Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Paradise
If your gate has stopped closing, is dragging through part of its travel, or trips its safety sensors for no clear reason, we can help. Our Gate Repair team handles electric and automatic gate failures, hinge and post damage, realignment, lock repair, and welding across Paradise, and we answer the phone any hour of the day or night at (866) 623-9848. Paradise is an unusual service area: there’s no true acreage here, just a long unincorporated urban strip defined by the Las Vegas Strip corridor and Reid airport, with mid-century and 1970s-90s subdivisions pinned between them. That means the rural-entrance problems show up in commercial places instead, at long resort, back-of-house, and airport-adjacent driveways where mains power is impractical and a wide slide gate has to carry the load on a solar operator.
Why Ironworks Gate Co. Summerlin Is Paradise’s Preferred Gate Repair Company
Our background-checked, uniformed technicians work to the K.E.Y.S. values code – Krafted right, Every time, Your home first, Standing behind it – and our technicians have up to 13 years of experience reading a failing gate against the ground it sits on. Most Paradise jobs are completed in a single visit, and the price is settled and agreed before a single bolt is turned.
Every completed job in Paradise is protected by our 90-Day Done Right Promise: a written guarantee with no paperwork and no arguing. If it isn’t right, we come back and make it right. We answer the phone live 24 hours a day, 7 days a week, and we are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule, so the correct fix is made on the first visit.
Paradise customers tell us the same things: they want the job done once, done correctly, and guaranteed in writing. We’re not the lowest bid, and we don’t pretend to be. A square deal means an upfront price and no surprises on the bill.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Paradise
Electric Gate Repair
When a Paradise electric gate stops mid-travel, the operator often isn’t the problem. A technician checks the slab, the hinges, the control board, and the photo-eye sensors together before recommending a motor. Extreme heat (115°F-plus summers cook control boards and sensors here) and seasonal dust and wind storms jam tracks and hinges, turning a healthy operator into an intermittent no-close call.

Gate Realignment
A gate that drags or binds partway through its travel is usually a realignment job, not a replacement. The classic instance is a 1970s-80s west-side tract slide gate whose original track was set into a bare concrete slab that has since heaved and cracked from desert soil movement. We do sag correction and realignment or reset the track rather than replace a motor that’s still working.

Hinge & Post Repair
The most common cause of a sagging gate in Paradise is a hinge post that has shifted at its footing. Monsoon rain pools water at driveway gate footings, and that corrosion combined with desert soil movement loosens posts over time. We check the post footing for movement and correct it as part of the hinge repair.

Lock Repair and Weld & Rust Repair
Wrought iron, tubular steel, and block-pillar gate systems are the norm across Paradise’s post-1960s tract housing, and original operators are often on their second or third motor. Lock repair and weld and rust work restore the latch, hinges, and frame so the gate closes square again.
Trusted Brands We Service in Paradise
Our technicians are trained and equipped to service nine leading gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule, plus Linear, Viking, Ghost Controls, DoorKing, and Elite. That range matters on Paradise’s commercial and airport-adjacent properties, where security and access gates run different manufacturers than a typical west-side driveway. We don’t stock parts on trucks – we diagnose correctly on the first visit, source what’s needed, and typically complete the job in a single return trip.
Common Gate Repair Problems We See in Paradise Homes
- Tracks set into a cracked concrete slab. On 1970s-80s west-side tract streets, the original slide-gate track was set into bare concrete that has since heaved and cracked. The gate racks and drags seasonally even when the operator and control board are fine.
- Heat-cooked operators and sensors. Summer heat above 115°F degrades control boards and photo-eye sensors, producing intermittent no-close calls and false safety trips. The operator isn’t necessarily bad – the electronics around it are.
- Dust and wind jammed hinges and tracks. Seasonal dust and wind storms pack grit into hinges and track rollers. Left alone, that grit accelerates wear and turns into a gate that won’t fully close.
- Corroded hinge post base. Monsoon rain pools water at driveway gate footings. Over time the hinge post base corrodes and shifts, so the gate sags and binds.
A typical Paradise residential call is a west-side tract slide gate that binds partway through its travel while the operator still runs. A qualified local pro reads the symptom against the slab, checks the hinge post and post footing for movement, then does sag correction and realignment or resets the track rather than replacing a healthy operator. On the commercial side, the same failure pattern shows up as a swing or slide gate that won’t fully close because heat-cooked safety photocells and dust-jammed hinges trip the entrapment protection under UL 325.
Pricing for Gate Repair in Paradise, NV
Paradise gate repair typically runs in these ranges, and the price is quoted and agreed before any work starts.
| Service | Typical Paradise Range |
|---|---|
| Electric or automatic gate repair | $180-$420 |
| Gate realignment / track reset | $220-$550 |
| Hinge & post repair | $250-$600 |
| Lock repair | $150-$350 |
| Weld & rust repair | $200-$500 |
Cost is driven by the slab condition, post footing movement, whether the track can be reset or must be replaced, and commercial versus residential access. Estimates are free, and we offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount. Call (866) 623-9848 for an exact quote.
We Also Serve Cities Near Paradise
Along with Gate Repair in Paradise, we cover Winchester, Whitney, Spring Valley, and Enterprise. Local knowledge carries between them, so a nearby job gets the same diagnosis and the same written guarantee.
See the difference
Before
After
Before
After
Before
AfterCan a Paradise commercial property run a gate operator on solar power?
Yes. Solar gate openers are a practical fit for long resort, airport-adjacent, and back-of-house commercial driveways in Paradise where running mains power is impractical or costly. A wide slide gate under heavy use will draw down a weak battery or undersized panel, so sizing the solar kit to the gate’s weight and duty cycle matters. Call (866) 623-9848 for a free estimate.
Why does my Paradise slide gate bind in summer even though the motor still runs?
Your gate binds in summer because the original track set into a bare concrete slab has heaved and cracked from desert soil movement, so the gate racks and drags as temperatures shift. The operator is fine; the running surface and post alignment are the problem. A realignment or track reset usually solves it. Call (866) 623-9848 for an exact quote – estimates are free.
What is the most common cause of a sagging gate in Paradise?
A hinge post that has shifted at its footing is the most common cause, usually after monsoon rain pools water at the base and desert soil movement loosens it. We check the post footing for movement and correct it as part of hinge repair. Call (866) 623-9848.
Why do my gate’s photo-eyes keep tripping in Paradise?
Heat-cooked photo-eye sensors and dust-jammed hinges are the usual culprits. Summer heat above 115°F degrades the sensors, causing intermittent no-close and false safety trips under UL 325. Call (866) 623-9848 – estimates are free.
Which gate operator brands can be serviced in Paradise?
We service nine leading gate-automation brands, including LiftMaster, FAAC, BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, and Elite. Call (866) 623-9848 – back-of-house commercial and residential jobs are both covered.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Contact Us for Gate Repair in Paradise
Whether it’s a Strip-corridor commercial gate that won’t close or a west-side tract gate that binds every summer, we can help. A live person answers at (866) 623-9848 any hour. The price is quoted and agreed before any work starts, and every job carries our written 90-Day Done Right Promise. Call us today for a free estimate on your gate repair in Paradise.
Written by the team at Ironworks Gate Co.