Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Henderson, NV
We provide independent Ghost Controls gate repair across Henderson, NV, from the 1990s and 2000s subdivisions of Green Valley and Anthem to the older blocks near downtown in 89015. Every repair is quoted and agreed before a single bolt is turned, and we are not affiliated with, authorized by, or endorsed by Ghost Controls – we simply service what is already on your driveway. Call (866) 623-9848 and a live person answers, any hour.

Why Henderson Residents Choose Us for Ghost Controls Service
Ghost Controls operators are built for exactly the kind of low-voltage iron and vinyl gates that line Henderson driveways, and we work on them every week. Our technicians have up to 13 years of experience, are background-checked and uniformed, and are trained and equipped on nine gate-automation brands, with Ghost Controls service as one of the ones we know best. We carry OEM-compatible boards, arms, and battery harnesses to the job, and we use quality aftermarket hinges and rollers for the ironwork itself. We will be there when we say, and if a repair is not right, our written 90-Day Done Right Promise means we come back and make it right with no paperwork and no arguing. Whether your gate is in Seven Hills or a mid-century block off Water Street, the fix is the same standard.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Henderson
Most Ghost Controls calls in Henderson come down to one of five failure patterns, and each one has a local cause behind it:
- Control board failure from heat and voltage spikes. This shows up most in 2000s-era Anthem and Seven Hills installs where the original 120V run is past its service life and the operator’s surge protection has degraded. Repeated brownouts and 110°F+ afternoons finish the job on a board that has already been stressed for a decade.
- Battery backup no longer holding a charge. After several brutal summers, the backup battery in a Ghost Controls unit sags under load. The gate stalls or behaves erratically during a brief power interruption, and the battery reads fine until you put real weight behind it.
- Limit switch drift and arm binding on older single-swing units. Wind-blown caliche grit works into the hinges and rollers, resistance climbs, and the operator fights the gate until the arm drifts out of alignment. Left alone, that resistance turns into a board failure.
- Solar panel and charging-circuit underperformance. On solar-equipped Ghost Controls units, a dust film and UV-degraded panel quietly starve the charging circuit, producing low-battery faults that look like a bad battery but start at the panel.
- Hinge and post damage from expansive desert soils. Rare but real monsoon downpours undercut and heave posts set in the area’s caliche-heavy ground, so a sagging gate often traces back to a post, not the operator.
A typical call involves a Ghost Controls Heavy-Duty Single Swing operator in an HOA-governed Henderson subdivision where the gate opens partway and reverses, or fails to close on hot afternoons. The usual cause is a degraded control board or a battery backup that no longer holds under load, compounded by stiff hinges from caliche grit and sun-baked lubrication. A qualified technician typically tests the operator’s board and battery, inspects and lubricates the hinge points, verifies the 120V supply and solar charging if equipped, then replaces the failed board or battery and realigns the arm so the gate cycles smoothly within the HOA-approved hardware.
Ghost Controls Service in Henderson: What Local Conditions Mean for Your Equipment
Henderson’s master-planned communities – Green Valley, Anthem, Seven Hills, and the MacDonald Ranch corridor in 89052 – are HOA-governed desert-landscape properties where driveway and side-yard gates have to match the community’s approved ironwork and color. That shapes Ghost Controls work here in a way it does not in most neighboring cities. In the 2000s-era Anthem and Seven Hills builds, a Ghost Controls operator is often paired with an original wrought-iron gate whose powder-coat color is no longer stocked. Replacing a hinge, an arm, or a damaged gate section turns into a paint-matching exercise before the work is signed off, because a mismatched panel draws an HOA letter, not just a callback. Relentless Mojave sun bakes that powder-coat into a chalky finish and single-digit humidity shrinks vinyl and wood, so matching the faded original is part of getting the repair accepted. Call (866) 623-9848 for a free estimate.
Ghost Controls Models & Products We Service in Henderson
We service the full Ghost Controls line you are likely to find on a Henderson driveway: the Heavy-Duty Single Swing (TSS1), the Dual Swing (TDS2), the Solar-Efficient Series (TS1), and the Architectural Series (TSS1-ARCH). We use OEM Ghost Controls control boards, arms, and battery harnesses where they are available to preserve compatibility, and quality aftermarket hinges and rollers for the ironwork. Parts are sourced per job rather than pulled from local stock, so we order the correct board or battery for your model and bring it to the scheduled visit. If the operator’s chassis and motor are sound, a board or battery replacement is usually the honest call; when multiple boards have failed and the 120V feed is marginal, we will discuss replacement instead of repeated repairs.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Henderson
Ghost Controls gate repair in Henderson typically runs a few hundred dollars depending on the part and the access, and you get a firm quote before we start. The price depends on which part failed (board, battery, arm, or hinge), whether the gate needs realignment or post work, whether a solar charging circuit is involved, and whether HOA powder-coat matching is required. Here is what a free estimate covers:
- A full inspection of the operator, board, battery, and charging circuit
- A check of the 120V supply and the hinge and post condition
- A written, upfront price agreed before any work begins – no surprises on the bill
- A clear repair-versus-replace recommendation with the reasoning behind it
Standing offers apply here too: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (866) 623-9848 for an exact quote – estimates are free.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Henderson
It is most often the battery backup failing under load, sometimes combined with a degrading control board, and the afternoon heat is what tips it over. We test both before recommending a part. Call (866) 623-9848 and we will get a technician out to confirm.
We work to match it, and we flag it up front, because the original color on a 2000s-era gate is frequently no longer stocked. Matching is part of the job in HOA communities like Anthem and Seven Hills, not an afterthought. Call (866) 623-9848 to talk through your gate before we schedule.
A dust film on the panel and UV degradation of the cells usually starve the charging circuit, so the panel is producing less than it looks. Dust is constant in Henderson’s desert air, and a panel that has baked for years loses output slowly. Call (866) 623-9848 for a free estimate on the fix.
If the chassis and motor are sound, a board or battery replacement is usually worth it and saves you money. If multiple boards have failed and the 120V feed is marginal, replacement is the more honest call, and we will tell you plainly which side you are on. Call (866) 623-9848 to get a technician’s read.
Yes. Most of the Ghost Controls units we see in Henderson were installed by a builder or another company, and that makes no difference to us. We are an independent service provider, not authorized or partnered with Ghost Controls, and we service what is already installed. Call (866) 623-9848 for a free estimate.
Service Areas Near Henderson
Along with our Henderson service area, we cover nearby communities including Boulder City and Whitney, plus Summerlin, Spring Valley, and Enterprise. If your gate is just outside these lines, call and we will tell you straight whether we can get to you.
Book Your Ghost Controls Service in Henderson Today
When your Ghost Controls gate fails to close or behaves oddly in the heat, we’re ready to get it done right and back it in writing. A live person answers 24 hours a day, 7 days a week, and same-day availability is often possible for repairs. Call (866) 623-9848 for a free estimate.
Written by the team at Ironworks Gate Co.