Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterGate Parts & Welding Near You in Summerlin, NV
If you’re searching for gate parts and welding near you in Summerlin, the answer is a phone call away. Ironworks Gate Co. Summerlin connects homeowners with independent local professionals who fabricate, weld, and fit gate hardware, and most jobs get handled on the first visit with an upfront price agreed before any work begins. Call (866) 623-9848 and a live person picks up, day or night.
We work with homeowners across Summerlin and the surrounding valley who have a gate that’s dropped, dragging, sagging at the hinge, or simply stopped latching. Whether it’s a wrought-iron driveway gate off Hualapai Way or a side-yard gate in The Ridges that won’t swing true anymore, the goal is the same: get the right part welded in, set the geometry straight, and make it close like the day it was hung.
Our technicians have up to 13 years of experience, are background-checked and uniformed, and every job is backed by our written 90-Day Done Right Promise.
Key Takeaways
- Gate parts and welding in Summerlin are handled by local independent professionals we connect you with, usually on the first visit.
- Hinge replacement, post repair, weld work, roller and track fixes, and latch alignment are all in scope.
- Upfront pricing is settled before any bolt is turned, so there are no surprises on the bill.
- A live person answers every call, 24 hours a day, 7 days a week.
- Every finished job is protected by a written 90-Day Done Right Promise.
Fast, Local Gate Parts & Welding
When a gate fails, it usually fails at a bad time – a Saturday before guests arrive, or the morning after a windstorm rolls through the valley. We connect you with local professionals who keep common gate hardware on hand: hinges, rollers, latches, stops, and weld-ready steel. That means most repairs get resolved without a second trip or a long wait for a part order.
Coverage runs across Summerlin and out into the neighborhoods that border it, so a call from Summerlin Ranch, The Trails, or Red Rock Country Club gets routed to a professional who already knows the area. Same-day and next-day windows are common for standard hinge, latch, and weld repairs. Larger fabrications or custom gate sections take a bit longer, and we’ll tell you honestly how long before you commit.
Every job starts with an on-site look at the gate, not a guess over the phone. The technician checks the hinge side, the post, the weld seams, and the latch strike, then quotes the work in plain numbers. If welding is needed, it gets done properly: cleaned, fitted, welded, ground, and primed so the repair lasts. When the work is finished, it’s covered in writing by the 90-Day Done Right Promise – if something isn’t right, we come back and make it right, no paperwork and no arguing.
Thousands of Summerlin gates are original to homes built in the late 1990s and early 2000s, and many are now on their second or third hinge set. The desert heat and the occasional hard freeze work on metal the same way they work on stucco and paint, and weld seams that held up for twenty years can finally start to show stress cracks. Knowing that pattern is half the repair.
Areas We Cover
Our service reaches across Summerlin and the neighborhoods around it, including Gate Parts & Welding in Summerlin, Spring Valley, Las Vegas, Enterprise, Winchester, Paradise, Sunrise Manor, and Whitney. If you’re just outside those boundaries, call us anyway – we’ll tell you straight whether we can get to you. You can also start from our home page to see the full scope of gate services.
For homeowners who’d rather start with repair than replacement, our gate repair in Spring Valley and gate repair in Las Vegas pages cover the common fixes. If your gate needs full automation, we also handle gate motors and openers in Enterprise, and we’re trained on nine leading brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Out toward the east valley, we serve gate repair in Paradise and gate repair in Whitney. North and west, see gate repair in Winchester and gate repair in Sunrise Manor. For access control work – keypads, intercoms, and entry systems – see gate access control in Spring Valley and gate access control in Las Vegas. New installs are covered on our gate installation in Summerlin page, and seasonal upkeep is on our gate tune-up in Las Vegas page.
How a Gate Parts & Welding Job Works
- Call and describe the problem. A live person answers (866) 623-9848 and asks what the gate is doing – dragging, squealing, not latching, hanging at the hinge. You’ll get a straight answer about what’s likely wrong and a scheduling window.
- On-site inspection. The technician looks at the hinge side, posts, rails, weld seams, and latch, then explains what needs repair versus replacement.
- Written upfront price. You’ll see the numbers before any work starts. If it’s a repair over $250, $50 comes off, and estimates are always free.
- Fabrication and welding. Hinges get replaced, weld seams get ground and re-welded, and the gate is set back to true. Most jobs finish the same day.
- Test, walk, and back it in writing. The gate is opened, closed, and latched several times before the technician leaves. Then the 90-Day Done Right Promise is applied to the job.
What We Repair and Weld
- Hinge replacement and hinge-side post repair
- Weld seam cracks, stress fractures, and broken joints
- Sagging and dropped gate frames
- Roller, track, and guide replacement
- Latch and strike alignment, including self-closing latches
- Post reinforcement and base plate repair
- Stop plates, caps, and decorative ironwork repairs
- Custom fabrication for gate sections that don’t match standard parts
One thing worth flagging: gate posts and hinge plates are heavy and unforgiving. A gate that’s dropped a half-inch can swing far enough to injure a hand or a child, and welding on a loaded hinge without proper bracing is how people get hurt. That’s exactly why we send trained, background-checked professionals rather than hand you a set of instructions. We’d rather show up and do it right.
FAQs
How fast can you get to my gate in Summerlin?
Most standard gate repairs in Summerlin are scheduled within 24 to 48 hours, and same-day windows are common for hinge, latch, and weld fixes. Call (866) 623-9848 and a live person will give you the soonest available window – estimates are free.
Do you serve my area?
We cover Summerlin and the surrounding valley, including Spring Valley, Las Vegas, Enterprise, Winchester, Paradise, Sunrise Manor, and Whitney. If you’re not sure whether your street falls inside those areas, call (866) 623-9848 and we’ll tell you straight.
How much does gate parts and welding cost in Summerlin?
Typical gate welding and parts repairs in Summerlin run between $180 and $650 depending on the size of the gate and the scope of the work. Hinge replacement is usually on the lower end; full weld repairs and custom fabrication push toward the upper range. Call (866) 623-9848 for an exact quote – estimates are free, and $50 comes off any repair over $250.
| Common Repair | Typical Range in Summerlin |
|---|---|
| Hinge replacement (per hinge) | $95 – $185 |
| Latch and strike alignment | $85 – $160 |
| Weld seam repair | $150 – $325 |
| Sag correction and frame adjustment | $150 – $300 |
| Roller or track replacement | $110 – $240 |
| Post reinforcement / base plate repair | $220 – $520 |
| Custom fabrication (per gate section) | $350 – $900 |
Every quote is given on site before work begins, and the $89 Seasonal Tune-Up is available for gates that just need adjustment rather than repair. Seniors and veterans get 5% off, always.
Can you come after hours?
Yes – a live person answers the phone 24 hours a day, 7 days a week, including nights and weekends. After-hours emergency work is scheduled based on availability, and a technician can often be out the next morning. Call (866) 623-9848 and we’ll get you on the schedule.
Get a Free Estimate Today
Whether your gate is dragging on the hinge, showing a stress crack at the weld, or just needs a proper tune-up, the fastest path is a phone call. We’ll send a qualified local professional, quote the work upfront, and back the job in writing with our 90-Day Done Right Promise. Call (866) 623-9848 for a free estimate – free second opinions on any written estimate are available too.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin and nearby areas.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson