Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Boulder City
If your gate has stopped latching, started dragging, or won’t answer the remote, you’re in the right place. We repair electric and automatic gates, hinge and post failures, sagging panels, and rusted or cracked welds for homeowners throughout Boulder City, including the historic district and the neighborhoods around 89005 and 89006. Our technicians know this town’s older ironwork and the desert conditions that wear it down, so we arrive already understanding what we’re likely to find. Work is priced upfront and agreed before anything starts, and every job is backed in writing. Call (866) 623-9848 and a live person will pick up, day or night.
Why Ironworks Gate Co. Summerlin Is Boulder City’s Preferred Gate Repair Company
Boulder City homeowners call us because we treat older gates as worth fixing rather than worth replacing by default. We’re a dedicated gate company, not a general handyman outfit, and our technicians have up to 13 years of experience with the hinges, posts, welds, motors, and control boards that actually fail on a driveway gate. We service the full spread of automation brands, which matters in a town where a 1990s operator sits behind one gate and a newer unit sits behind the next.
A live person answers the phone every hour of every day, so a gate stuck open on a Friday night doesn’t wait until Monday. Quotes are settled before a single bolt is turned, and the 90-Day Done Right Promise is written into every job: if it isn’t right, we come back and make it right. That’s the standard whether it’s our first call at your address or our four-hundredth in the neighborhood.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Boulder City
A good share of what we see in Boulder City is legacy metal and aging automation, and the fix isn’t always the same as it would be on a new build. Here’s how we approach the work most often requested here.
Hinge & Post Repair
On the Bureau-era bungalows in the historic core, the most common failure is a hinge post that has crept and loosened in its footing after decades of monsoon wind and shifting desert soil. The panel usually looks fine, but the post is the real problem. We probe the footing, re-level or replace it as needed, and rehang the gate so it swings true rather than patching the symptom.

Gate Realignment
A gate that scrapes, rubs, or won’t line up with its latch is usually a geometry problem, not a tired hinge. We correct sag on the panel, adjust the post and hardware, and get the gate to close cleanly again. On tight historic-district lots, that alignment work is often more delicate than it sounds.

Weld & Rust Repair
Lake Mead shoreline corrosion on east-side properties eats into welds, hinges, and latches on gates hung long before anyone thought about modern safety standards. We cut out the failed metal, weld in sound replacements, and treat and finish the repair so it holds. Where the original iron should keep its character, we match the patina instead of covering it with fresh paint.

Electric & Automatic Gate Repair
Powder-coated tracks and rollers pack with desert dust and sand, stalling the rack and pinion and tripping the operator. Obsolete control boards on older LiftMaster, Linear, and FAAC units go unsupported. We diagnose the actual failure, replace what’s dead, and confirm the safety devices are working before we leave. For a fuller look at the scope, see our Gate Repair service.
Trusted Brands We Service in Boulder City
We’re trained and equipped on nine gate-automation brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule, plus LiftMaster, FAAC, BFT, Linear, and Viking. That range matters here because the operators behind Boulder City gates span several decades of design. We don’t stock parts locally, so we diagnose on the first visit and return with the correct components rather than guessing at a workaround. Whatever is on your driveway, the goal is the right fix on the first try.
Common Gate Repair Problems We See in Boulder City Homes
- Hinge posts that have crept in their footings. On 1930s-40s Bureau-era pedestrian gates, seasonal monsoon wind and loose desert soil work the post loose, and the panel sags at the post rather than in the middle. The gate looks straight until you watch it swing.
- Dust-packed tracks and rollers on sliding gates. Blowing sand and grit pack into rack and pinion tracks and rollers, stalling older automatic gates and tripping the operator. Regular cleaning helps, but worn rollers and racks need replacing.
- Obsolete and unsupported control boards. Older LiftMaster, Linear, and FAAC boards fall out of support, and the entrapment protection required under UL 325 (photo-eyes or edge sensors) is often missing or dead alongside them. Both usually come up on the same visit.
- Corrosion on east-side properties near Lake Mead. The shoreline adds corrosion exposure that rusts welds, hinges, and latches on gates hung decades ago. Catching it early is cheaper than replacing a post that has rusted through.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Boulder City, NV
A typical hinge and post repair in Boulder City runs $275-$550, depending on whether the footing needs re-leveling or full replacement. Gate realignment usually lands between $150 and $350. Weld and rust repair runs $200-$600 based on how much metal has to be cut out and refinished, and electric or automatic gate repair commonly falls in the $250-$700 range once parts and control-board work are included. Historic-district jobs that call for patina matching can sit at the top of those ranges because the finish work takes more care. You get a written price before anything starts, so the bill matches the quote. Estimates are free, and there’s $50 off any repair over $250.
We Also Serve Cities Near Boulder City
We also work with homeowners in Henderson, Whitney, Paradise, and Enterprise, and the same scheduling and written-pricing standard applies across the board. If you’re just outside Boulder City and wondering whether we reach you, call and ask. For the full picture of what we handle in Boulder City, start here, or compare notes with the neighboring service area.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Boulder City
Yes, and in most cases repair is the better answer. The original wrought-iron pedestrian gates and masonry-pier driveway gates on those Bureau of Reclamation bungalows are frequently subject to the city’s historic preservation review, so swapping in a modern gate isn’t a simple call. A qualified technician can re-level or replace the hinge post footing, do sag correction on the panel, and match patina on the original iron, keeping the gate that belongs on the house. Call (866) 623-9848 for a free estimate.
Because the post is usually the real failure, not the panel. On Bureau-era bungalows in the historic core, the original iron hinge post shifts in its footing over decades of monsoon wind and loose desert soil, and the gate sags at the post rather than in the middle. A technician probes the footing, re-levels or replaces it, and corrects the panel so it swings true. Call (866) 623-9848 to get it looked at.
Often, yes, but it depends on the operator and how much of it is still serviceable. An obsolete LiftMaster, Linear, or FAAC board can frequently be upgraded or replaced while keeping the existing motor and frame, which costs less than a full new operator. Sometimes the honest answer is that replacement is the cheaper path over the next few years. Call (866) 623-9848 and we’ll give you the straight comparison in a free estimate.
If you have an automatic gate operator, yes. UL 325 requires entrapment protection such as photo-eyes or edge sensors, and on older Boulder City gates that protection is often missing or dead. We check it on every automatic gate repair and get it working before we close the job. Call (866) 623-9848 to have yours checked.
Both do, and they’re two of the most common reasons automatic gates fail here. Monsoon wind drives sand into tracks and rollers, stalling the rack and pinion and tripping the operator, while shoreline corrosion on east-side properties rusts welds and hinges. Regular servicing keeps both in check. Call (866) 623-9848 for an $89 seasonal tune-up.
Call Ironworks Gate Co. Summerlin for Gate Repair in Boulder City
Whether it’s a Bureau-era iron pedestrian gate that won’t latch or a legacy operator with a dead control board, we’ll tell you honestly what can be repaired and when replacement is the cheaper answer. The price is quoted and agreed before any work begins, every job carries the written 90-Day Done Right Promise, and a live person answers the phone 24 hours a day. Call (866) 623-9848 for a free estimate and a free second opinion on any written estimate you already have.
Written by the team at Ironworks Gate Co.