Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Summerlin, NV
Hinge and post repair in Summerlin typically costs between $145 and $420, and it’s usually a same-day job for a gate that’s sagging, dragging, or leaning off a rotted post. The hinge is the pivot point of the whole gate, and the post is the anchor holding it upright – when either gives, the gate follows, and a motor that once worked fine starts straining or quitting out. That’s the problem we fix, and we fix it the way a trusted tradesman would: diagnose why the metal moved before we touch a bolt, quote it plainly, and stand behind the work in writing.
Ironworks Gate Co. is a gate specialist, not a handyman with a welder in the truck. We handle everything from hinges and welds to keypads and automation, which matters here because a loose hinge is rarely just a loose hinge. It’s often the first thing you notice before a lifting arm fails or a LiftMaster operator starts jamming. Call (866) 623-9848 for a free estimate, and a live person will answer – day or night. If you’re not sure whether your problem is a hinge, a post, or something in the opener, start with our Gate Repair page, then come back here.
When You Need Hinge & Post Repair
Summerlin gates take a specific kind of punishment. The desert sun bakes steel through the day, the winter nights drop hard enough to move soil, and the irrigation lines that keep the palo verde and desert willow healthy also keep the base of a metal post damp. Add in the clay-heavy soil in pockets around The Ridges and Red Rock Country Club that swells and settles with the seasons, and you get posts that work loose faster than most homeowners expect. Here’s what usually walks a Summerlin homeowner to the phone:
- The gate droops and drags on the ground. The latch no longer lines up and the far edge scrapes the driveway on the return swing. In Summerlin this is often a hinge pin worn oval or the top hinge pulling loose after years of daily cycles in full sun.
- The post leans or feels loose at the base. Push the gate and the post moves with it. A leaning post can be a bent post, but just as often it’s soil that has given way after a wet winter or a footing that was never set deep enough for the grade on your street.
- Rust bubbling out of a hinge weld. You see it before you feel it – orange streaks down the hinge leaf or a rough patch at the weld line. Left alone, a rusted hinge eventually shears and the gate hangs on one point, which is hard on the opener and harder on anyone standing near it.
- The opener groans, binds, or reverses. A Mighty Mule or Linear that suddenly struggles up the first few feet is often fighting a hinge that has started to bind. The motor is telling you the gate has moved; the fix is usually at the hinge, not the control box.
- A post is dead, broken, or leaning after the wind. Monsoon-season gusts that sweep through the west side of Summerlin can bend a post outright or crack a weld at the base plate. A post out of plumb puts the whole gate and the opener off as one unit, so it has to be corrected, not shimmed.
- The gate has started to sag toward the far post. The gap at the latch side widens and the gate no longer sits square. That’s the classic signature of a settling post or a hinge pulling out of the frame, and it gets worse the longer it’s ignored.
Our Hinge & Post Repair Process
Most jobs are finished in a single visit. Here’s how a hinge and post repair runs, start to finish:
- We look before we lift a wrench. We check the gate’s swing, the hinge condition, the post plumb, the footing, and the opener together. A post that looks fine but flexes under a load tells us more than one that’s already cracked, and we listen for the bind a motor is feeling before we touch anything.
- We settle the price upfront. You get a plain quote before a bolt is turned. No meter, no surprise line items, no “we found more once we got in there” that lands on your bill after the fact.
- We fix the cause, not just the symptom. If the post is sound, we rebuild or replace the hinge and re-weld. If the post is the problem, we re-set or replace it so the gate hangs true again. On a rusted or sheared hinge we cut back to clean metal and weld a new leaf, then prime and seal the repair so the sun doesn’t undo it next season.
- We re-align the opener to the new geometry. Once the gate is square, we check that the operator no longer has to force the gate through the first inches of travel. We’re trained on nine gate-automation brands – LiftMaster, FAAC, BFT, and the rest – so the motor that’s already on your driveway gets set up correctly, not patched to limp through.
- We test the full cycle and hand it back. Open, close, latch, safety reverse. You watch it run. Then it’s covered by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right, every time.
