Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Summerlin
If your driveway gate is dragging, stalling, or grinding somewhere on its travel, the problem is usually in the metal and the mounts, not the remote. We handle gate parts and welding for Summerlin homeowners from The Trails out to the estate entrances in The Ridges, and we know what this valley does to iron and steel. Summerlin sits against Red Rock, so your gate faces relentless sun, dry air, and wind that pours off the Spring Mountains. That combination works hinges, posts, and rails loose over time. Call (866) 623-9848 and a live person picks up, day or night.
Why Ironworks Gate Co. Summerlin Is Summerlin’s Preferred Gate Parts & Welding Company
We’re a gate company, not a general handyman outfit, and that focus shows on every Summerlin job. Our technicians have up to 13 years of experience and are background-checked and uniformed before they ever pull into your driveway. They’re trained on nine gate-automation brands, so they understand how the operator, the panel, and the hardware pull against each other. When the fix is welded and mounted right, the opener stops fighting the gate.
Summerlin customers tend to have one thing in common: they’ve dealt with a contractor who didn’t come back. We answer for that with the 90-Day Done Right Promise, a written guarantee that if something isn’t right, we come back and make it right. No arguing, no paperwork chase. Most repair jobs finish in a single visit, and the price is settled before a single bolt is turned. That’s the standard we hold on every job, whether it’s a latch that won’t catch or a full rail replacement on a 20-foot farm gate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Summerlin
These are the repairs that come up most on Summerlin’s decorative iron and steel gates. If you’re not sure which one you need, the team at our Gate Parts & Welding service can point you in the right direction.
Hinge Replacement
On Summerlin’s metal gates, hinge wear is the quiet cause behind most “the opener keeps faulting” calls. Heat-cycled steel and wind load work the hinge pins loose until the panel drops. We replace the hinges properly and re-check alignment so the gate swings true again.

Post Replacement
Hinge posts set in Summerlin’s caliche-heavy soil loosen over the years, and a loose post lets even a well-hung gate sag. We set and reinforce posts so the footing, not just the hinge, carries the weight. That’s the part most quick fixes skip.

Rail Repair
A bent rail on a wide Summerlin gate throws the whole panel out of alignment, and the operator grinds against it until it stalls. We straighten or replace the rail and re-level the rack and pinion so travel is smooth. On heavy acreage-style gates, rail repair has to account for operator capacity, not just the weld.

Custom Welding
When a section of your Summerlin gate cracks at a welded joint, we cut, fit, and weld it to match the original design. HOA-approved ironwork has to look right as well as hold, so we match the profile and finish. Sun and heat cycling stress those joints, which is why they fail.
Trusted Brands We Service in Summerlin
We’re trained and equipped on nine gate-automation brands, including Viking, Ghost Controls, DoorKing, and Elite. We don’t claim to stock parts locally, but we source what your gate needs and most jobs don’t stretch beyond a visit or two. Knowing the operator means we understand what your gate’s motor can and can’t pull. That matters on Summerlin’s solar-equipped entrances, where the panel has to match the load. Fast turnaround, no guesswork.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Summerlin Homes
- Solar opener stall faults mid-swing. Because many estate entrances in The Ridges and Red Rock Country Club run on solar gate openers, a rail repair that adds weight can push a panel past the operator’s duty rating. The gate stalls even though the weld is sound, so battery and panel sizing matter as much as the metalwork.
- Hinge posts working loose in caliche soil. Summerlin’s soil grabs and shifts, and a hinge post that loosens lets a wide swing gate sag until the latch misses and the operator strains. The fix is at the post and footing, not a patch on the panel.
- Desert dust packing into rollers and chains. Caliche grit blowing off Red Rock and the open lots along the 215 gets into gate tracks, rollers, and opener chains. Operators that run fine elsewhere seize or grind within a season unless the mechanism is cleaned and re-lubed for abrasive dust.
- Cracked welds on heat-cycled steel. Relentless summer sun and wind load stress welded rail joints until they crack. Left alone, a cracked joint plus a straining opener turns a small repair into a bigger one.
Pricing for Gate Parts & Welding in Summerlin, NV
A typical hinge replacement in Summerlin runs $150 to $350, and a post replacement including the footing work runs $350 to $900 depending on how far we set it. Rail repair generally lands between $250 and $700, and custom welding runs $200 to $650 by the length and profile of the section. Wide farm gates and solar-equipped entrances sit at the higher end because the operator and panel load have to be checked alongside the weld. We quote the price and agree on it before any work starts, so the bill matches the number you were given. Estimates are free, and we honor $50 off any repair over $250.
We Also Serve Cities Near Summerlin
We work throughout Summerlin and the surrounding valley, including Spring Valley, Las Vegas, Winchester, and Paradise. If you’re just outside Summerlin’s edge, ask when you call and we’ll let you know. The same upfront pricing and written guarantee apply wherever you are.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Summerlin
It’s usually both, and the gate side is the one that gets missed. A heavy steel panel with a bent rail or a loose hinge post drags against the operator, and no battery can pull a misaligned gate cleanly. We check the mechanics first, then confirm the panel weight against your solar openers’ duty rating. Call (866) 623-9848 for an exact quote, and estimates are free.
Generically, a visibly different panel or finish can trip an HOA violation in Summerlin even when the repair is mechanically sound, because most of the community was built to developer architectural standards and CC&Rs. We match the profile and finish to the original iron or steel so the work holds and looks approved. A free second opinion on any written estimate helps you compare before you commit. Call (866) 623-9848 to get started.
It’s the dust. Caliche grit off Red Rock and the open lots packs into rollers, tracks, and opener chains, and it grinds metal that would be fine in a wetter climate. Standard lubrication for moisture doesn’t cut it here; the mechanism needs cleaning and re-lubing for abrasive dust. Call (866) 623-9848 and we’ll set up a seasonal tune-up at $89.
If the hinge post has loosened in Summerlin’s caliche soil, a rail repair alone won’t hold and the gate will sag again. The real fix is a proper sag correction at the hinge post and footing, then re-leveling the rack and pinion. We’ll tell you straight which one your gate needs. Call (866) 623-9848 for a free estimate.
At minimum, the safety photocell should be confirmed to trip, the travel stops and limits re-set, and the operator re-checked against the panel’s new weight and balance. On solar-equipped entrances, the battery and panel sizing get confirmed too. We don’t return a gate to service until those checks pass and the gate is balanced on its hinges. Call (866) 623-9848 to schedule.
When your gate needs parts and welding done right and backed in writing, reach out. Call (866) 623-9848 for a free estimate in Summerlin today.
Written by the team at Ironworks Gate Co.