Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Paradise
Ironworks Gate Co. Summerlin handles gate parts and welding for Paradise homeowners and property managers who are tired of gates that drag, sag, or jump the track. We work the tight lots here every week – the shared driveways, the slide gates boxed in between block pillars, the driveway lanes that have to stay passable while we work. Our technicians have up to 13 years of experience, and a live person answers the phone 24 hours a day at (866) 623-9848. Most jobs settle on the first visit, with the price agreed before a single bolt is turned.
Why Ironworks Gate Co. Summerlin Is Paradise’s Preferred Gate Parts & Welding Company
Paradise isn’t one kind of place, and gate work here shows it. On the west side you have 1960s through 1980s tract homes – stucco on frame, slump-block walls, concrete driveways – where the original wrought-iron and tubular-steel gates are now on their second or third motor. On the east side you have the Strip corridor and airport-adjacent commercial property, where high-traffic gates have to keep working because access can’t stop. We handle both, and we know which one we’re walking into before we pull up.
Our Paradise customers call us because we show up when we say we will and we quote the job before we start it. Background-checked, uniformed technicians work in your yard the way they’d work in their own mother’s. Every completed job carries the 90-Day Done Right Promise in writing – if it isn’t right, we come back and make it right. No arguing, no paperwork chase.
We service nine leading gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so whatever is on your driveway, the correct fix happens on the first visit. Free second opinion on any written estimate if you’ve already been quoted.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Paradise
On Paradise’s tight sites, the parts work and the welding work are usually the same job. We approach it that way: diagnose the footing and frame first, then replace what’s actually failed.
Hinge Replacement in Paradise
On the west-side tract streets, gate hinges take a beating from seasonal dust and 115°F-plus summers, and a hinge that’s worn lets the gate sag long before the steel gives out. We replace hinges on wrought iron and tubular steel gates and re-check the post they hang from, because a new hinge on a leaning post won’t hold. If the lane has to stay open during the work, we plan around it.

Post Replacement in Paradise
A sagging gate usually fails at the hinge post, not in the middle of the panel. On Paradise’s 1970s and 1980s lots, decades of desert soil movement have shifted footings, so we reset or replace the post footing and set the new post true before we touch the gate. Fix the panel without the post and you fix it twice.

Rail Repair in Paradise
Heaved driveway slabs push slide-gate rails out of line, and a rail that’s a quarter-inch off will drag the whole gate. We straighten rails, re-weld cracked joints, and get the frame back to square so the gate travels clean. On block-pillar sites where there’s no room to work wide, we plan the repair so the gate stays on the track.

