Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Henderson
If your driveway gate stalls halfway, drags on its track, or won’t answer the remote, we can help. We work on gate motors and openers across Henderson, from the older blocks near the original downtown in 89015 and 89002 out to Anthem, Seven Hills, and the MacDonald Ranch corridor in 89052. Our technicians have up to 13 years of experience, they carry the control boards and hardware for the brands that actually sit on Henderson driveways, and we answer the phone with a live person day or night. Call (866) 623-9848 and we’ll get a real answer, not a voicemail box.
Why Ironworks Gate Co. Summerlin Is Henderson’s Preferred Gate Motor & Opener Company
Henderson homeowners call us because we know the terrain as well as the trade. Green Valley, Seven Hills, and Anthem are full of iron and vinyl gates from the 1990s and 2000s, and the operators on them are usually original. When a motor goes down, the fix is rarely just a new head unit. It’s a control board matched to an aging 120V circuit, a rack and pinion cleared of caliche grit, or a post footing that moved after a monsoon. We look at all of it.
People in Henderson call rather than click, and they remember the last contractor who let them down. So we settle the price before a bolt is turned, and every job carries our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right, no arguing, no paperwork chase. Background-checked, uniformed technicians show up for every call, working in your home the way they’d work in their own mother’s.
You’ll reach a live person at any hour, and you won’t be handed off to a callback queue. If you’re curious about the full scope of what we handle beyond motors, our Gate Motor & Opener team covers repair, installation, access control, and welding on the same visit wherever possible. We serve Gate Motor & Opener in Henderson and the neighborhoods around it, and we’ve built our reputation on doing the job once.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Henderson
Motor Installation
A new operator is measured, ordered, and scheduled, not rushed in the same day. In Henderson’s tight-lot subdivisions, we size the motor and plan the mounting around the actual clearance on your driveway, not a textbook swing arc. We confirm the 120V run is serviceable before the new head unit goes on, so you’re not paying twice. A typical motor installation in Henderson runs $900-$1,800 depending on the gate type, weight, and whether the electrical feed needs attention. Then we schedule the install and hand you a written price.

Motor Repair
When a gate stalls, grinds, or trips its overload, the cause is often mechanical before it’s electrical. We check the rack and pinion, the rollers, the safety photocell, and the loop detector, then test entrapment protection under UL 325 before recommending a control board or a replacement. Most repairs in Henderson finish in a single visit, with the price agreed up front. Repair service calls in Henderson commonly run $180-$420. Call (866) 623-9848 and we’ll come out, diagnose it honestly, and quote you a square price before we touch a thing.

Linear Motor Service
We’re trained on nine major automation brands, and Linear is one we see often on Henderson slide gates. These units are dependable but not immune to Mojave sun and wind-blown grit, and a Linear that keeps reversing usually needs a sensor cleared or a board replaced rather than a whole new operator. We service and repair Linear heads rather than defaulting to replacement, which saves most homeowners money.

Slide Motor & Battery Backup
Slide gates are the workhorse in Green Valley and Seven Hills, where a swing gate simply won’t clear the driveway. We repair and replace slide operators, tune the rack and pinion, and confirm the post footing is plumb before any new motor goes on. Adding battery backup keeps your gate working through a power cut, which matters in the middle of a summer storm. Battery backup and slide motor work in Henderson typically runs $250-$700.
Trusted Brands We Service in Henderson
We’re trained and equipped on nine gate-automation brands, including LiftMaster, Linear, FAAC, BFT, and Mighty Mule, plus Viking, Ghost Controls, DoorKing, and Elite. That range matters in Henderson, where a single street can hold a 2000s-era LiftMaster next to a newer Mighty Mule DIY install. We don’t claim to stock every part on a shelf, but our techs know these systems well enough to diagnose the right fix on the first visit and get the correct board or hardware ordered without guesswork. If your brand isn’t listed, call us and we’ll tell you straight whether we can help.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Henderson Homes
- The operator stalls mid-travel. On Desert-landscape lots, this is often the original 2000s-vintage head unit on a 120V run that’s baked through years of Mojave sun. A qualified tech separates the mechanical from the electrical before recommending a fix.
- Rack and pinion packed with caliche grit. Wind-blown desert grit works into the rollers and the rack, and the motor strains and trips its overload. A proper cleaning and re-tension usually restores smooth travel.
- Post footing heaving after a monsoon. Henderson’s expansive desert soils shift when they get rare heavy rain, throwing a slide gate out of plumb and stressing the motor. The post needs attention before the motor does.
- Aging 120V circuits and control boards. In Anthem and Seven Hills, the operator and its feed are often as old as the house. We confirm that run is still serviceable before a new head unit goes on, so you don’t inherit a problem.
Pricing for Gate Motor & Opener in Henderson, NV
We quote a real number before work starts, and the bill matches it. A typical slide-motor replacement in Henderson runs $650-$1,400. A standard swing-gate operator replacement runs $900-$1,800. Control board and sensor repairs commonly land at $180-$420, and battery backup adds $250-$700 depending on the operator. What pushes cost up is the gate’s weight and type, whether the 120V feed needs work, and whether the post footing has to be reset. Every price is agreed before a bolt is turned. Call (866) 623-9848 for a free estimate, and if you’ve got another written quote, we’ll give you a free second opinion on it.
We Also Serve Cities Near Henderson
Our Henderson work reaches well past the city line. We also take care of gate motors and openers in Boulder City, Whitney, Paradise, and Enterprise, and the same 90-Day Done Right Promise applies wherever the job is. If you’re just outside Henderson and wondering whether we cover your street, call and ask. We’ll tell you honestly.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Henderson
Yes, in most cases a slide gate operator is the right answer when a swing gate won’t clear your driveway, and we plan the rack and pinion run around the restricted working space rather than forcing a swing. In Green Valley and Seven Hills, tight-lot subdivisions often leave no room for a swing arc, so a slide gate sized to your opening is the practical fix. We’ll measure, confirm it fits, and quote a written price before anything is ordered. Call (866) 623-9848 for a free measure.
A gate that stalls halfway is usually fighting two things: an aging operator and mechanical drag. The original 2000s-era head unit on a 120V run can weaken after years of Mojave sun, and caliche grit packed into the rollers and rack makes the motor strain until it trips its overload. A tech separates the mechanical from the electrical to find the real cause. Call (866) 623-9848 and we’ll diagnose it, quote you a price, and tell you straight whether it’s a repair or a replacement.
Yes, an automatic gate operator should have working entrapment protection, and our techs test the safety photocell, loop detector, and reversing functions against UL 325 standards on every service call. Missing or failed protection is a real safety issue, not a formality, on both slide and swing gates. We’ll confirm yours is working and fix anything that isn’t. Call (866) 623-9848 for a check.
Not necessarily. A loose post after heavy rain is usually the footing shifting in Henderson’s expansive desert soils, which throws a slide gate out of plumb and stresses the motor. Fix the post and the motor may run fine. We diagnose the whole gate before recommending a replacement, and we’ll tell you what actually needs fixing. Call (866) 623-9848 for a free estimate.
Yes, we confirm any replacement iron matches the HOA-approved style and powder-coat color, so you don’t end up with a re-do and an HOA letter. In Anthem and MacDonald Ranch, the community standards can require the exact original style, so our techs carry paint-matching chips and work to the approved finish. Getting it right the first time saves you the paperwork. Call (866) 623-9848 to talk through your gate.
If your gate motor is stalling, your remote won’t respond, or you’re planning a slide gate for a tight Henderson driveway, call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. A live person answers day or night, the price is settled before work starts, and every job is backed by our 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co.