Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Summerlin Homeowners
Gate installation in Summerlin, NV typically runs $2,400 to $6,800 for a driveway gate, motor and access control, with the final number settled in writing before any digging starts. We’re Ironworks Gate Co., and gates are the only thing we do. Our technicians have up to 13 years of experience welding frames, hanging gates and setting up automation on nine major brands, and they work background-checked and in uniform on every job. If you’re weighing a new gate for a home near The Ridges, Red Rock Country Club or Summerlin Centre, call (866) 623-9848. A live person answers, 24 hours a day.

Summerlin’s high-desert wind matters here. The gusts that sweep over Red Rock eat cheap hardware and strain undersized hinges, so a gate installed for a coastal climate won’t last a decade on a Summerlin street. We build for the desert.
What Our Gate Installation Service Includes
Every gate job is different, and ours starts with a free on-site measure, not a phone quote. Here’s what each type of gate involves, and when it’s the right call for your property.
Driveway Gate
A driveway gate is the main entry point for vehicles, and it’s usually the first thing people notice about a property. You need one when your current gate has rusted through, won’t clear the ground anymore, or when you’re adding secure parking for your home. We measure the drive width, check the grade and confirm a suitable post footing before we quote, because settling soil in Summerlin makes a poorly anchored gate fail within a couple of seasons.

Pedestrian Gate
A pedestrian gate is the walk-through gate alongside the driveway, and it’s where most families actually enter the property day to day. You need a new one when the old latch sticks, the hinge has sagged, or you’re increasing safety by separating foot traffic from vehicle traffic. We weld the frame, set the posts square, and line up the latch so it swings and closes with a single hand.

Sliding Gate
A sliding gate rolls along a track rather than swinging open, which makes it the better choice for tight driveways and sloped approaches. You want a sliding gate when there’s no room for a swing arc, or when the wind catches a swinging gate and strains the operator. We check the track line, level the posts and set the operator to match your gate’s weight so the motor doesn’t labor on every cycle.

Swing Gate
A swing gate is the classic hinged gate, and it’s still the most common style we install around Summerlin. You need one when you want a traditional look that matches the architecture of the home, or when the driveway is wide and has room to swing. We set the posts to carry the span, use heavy hinges rated for the gate’s weight, and add a positive stop so it doesn’t slam back into the fence.
Double Gate
A double gate uses two leaves that meet in the middle, which lets you clear a wider opening than a single swing gate. You need one for wide driveways, for hauling trailers or RVs through, or when a single leaf would be too heavy to hang safely. We build both leaves to the same weight and add a drop rod on the passive side so the two halves stay even over years of use.
Security Gate
A security gate is the vehicle and pedestrian entry point that controls who comes onto the property, and it works with your keypad, intercom or remote. You want one when you’re adding layers of access control to a home, or when the family wants to know exactly who can come up the drive. We set the operator, wire the access points and walk you through the whole system before we leave. Gate installation in Summerlin has to account for the local climate and the soil, and our home services cover the full scope from the hinge to the keypad.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Installation
Gate motors are not all built the same, and we’re trained and equipped on nine leading automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. We work with LiftMaster operators regularly, and we know where those units wear out on Summerlin gates that fight the wind. With FAAC swing and sliding operators, we set the torque and travel limits by the book so the motor runs cool and lasts.
BFT equipment has a specific setup sequence, and if the calibration is skipped the gate will chatter or stall on cold mornings. We handle that setup as part of the install, and we test every cycle before we call the job done. Whether you have Mighty Mule on your existing gate or any other make, we can help you choose the right replacement and set it up correctly.
Signs You Need Gate Installation Right Now
Sometimes a gate just needs a repair, and we’ll say so. But these are the signs it’s time to replace the gate rather than patch it.
- The gate no longer meets the post cleanly. If you can see daylight at the latch, or the gate has to be lifted to close, the posts have shifted and the gate has warped. Patching the hinge won’t fix a frame that’s gone out of square.
- Rust has moved past the surface. A little surface rust is normal in the desert. But when the rust is bubbling through the weld seams or the bottom rail is thinning, the steel has lost its strength and a repair won’t hold.
- The operator keeps stalling or reversing. When a motor strains to move the gate, the gate is usually too heavy or the hinges are dragging. Replacing the operator won’t help if the gate itself is the problem.
- The gate is too small for the driveway. If vehicles clip the gate on the way in, or the opening is narrower than the drive, a wider replacement will save you a scraped bumper every time.
- The access control is outdated. Old keypads with a single code, or a gate with no receiver, means anyone with the code gets in. New equipment ties the gate to your household’s access control.
Our Gate Installation Process – Step by Step
The gate is going to be on your driveway for decades, so the process matters as much as the finished product. Here’s how we handle it.

