Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Las Vegas
If your driveway gate is dragging, sagging, or won’t latch, the fix usually comes down to a hinge, a post, or a weld. Gate parts and welding work in Las Vegas is our whole trade: we repair the metal, reset the posts, and re-hang gates throughout the valley so they line up and swing true again. We know what the desert does to iron and steel here, from the sand that packs into tracks to the caliche that throws a post off-kilter after a storm. Call (866) 623-9848 – a live person answers, and most Las Vegas jobs get done in one visit at a price you agree to before we start.
Why Ironworks Gate Co. Summerlin Is Las Vegas’s Preferred Gate Parts & Welding Company
We’ve been working gates in and around Las Vegas long enough to know the difference between a hinge that needs adjusting and a post that needs resetting. Our technicians have up to 13 years of experience, and they’re background-checked and uniformed on every job. We’re licensed and insured, and every repair is covered by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no arguing. That’s the standard we’ve held for over 42 years.
The response is the part customers notice first. We answer the phone 24 hours a day, 7 days a week, and we aim to get to Las Vegas properties fast, especially when a gate is stuck open. While generalist handymen and one-truck outfits come and go, we’ve built our work on welding craft and certified automation expertise across nine opener brands. It’s a square deal: upfront pricing, no surprises on the bill. Our technicians have the parts and skills to handle most jobs on the first visit.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Las Vegas
Hinge Replacement
Sun-baked hinges are one of the most common failures in Las Vegas. We swap out worn, grinding hinges for heavy-duty replacements and re-hang the gate leaf so it swings flat. When hinges are binding because the post has leaned, we deal with the post too, or the new hinges will wear out just as fast. Expect a full hinge replacement in Las Vegas to run about $150 – $350 depending on gate weight and how many hinges.

Post Replacement
Our caliche and expansive clay soil causes posts to shift after a monsoon downpour, and a leaning hinge post drags the whole gate out of square. We dig out the old footing, set a new post, and brace it so the gate lines up again. Post replacement in Las Vegas typically runs $400 – $900, more if the post is set into a block wall or shared with an HOA entrance.

Rail Repair
Rails take a beating from wind-blown dust and heat cycling. We straighten bent rails, repair rusted joints, and get the gate closing square again. If a weld has cracked at a rail joint, we clean it back to bare metal and re-weld it properly rather than smearing on filler. A typical rail repair in Las Vegas runs $200 – $500.

Custom Welding
Some gates need more than a patch. We do custom welding for repaired frames, new brackets, and reinforcement where a stress point keeps cracking. Most jobs are done in a single visit when the fabrication is straightforward. Custom welding on a residential gate in Las Vegas usually runs $250 – $800. This is the part of our Gate Parts & Welding work that keeps older gates hanging on.
Trusted Brands We Service in Las Vegas
We’re trained and equipped on nine leading gate-automation brands, so we can diagnose the operator on your driveway quickly. That includes Mighty Mule, LiftMaster, FAAC, and BFT systems, all common around Las Vegas homes. We don’t claim to keep parts stock locally – we identify the failure on site and get the right part ordered or fabricated. Most repairs are still finished in one visit. If you need a second opinion on a written estimate, that’s free, and it’s worth having before you replace a board you might not need.
Common Gate Parts & Welding Problems We See in Las Vegas Homes
Here’s what actually goes wrong with gates in this valley, which is less about wood rot and more about metal fatigue and motion:
- Sand-packed slide tracks after a dust storm. Wind-driven grit packs into rack-and-pinion tracks and burns out the operator gearbox. We clean the track and check the operator before it fails completely.
- Heat-cooked control boards. Metal operator enclosures hit 140°F or more in a Las Vegas summer. Capacitors bulge and boards fail, often taking keypad entry and loop detectors with them.
- Sagged hinge posts in caliche soil. A monsoon downpour can undercut a footing and lean the post, so the gate sags and the hinge and operator strain. We reset posts that have shifted.
- Cracked welds on older gates. Gates hung before modern safety standards were common often have welds that have cracked under decades of heat cycling. We re-weld joints properly rather than fill them.
See the difference
Before
After
Before
After
Before
AfterA Word on Northwest Las Vegas HOA Failures
If you live in 89134 or 89144, you may have noticed cluster failures: several operators on the same street all quit around the same week. That’s because every operator on the block sits in an identical metal box and bakes through weeks of 105°F-plus heat. When the control boards cook, the whole street fails together. It’s more efficient to replace a street’s worth of failing operators as a group than to patch them one at a time. A typical call involves a 15- to 20-year-old LiftMaster or DoorKing operator on a swing gate that won’t respond. The control board is often obsolete, with capacitors bulging from years of heat. The gate sags because the hinge post has shifted in caliche soil. A qualified technician assesses the post footing and hinge hardware first, then decides whether a retrofit board or a full operator replacement is the better spend, while confirming the safety sensors still work.
Pricing for Gate Parts & Welding in Las Vegas, NV
Honest pricing matters before the work starts. Here are the ranges we see for gate parts and welding in Las Vegas:
| Service | Typical Range in Las Vegas |
|---|---|
| Hinge replacement | $150 – $350 |
| Post replacement | $400 – $900 |
| Rail repair | $200 – $500 |
| Custom welding | $250 – $800 |
The job is quoted and agreed before we turn a single bolt, so you won’t find a surprise on the invoice. What drives cost is gate weight, whether we’re resetting a footing, and access. Estimates are free. Right now, we take $50 off any repair over $250, and we offer a free second opinion on any written estimate. We also have an $89 seasonal tune-up and a permanent 5% senior and veteran discount. Call (866) 623-9848 for an exact quote.
We Also Serve Cities Near Las Vegas
Our gate repair and welding work covers the whole valley, not just the city. We serve homeowners in Winchester, North Las Vegas, Sunrise Manor, and Paradise, along with everyone inside Las Vegas. If you’re in a nearby neighborhood, we can get out to you too. See our Gate Parts & Welding in Las Vegas page for more, or just call and tell us where you are.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Las Vegas
It depends on the operator. We check if a retrofit control board is still available for your model. A retrofit makes sense when the motor and gearbox are sound and only the board has failed. When the board is obsolete and there’s no retrofit, or the motor is also worn, replacing the whole operator is often cheaper in the long run. Call (866) 623-9848 for a free estimate.
The giveaway is a post that leans or a gate that binds even when new hinges are on. If the footing has shifted in las Vegas’s caliche soil, new hinges will just wear out again. We check the footing first. If the post is solid, adjusting the hinges is a quick fix. If it’s shifted, we reset the post. Call (866) 623-9848 for an exact quote.
The most common cause is sand and grit packed into the rack-and-pinion track. The operator strains against it and can burn out its gearbox. We clean the track and check the operator before it fails altogether. Call (866) 623-9848 – estimates are free.
Heat-cooked control boards. In 89134 and 89144, identical operators sit in identical metal boxes and cook through weeks of 105°F-plus heat. When one board fails, the whole street’s boards tend to fail together. We can assess several operators at once and get the group back in order. Call (866) 623-9848.
Most likely yes. Gates hung before modern safety standards often have no photocells or loop detectors. Current codes call for sensors that stop the gate when something is in the path. We can add working sensors to an older operator as part of a repair. Call (866) 623-9848 for a free estimate.
Ready to get your gate closing right again? Call (866) 623-9848 for a free estimate. A live person answers 24 hours a day, 7 days a week, and we’ll give you honest pricing before any work starts.
Written by the team at Ironworks Gate Co.