the post footing and set the new post true before we touch the gate. Fix the panel without the post and you fix it twice.

Post Replacement in Paradise

Rail Repair in Paradise

Heaved driveway slabs push slide-gate rails out of line, and a rail that’s a quarter-inch off will drag the whole gate. We straighten rails, re-weld cracked joints, and get the frame back to square so the gate travels clean. On block-pillar sites where there’s no room to work wide, we plan the repair so the gate stays on the track.

Rail Repair in Paradise

Custom Welding in Paradise

When a stock part won’t fit a 40-year-old gate, we fabricate it. Custom brackets, hinge plates, post caps, latch hardware – welded to match the existing frame rather than forced to fit. On Paradise’s mid-century and 1970s-80s ironwork, that’s often the difference between a repair that holds and a repair that comes back next season.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 623-9848

Trusted Brands We Service in Paradise

We’re trained and equipped on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – the brands actually on Paradise driveways and resort back-of-house gates. We don’t stock parts; that’s not how this trade works well. Instead we diagnose correctly on the first visit, order what’s needed, and get you back on the gate fast. If your operator is fine and the problem is the track, the footing, or the frame, we’ll tell you straight and fix the part that’s actually failing.

Common Gate Parts & Welding Problems We See in Paradise Homes

  • Cracked, heaved slabs under slide-gate tracks. The original track on many Paradise west-side lots was set directly into bare concrete, and desert soil movement has cracked and lifted it. The result is rack-and-pinion binding that looks like an operator fault but is really a footing failure.
  • Shared driveways with no swing clearance. Plenty of Paradise properties can’t fit a swing gate between the parked cars and the property line, so the slide gate stays – boxed in between block pillars with restricted working space. We plan the repair around tight access so the vehicle lane stays passable.
  • Heat-cooked control boards and photocells. 115°F-plus Paradise summers kill control boards, gate operator motors, and photo-eye sensors before the steel even thinks about failing. Dust and wind storms then jam the rollers and hinges on top of it.
  • Failed hinge posts and out-of-square frames. On 1970s-80s gates, sag almost always traces back to the hinge post footing. A panel that’s out of square needs custom welding, not a new motor.

Pricing for Gate Parts & Welding in Paradise, NV

Here’s what gate parts and welding work typically runs in Paradise. These are real ranges for this market, not ballpark guesses:

  • Hinge replacement: a typical hinge replacement in Paradise runs $150-$375 per gate, depending on hinge count and whether the post needs attention.
  • Post replacement: a typical post replacement in Paradise runs $450-$1,400, driven by footing depth, whether concrete has to be cut, and access.
  • Rail repair: a typical rail repair in Paradise runs $200-$600, depending on how far out of line the track has drifted.
  • Custom welding: a typical custom welding job in Paradise runs $250-$900, depending on fabrication complexity and finish.
  • Gate rollers and latch hardware: a typical roller or latch swap in Paradise runs $95-$260.

What moves the number: whether the slab has heaved, how tight the working space is, and whether the operator also needs work. The price is quoted and agreed before any work starts – no surprises on the bill. We’ll give you a free second opinion on any written estimate you already have, and there’s $50 off any repair over $250, plus a permanent 5% senior and veteran discount.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

The Real Culprit on Paradise West-Side Slide Gates

Paradise’s west-side 1970s and 1980s tract lots were built with slide gates whose tracks were set directly into bare concrete driveway slabs. Decades of desert soil movement have heaved and cracked those slabs, so the gate binds seasonally even when the LiftMaster or Linear operator is still running fine. That’s a parts-and-welding problem, not a motor problem – and it’s why a diagnosis that starts at the operator and stops there ends up costing more than the fix should.

Here’s how a typical call goes: a slide gate drags or jumps halfway along its travel on a cracked, heaved slab in a tight shared-driveway lot where a swing gate would never clear the parked cars or the property line. A qualified local pro checks the operator, the rack and pinion, the rollers, and the hinge post before touching anything – a sagging gate usually fails at the hinge post, not in the middle. The fix is usually re-setting or replacing the post footing, straightening rails, custom-welding the frame back to square, and swapping rollers or hinges, often with the vehicle lane kept passable throughout.

On the east side of Paradise, the work splits into a different world: high-traffic security gates for resort and airport-adjacent properties, where the parts work has to happen without interrupting access. Either way, we start at the footing and work up.

We Also Serve Cities Near Paradise

We handle gate parts and welding in the communities around Paradise too – Winchester, Whitney, Spring Valley, and Enterprise. If you’re just outside the Paradise line and need a hinge, post, rail, or weld done right, call us. Our Gate Parts & Welding team covers the whole area. Learn more about Gate Parts & Welding in Paradise.

Serving Paradise, NV – Our Local Coverage Area

We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Paradise

Call Ironworks Gate Co. Summerlin for Gate Parts & Welding in Paradise

Whether it’s a hinge on a 1970s tract gate or a post footing on a tight shared driveway, we diagnose it correctly and quote it honestly before we touch a bolt. A live person answers every call at (866) 623-9848, 24 hours a day. Free estimate on any job.

Standing offers: $50 Off Any Repair Over $250 · Free Second Opinion on Any Written Estimate · $89 Seasonal Tune-Up · Senior and Veteran 5% discount, always.

Written by the team at Ironworks Gate Co.

Why Paradise Chooses Ironworks Gate Co. Summerlin

We set the standard for gate parts & welding in Paradise.

30-60 Min Response

Fast dispatch across Paradise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Paradise

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Paradise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Paradise Customers Say

Trusted by homeowners across Paradise and surrounding areas.

★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez
★★★★★

"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."

Erin Sutton
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson

Ready for Gate Parts & Welding in Paradise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Paradise.

(866) 623-9848

Request a Free Estimate in Paradise

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch