Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Enterprise
If your gate has started to drag, sag, or catch on the ground, we can get it working the way it should. Ironworks Gate Co. Summerlin handles hinge replacement, post replacement, rail repair and custom welding for homeowners throughout Enterprise, and we know the 89139 corridor well. When you call (866) 623-9848, a live person answers, day or night, and we get an upfront price to you before any work starts. Most gate parts and welding jobs in Enterprise are finished in a single visit.
What makes work here different is the housing. Most of Enterprise was built between the 2000s and 2020s, so many gates are only five to fifteen years old and already out of alignment. That’s not a fluke. It’s the soil and the heat, and it’s worth understanding before you spend money on parts you may not need.
Why Ironworks Gate Co. Summerlin Is Enterprise’s Preferred Gate Parts & Welding Company
We’ve built a steady reputation across Enterprise by doing the small jobs the way we’d want them done on our own homes. Homeowners in Southern Highlands and Mountains Edge call us back because we quote the work before a wrench comes out, we explain what failed and why, and we back every job with the written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No arguing, no paperwork chase.
Our technicians have up to 13 years of experience, and they’re background-checked and uniformed on every visit. That matters when someone is working along the side of your house. It also matters that we specialize in gates only: hinges, posts, welds, rollers, latches and the automation that drives them. We’re not a general handyman outfit squeezing a gate call between drywall patches.
Enterprise customers often tell us they appreciate that we understand their HOA. In subdivisions like Southern Highlands, architectural rules dictate specific iron finishes and gate styles, and a sagging gate can trigger a violation notice if it isn’t corrected and documented. We know how those repairs are reviewed, and we plan the work around it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Enterprise
Hinge Replacement in Enterprise
More Enterprise gate calls than any other come down to the hinge. When caliche-laced soil shifts and the gate post creeps, the hinges carry load they were never meant to carry, and they wear out fast. We replace and re-align hinges so the gate swings true again instead of dragging across the driveway. If the hinge post itself has moved, we’ll tell you plainly rather than bolting on new hinges that won’t hold.

Post Replacement in Enterprise
A leaning post is usually a footing problem, not a metal problem. Across Enterprise’s master-planned communities, we reset and replace gate posts where expanding clay and caliche have pushed the footing out of plumb. This is heavier work, and we plan it as such: we set the post correctly, re-hang the gate, and check the latch, roller and operator alignment before we call the job finished.

Rail Repair in Enterprise
Summer heat expansion warps rails and knocks swing geometry out of true, so the gate binds even when the frame looks fine. Enterprise sees plenty of bent rails and cracking welds from gates that were pushed or struck, too. We repair and re-weld rails to restore the gate’s shape and strength. A straightened, properly welded rail is cheaper than a new gate and just as solid when the work is done right.

Custom Welding in Enterprise
Sometimes a repair calls for real fabrication: a broken bracket, a reinforced corner, a latch plate that needs to be rebuilt. Our Gate Parts & Welding team does custom welding on wrought iron and steel gates throughout Enterprise, and we finish it to match what’s already there. This is the work that keeps a fifteen-year-old gate going for another fifteen.
Trusted Brands We Service in Enterprise
We’re trained and equipped on nine major gate-automation brands, including LiftMaster, FAAC, Mighty Mule and BFT, so whatever operator is on your driveway, we likely know it well. We don’t stock parts locally and won’t pretend otherwise. What we do is diagnose the failure correctly on the first visit, source the right part, and get the gate running without a string of return trips. If your operator is a brand we don’t carry, we’ll still repair the gate and welding side and tell you honestly what your automation options are.
Common Gate Parts & Welding Problems We See in Enterprise Homes
- Builder-grade operators that quit early. Many Enterprise tract homes came with a swing gate operator that was specified to a builder’s budget, not to a Las Vegas summer. Once 110°F+ heat and UV degrade the plastic control box and arm hardware, the operator underperforms long before its time.
- Gates automated after the fact with no power run. A large share of Enterprise gates were delivered manual and automated later. That means there’s often no conduit or power at the gate line, so the operator was added without the proper wiring it needs to run reliably.
- Hinge posts that creep in caliche soil. Expansive soil movement throws hinge posts out of plumb and warps swing arms, so the latch, roller and rack and pinion misalign instead of the panel failing. The gate looks fine and still won’t close right.
- Heat-warped rails and fatigued welds. Summer expansion plus the occasional monsoon flood stress the frame. Rails bend, welds crack, and the gate stops sitting square in the opening.
Here’s the picture in a typical Enterprise call. A driveway swing gate in one of the master-planned subdivisions binds and drags. The hinge post has crept in the caliche soil while the heat has warped the swing arm and fatigued the operator’s control box. A qualified technician confirms the failure is at the hinge post rather than the panel, does the sag correction with new hinges or a reset footing, re-welds or replaces rails, and re-trues the arm or rack-and-pinion geometry before re-testing the operator with its safety photocell. Because these gates were often installed manual and automated later, the same visit may need a conduit and power run to the gate line, or a properly sized solar opener instead.
That’s the one thing that sets Enterprise apart from other parts of the valley: your gates are newer than the problem suggests. A gate that’s only a few years old shouldn’t sag. Here, it does, because of the soil and the heat, and because the build pattern left automation as an afterthought. We plan for all of it.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Enterprise, NV
We quote the price upfront and you agree to it before we touch the gate. No surprises on the bill. Here’s what Enterprise homeowners typically see:
- Hinge replacement: $150 to $350, depending on the number of hinges and whether the post needs adjustment.
- Rail repair and re-welding: $175 to $400 for most jobs.
- Post replacement or reset: $350 to $900, driven mainly by footing and concrete work.
- Custom welding and fabrication: $200 to $600, depending on scope.
What moves the number up or down is access to the gate, whether the operator has to come off, and whether we’re into concrete. Our standing offers apply here: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (866) 623-9848 for an exact quote. Estimates are free.
We Also Serve Cities Near Enterprise
Enterprise homeowners aren’t the only ones we look after. We also serve Spring Valley, Paradise, Winchester and Henderson, and the same approach applies across the valley: honest diagnosis, upfront price, work backed in writing. If you’re just outside Enterprise, call us and we’ll confirm your address falls in our service area before we schedule.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Enterprise
Your gate sags because the hinge post has crept in expansive caliche soil, not because the gate is old. Enterprise’s soil moves with moisture, and the post shifts a little each season until the gate no longer hangs square. Heat warps the swing arm on top of that. The fix is usually a hinge or post correction, which runs $150 to $900 depending on the work. Call (866) 623-9848 for an exact quote. Estimates are free.
Automating a manual gate takes three things: a correctly sized operator, a proper power and conduit run to the gate line, and entrapment protection to meet code. Most Enterprise gates were built manual with no conduit at the gate, so the power run is the part most homeowners don’t expect. We measure the gate first, then give you a written price for the whole job. Call (866) 623-9848 to set up a free measure.
Yes. UL 325 entrapment protection applies to any automatic driveway gate operator, including the ones on your Enterprise gate. That means the operator needs working safety devices, typically photocells or a sensing edge, so it reverses or stops if something is in the path. We check the safety devices on every visit and test them before we leave.
Yes, in most cases. We match the original powder-coat finish on wrought-iron gates common to Enterprise subdivisions like Southern Highlands and Mountains Edge, where HOA rules dictate the color and style. When a gate has been repaired, we can document it with photos for HOA approval if you’ve received a violation notice.
We’re trained and equipped on nine major brands, including LiftMaster, FAAC, BFT and Mighty Mule. Whatever operator is on your Enterprise driveway, we’ll diagnose it on the first visit and tell you honestly what the fix is. Call (866) 623-9848 to describe what’s happening and we’ll get you scheduled.
Get Your Enterprise Gate Working Again
If your gate is dragging, sagging, or you want to add automation that was never planned for, we’re ready to help. Call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. A live person answers 24 hours a day, seven days a week, and the price we quote is the price you pay. Done right, and backed in writing.
Written by the team at Ironworks Gate Co.