Hinge & Post Repair Pricing in Summerlin
What a hinge and post repair costs in Summerlin depends on whether you’re fixing a hinge, a post, or both, and whether a weld is involved. These are honest ranges for this market, not teasers:
| Job | Typical range |
|---|---|
| Replace one hinge or hinge set | $145 – $260 |
| Re-weld a hinge or frame joint | $175 – $300 |
| Re-set a loose or leaning post | $200 – $380 |
| Replace a dead or broken post | $280 – $480 |
| Post, hinge, and opener re-alignment together | $350 – $620 |
What moves the number: the size and weight of the gate, whether the post is steel or wood, how much concrete and digging the post job takes, and whether an ornamental section has to come off to reach the weld. Spring-loaded and automated gates add a little to the job because there’s more to safely re-tune once the geometry changes. The quote you get upfront is the quote you pay.
Standing offers in Summerlin: $50 off any repair over $250, a free second opinion on any written estimate another company has given you, and a permanent 5% Senior and Veteran discount. If it’s a lighter tune-up you’re after, our $89 seasonal service keeps hinges and posts checked before the summer heat and winter cold chew on them. None of that is pressure – it’s just a fair break for the work.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Summerlin?
Most hinge and post repairs in Summerlin run $145 to $480 depending on whether you need a hinge replaced, a post re-set, or a full post replacement. A single hinge swap sits at the low end; a new post with the gate re-hung and the opener re-aligned runs higher. Call (866) 623-9848 for an exact quote – estimates are free and the price is settled before any work starts.
Can you repair a leaning gate post without replacing it?
Often yes. If the post metal and the footing are sound and the post has just worked loose, we can re-set it plumb and re-anchor it rather than replace it. If the metal is cracked, severely rusted, or bent from wind or impact, replacement is the honest answer. We look at both before we quote, so you’re not paying for a new post when a re-set would have done it.
My gate is sagging and my opener is straining. Is it the hinge or the motor?
Most of the time it’s the hinge or post, not the opener. A gate that has dropped out of square puts a bind at the start of travel, and the motor strains to push through it. We check the hinge, the post, and the opener together so the real cause is fixed in one visit. A DIY fix and a second trip for a motor you didn’t need to replace is a fair chunk of what we save you.
How quickly can you come out to Summerlin?
Hinge and post repairs are usually same-day or next-day depending on the week, and most finish in a single visit. A live person answers the phone 24 hours a day, 7 days a week, so you’re not leaving a voicemail on a Sunday and waiting until Monday. Call (866) 623-9848 and we’ll get you scheduled.
Is it cheaper to repair the hinge and post or replace the whole gate?
Repair is almost always cheaper when the gate panels and frame are sound, and it often is – hinges and posts are what fail first on a well-made gate. A full replacement makes sense only when the frame itself is rusted through or bent beyond straightening. Our technicians have up to 13 years of experience telling the two apart, and they’ll tell you straight which one you’re dealing with. For the broader scope, see our Gate Repair in Summerlin page.
Related Services & Areas We Cover
Word travels on Summerlin porches, and neighbors often ask us the same questions. If a hinge is worn and the opener is old but you’re not ready to replace either, many homeowners start with a gate repair visit that covers both. If you’re weighing a fresh motor, we service Mighty Mule and BFT units as readily as LiftMaster and FAAC, and we’ll always tell you when repair makes more sense than replacement.
- Gate Repair – the full scope, from hinges and welds to keypads and automation
- Gate Repair in Summerlin – the neighborhood service page for this area
- Home – who we are and what we stand behind
- Gate Installation – when a new gate is the right call instead of repair
- Gate Motors & Openers – service on nine leading automation brands
- Gate Access Control – keypads, call boxes, and entry systems
- Gate Parts & Welding – custom metalwork and weld repair
- Gate Repair in Henderson – nearby service area
- Gate Repair in North Las Vegas – nearby service area
- Gate Repair in Las Vegas – nearby service area
- Gate Tuning & Maintenance – the $89 seasonal tune-up
- Gate Safety Inspections – catch hinge and post wear before it fails
Call for a Free Estimate
Whether your gate is dragging, a post is leaning, or you’re not sure what’s wrong and just want a straight answer, call Ironworks Gate Co. Summerlin at (866) 623-9848. You’ll get a live person, an upfront price, a single-visit fix in most cases, and a 90-Day Done Right Promise in writing behind every job. A gate that closes like the day it was hung is what we’re after – done right, and backed in writing.
Written by the team at Ironworks Gate Co. Summerlin, serving Summerlin.