Custom Welding in Paradise
When a stock part won’t fit a 40-year-old gate, we fabricate it. Custom brackets, hinge plates, post caps, latch hardware – welded to match the existing frame rather than forced to fit. On Paradise’s mid-century and 1970s-80s ironwork, that’s often the difference between a repair that holds and a repair that comes back next season.
Trusted Brands We Service in Paradise
We’re trained and equipped on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – the brands actually on Paradise driveways and resort back-of-house gates. We don’t stock parts; that’s not how this trade works well. Instead we diagnose correctly on the first visit, order what’s needed, and get you back on the gate fast. If your operator is fine and the problem is the track, the footing, or the frame, we’ll tell you straight and fix the part that’s actually failing.
Common Gate Parts & Welding Problems We See in Paradise Homes
- Cracked, heaved slabs under slide-gate tracks. The original track on many Paradise west-side lots was set directly into bare concrete, and desert soil movement has cracked and lifted it. The result is rack-and-pinion binding that looks like an operator fault but is really a footing failure.
- Shared driveways with no swing clearance. Plenty of Paradise properties can’t fit a swing gate between the parked cars and the property line, so the slide gate stays – boxed in between block pillars with restricted working space. We plan the repair around tight access so the vehicle lane stays passable.
- Heat-cooked control boards and photocells. 115°F-plus Paradise summers kill control boards, gate operator motors, and photo-eye sensors before the steel even thinks about failing. Dust and wind storms then jam the rollers and hinges on top of it.
- Failed hinge posts and out-of-square frames. On 1970s-80s gates, sag almost always traces back to the hinge post footing. A panel that’s out of square needs custom welding, not a new motor.
Pricing for Gate Parts & Welding in Paradise, NV
Here’s what gate parts and welding work typically runs in Paradise. These are real ranges for this market, not ballpark guesses:
- Hinge replacement: a typical hinge replacement in Paradise runs $150-$375 per gate, depending on hinge count and whether the post needs attention.
- Post replacement: a typical post replacement in Paradise runs $450-$1,400, driven by footing depth, whether concrete has to be cut, and access.
- Rail repair: a typical rail repair in Paradise runs $200-$600, depending on how far out of line the track has drifted.
- Custom welding: a typical custom welding job in Paradise runs $250-$900, depending on fabrication complexity and finish.
- Gate rollers and latch hardware: a typical roller or latch swap in Paradise runs $95-$260.
What moves the number: whether the slab has heaved, how tight the working space is, and whether the operator also needs work. The price is quoted and agreed before any work starts – no surprises on the bill. We’ll give you a free second opinion on any written estimate you already have, and there’s $50 off any repair over $250, plus a permanent 5% senior and veteran discount.
See the difference
Before
After
Before
After
Before
AfterThe Real Culprit on Paradise West-Side Slide Gates
Paradise’s west-side 1970s and 1980s tract lots were built with slide gates whose tracks were set directly into bare concrete driveway slabs. Decades of desert soil movement have heaved and cracked those slabs, so the gate binds seasonally even when the LiftMaster or Linear operator is still running fine. That’s a parts-and-welding problem, not a motor problem – and it’s why a diagnosis that starts at the operator and stops there ends up costing more than the fix should.
Here’s how a typical call goes: a slide gate drags or jumps halfway along its travel on a cracked, heaved slab in a tight shared-driveway lot where a swing gate would never clear the parked cars or the property line. A qualified local pro checks the operator, the rack and pinion, the rollers, and the hinge post before touching anything – a sagging gate usually fails at the hinge post, not in the middle. The fix is usually re-setting or replacing the post footing, straightening rails, custom-welding the frame back to square, and swapping rollers or hinges, often with the vehicle lane kept passable throughout.
On the east side of Paradise, the work splits into a different world: high-traffic security gates for resort and airport-adjacent properties, where the parts work has to happen without interrupting access. Either way, we start at the footing and work up.
We Also Serve Cities Near Paradise
We handle gate parts and welding in the communities around Paradise too – Winchester, Whitney, Spring Valley, and Enterprise. If you’re just outside the Paradise line and need a hinge, post, rail, or weld done right, call us. Our Gate Parts & Welding team covers the whole area. Learn more about Gate Parts & Welding in Paradise.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Paradise
Usually not. On Paradise’s west-side tract lots, seasonal binding is a footing and track problem far more often than an operator problem – the slab has heaved, the track has drifted, and the gate only binds when the two are in tension. We test the operator, rack and pinion, rollers, and hinge post before replacing anything, so you don’t pay for a motor you don’t need. Call (866) 623-9848 for a free estimate.
Sometimes, but not usually when the clearance is tight. On most Paradise shared-driveway lots, a slide gate is the right answer because it travels parallel to the property line and never swings into a parked car. We’ll measure the actual clearance and tell you honestly whether a swing gate fits – or whether you’re better off repairing and upgrading the slide gate you already have. Call (866) 623-9848 for a free measure and a written price.
A new post, nearly always. A sagging gate usually fails at the hinge post, not the panel itself, so replacing the panel without correcting the post fixes it twice. We check the footing first; if the post is true and the panel is out of square, custom welding gets the frame back where it belongs. Call (866) 623-9848 for a free estimate.
Yes – any automatic vehicular gate should have working entrapment protection, typically photo-eye sensors or safety edges, and we won’t leave a gate operating without it. In Paradise’s heat, the photocells and control boards fail before the steel does, so we test them on every automation-related call. Call (866) 623-9848 and we’ll check the safety edges and sensors on your gate.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On welding and parts jobs we coordinate with the operator brand so the mechanical fix and the automation stay in step – the correct fix happens on the first visit. Call (866) 623-9848 for a free estimate on your gate.
Call Ironworks Gate Co. Summerlin for Gate Parts & Welding in Paradise
Whether it’s a hinge on a 1970s tract gate or a post footing on a tight shared driveway, we diagnose it correctly and quote it honestly before we touch a bolt. A live person answers every call at (866) 623-9848, 24 hours a day. Free estimate on any job.
Standing offers: $50 Off Any Repair Over $250 · Free Second Opinion on Any Written Estimate · $89 Seasonal Tune-Up · Senior and Veteran 5% discount, always.
Written by the team at Ironworks Gate Co.