Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Boulder City, NV
We provide independent Mighty Mule service across Boulder City, from the Bureau-era bungalows in the historic core out to the newer lots near the edges. The one thing that makes our Mighty Mule work different here: in few other towns do operators get retrofitted onto 1930s government-built ironwork under historic preservation review, so the repair has to respect the gate as much as the motor. Ironworks Gate Co. Summerlin is an independent Mighty Mule service provider, not authorized or endorsed by the manufacturer, and we repair what’s actually failing rather than defaulting to a full swap. Call (866) 623-9848 and a live person answers, day or night.

Why Boulder City Residents Choose Us for Mighty Mule Service
Mighty Mule is one of the most common DIY-installed swing and slide operators on Boulder City’s older bungalows and edge-of-town lots. That means we see these units constantly, and we know the control boards, arm geometry, and battery behavior far better than a general gate outfit would. We keep genuine Mighty Mule control boards, arms, and batteries on hand for the fixes that matter, and quality aftermarket hinges, racks, and sensors where the OEM part adds cost without adding reliability.
Our background-checked, uniformed technicians are trained on nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so the correct diagnosis gets made on the first visit. Most Boulder City jobs finish in a single trip. Pricing is settled upfront, before a single bolt is turned, and every job is backed by our written 90-Day Done Right Promise. A live person answers every call, 24 hours a day, 7 days a week.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Mighty Mule Gate Repair Problems We Solve in Boulder City
These are the Mighty Mule faults that come up most often on Boulder City driveways.
- Control-board and battery failure after heat cycling. Mighty Mule’s solar-friendly low-voltage design is sensitive to aging batteries, and those batteries sag hard under Boulder City’s summer UV and heat. A battery that reads fine on a cool morning can drop the operator into fault by midafternoon.
- Arm and bracket wear on swing models (MM360 / MM371). Monsoon wind gusts and windblown dust work the pivot loose over seasons, and the gate starts to stall or reverse mid-travel. Re-torquing the bracket and realigning the arm usually solves it before the control board needs attention.
- Limit and sensor misalignment on slide models. Grit that blows in during dust storms clogs the rack, and the operator produces short-stroke or no-travel faults. Clearing the rack and resetting the limits is the fix most of the time.
- Rusted or corroded hinge and pier hardware. Older masonry-pier gates on Boulder City’s historic lots are prone to this, especially on the east side near Lake Mead where the operator and chain or rack pick up moisture exposure.
- Failing weld and mount repairs. Where an operator bracket has worked loose over years of heat and wind, the steel itself needs welding, not just a new bolt. We handle the metal and the automation together.
Mighty Mule Service in Boulder City: What Local Conditions Mean for Your Equipment
Boulder City’s historic core is one of the few markets in the country where gate technicians routinely repair 1930s Bureau of Reclamation-built ironwork under the city’s historic preservation review. That single fact changes the whole job. Retrofitting a modern Mighty Mule operator onto an original Bureau-era gate means hiding the arm, wiring, and battery in ways that respect government-era fabrication – you can’t just bolt a modern bracket across a 1930s face and call it done. On the older bungalows along the historic streets off Nevada Way, we frequently find Mighty Mule swing operators mounted with hardware that was never designed for the gate it’s on. The operator itself is fine. The marriage between operator and original gate is what needs attention, and repair with patina-matched hardware usually beats swapping the whole gate.
Mighty Mule Models & Products We Service in Boulder City
We service the Mighty Mule lines that actually show up on Boulder City driveways: the MM360 and MM371 single swing openers, the FM350 dual-swing opener, the MM572 slide gate operator, and the FM series rack-and-pinion slide operators. For each one, the parts call is made per job. Genuine Mighty Mule control boards, arms, and batteries go in where reliability depends on it, and quality aftermarket hinges, racks, and sensors go in where the OEM part adds cost without benefit. We don’t claim to stock parts locally, and we don’t need to – the right part gets sourced for the specific model and failure.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Boulder City
Pricing depends on the failure, the model, and how much of the original gate hardware needs attention. A battery-and-control check runs less than a full operator diagnosis, and weld or rust repair on a pier mount adds scope. What stays constant: the price is quoted and agreed before any work starts, and it’s settled before a single bolt is turned.
| Service | Typical Range |
|---|---|
| Diagnostic visit + battery check under load | $89 – $139 |
| Control-board replacement (MM360 / MM371 / FM350) | $220 – $380 |
| Arm, bracket, and pivot re-torque / realignment | $150 – $260 |
| Slide rack and limit sensor service (MM572 / FM series) | $180 – $320 |
| Weld and rust repair on operator mount or pier hardware | $240 – $480 |
We also run standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (866) 623-9848 for an exact quote – estimates are free, and a live person answers.

Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Boulder City
Yes, and we do it regularly – but the mounting has to respect the original ironwork. On Boulder City’s Bureau-era gates, the arm, wiring, and battery get routed to hide behind the existing fabrication rather than bolted across it. Because the historic district’s original metalwork is often protected by the city’s historic preservation review, the honest approach is a retrofit that keeps the gate looking as it did while the operator does its job quietly. Call (866) 623-9848 to talk through your gate before scheduling.
It’s almost always battery sag under load, or a wind-loosened arm bracket. Mighty Mule’s low-voltage design depends on a healthy battery, and Boulder City’s afternoon heat pushes an aging one past its limit. We check the battery under load first, then the pivot and bracket, before touching the control board. Estimates are free – call (866) 623-9848.
More often than not, it’s the rack. Windblown grit clogs the rack and knocks the limit sensor out of alignment, which produces short-stroke or no-travel faults that look like a dead motor. We clear the rack, reset the limits, and test travel before recommending any motor work. Call (866) 623-9848 for an exact diagnosis.
Yes. Properties on Boulder City’s east side near Lake Mead pick up moisture exposure that the rest of town doesn’t see, and the operator housing, chain, and pier hardware corrode faster for it. We inspect for rust at the mount and treat it as weld-and-rust work where needed, not just a part swap.
We can. Ironworks specializes in gate access control alongside repair, so a Mighty Mule operator can be paired with keypad, intercom, or phone access without replacing the operator itself. This work is measured and scheduled, not same-day, and priced in writing before anything starts. Call (866) 623-9848 for a free estimate.
Service Areas Near Boulder City
Alongside Boulder City, we serve homeowners across the Las Vegas valley: Summerlin, Spring Valley, Las Vegas, Enterprise, and Winchester. For Mighty Mule work specifically, we also cover Henderson and Whitney, and you can read more about our broader Boulder City service area.
Book Your Mighty Mule Service in Boulder City Today
If your Mighty Mule operator is reversing, stalling, or just not closing like it used to, call us. We repair Mighty Mule gates across Boulder City, and same-day availability is often possible on repair calls. A live person answers (866) 623-9848 any hour, any day, and every job is backed in writing by our 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co.