- 1
Free on-site measure and walk-through. We look at the drive, the slope, the soil and the fence line, and we talk through what you want the gate to do. This is where the right gate gets chosen, before any price is quoted.
- 2
Written quote, agreed before work starts. We put the whole job in a written quote with the gate, posts, hardware, operator and access control itemized. You’ll see every line before we turn a bolt, and the price you agree to is the price on the bill.
- 3
Post setting and footing work. We set the posts deep and square, with proper footings for the soil on your property. A gate that leans after a year was installed on a footing that wasn’t ready for Summerlin’s soil and wind loads.
- 4
Hanging, welding and hardware setup. The gate gets hung plumb and level, hinges get placed for the weight, and the welds get checked. No gate leaves our hands until it swings free and closes on its own weight.
- 5
Automation, access control and walkthrough. We set up the operator, connect the keypad and remotes, and cycle the gate a number of times to make sure everything is dialed in. Then we walk you through the whole system and leave you with the written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Summerlin?
Gate installation costs in Summerlin depend on the size, material and automation you choose. The estimates below are typical for this market and will get you in the range before we do a free measure.
| Job | Typical range | What drives the price |
|---|---|---|
| Pedestrian gate, new install | $750 – $1,600 | Width, material and hinge hardware |
| Single swing driveway gate | $2,400 – $4,200 | Span, gauge of steel, footing work |
| Double driveway gate | $3,800 – $6,000 | Two leaves, drop rod, span and weight |
| Sliding gate | $3,200 – $5,500 | Track length, leveling, operator load |
| Motor and operator install | $1,200 – $2,800 | Brand, weight of gate, access control |
| Security gate with access control | $4,500 – $6,800 | Keypad, intercom, wiring run |
What moves the number: the gauge and finish of the steel, whether the drive is sloped, the depth of the footings, and whether you want access control wired at the same time. What saves money: choosing the right operator for the gate’s weight the first time, so you’re not buying a motor twice.
Every price is quoted and agreed before any work starts. If you have a written estimate from another company, we offer a Free Second Opinion, and we’ll tell you honestly if it’s a fair deal or if the scope is off. The $89 Seasonal Tune-Up keeps an install running tight year after year, and we offer a standing 5% Senior and Veteran discount.
Gate Installation Near Summerlin – Our Service Area
We handle gate installation in Summerlin and the surrounding neighborhoods, and we regularly work in Spring Valley, Las Vegas, Enterprise, Winchester, Paradise, Sunrise Manor and Henderson, along with outlying areas like Boulder City and Sandy Valley. See our gate installation in Spring Valley page for that area’s details, or check our gate installation in Las Vegas page for the wider valley. Residential installs are scheduled promptly, and repairs get priority response.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Installation in Summerlin
Gate installation is the full job of setting new gate posts, hanging the gate, welding and finishing the frame, and setting up the motor and access control. Beyond hanging the gate, it includes the footing work, the hardware, the operator setup and testing every cycle. With Ironworks Gate Co., the install ends with a walkthrough of the whole system and the written 90-Day Done Right Promise.
A pedestrian gate can be measured and installed within a day, while a driveway gate with an operator usually takes a full day and sometimes two depending on footing work. Because installation is measured and scheduled, we book it in rather than promise same-day service. Call (866) 623-9848 for a free measure and we’ll give you a schedule when we quote.
A pedestrian gate typically runs $750 to $1,600 in Summerlin, while a single driveway gate runs $2,400 to $4,200 and a double gate lands around $3,800 to $6,000. The final price depends on the gate’s size, material, footing work, the operator and any access control. Call (866) 623-9848 for an exact quote, and the estimate is free.
Yes, we’re trained and equipped on Mighty Mule along with eight other brands, including LiftMaster, FAAC and BFT. That means we can set up the right operator for your gate and calibrate it the first visit, not the second. Call (866) 623-9848 with the make and model and we’ll tell you what’s involved.
Yes, a live person answers our phone 24 hours a day, 7 days a week, so a stuck or damaged gate never has to wait until Monday. We can talk through the situation on the call and set up priority repair service. Call (866) 623-9848 any time and you’ll reach a person, not a voicemail.
Every completed installation is covered by our written 90-Day Done Right Promise. If the gate isn’t right, we come back and make it right, no arguing and no extra paperwork. There’s no fine print and no arguing over whether it counts.
Clear vehicles, trash cans and anything moveable out of the drive and the walk-through path before we arrive. Let us know if there are utilities or irrigation lines near where the posts will go, so the footings can be planned around them. Beyond that, just have your questions ready and we’ll handle the rest.
Schedule Your Gate Installation Service in Summerlin Today
When you want a gate that closes right and works without fuss, call Ironworks Gate Co. at (866) 623-9848. We’ll schedule a free on-site measure, put the full job in a written quote, and settle the price before we start. A live person answers 24 hours a day, most jobs are finished in a single visit, and the 90-Day Done Right Promise stands behind the work in writing.
Written by the team at Ironworks Gate Co.