A Ironworks company - serving Summerlin, NV
Gate Parts & Welding in Henderson, NV | Ironworks Gate Co. Summerlin

Gate Parts & Welding in Henderson - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Henderson

If a hinge has torn loose, a post has heaved, or a weld has cracked through, we can help. Ironworks Gate Co. Summerlin handles gate parts and welding for Henderson homeowners, and we know these gates: the wrought-iron and vinyl driveways of Green Valley, the RV gates off the 89015 blocks, the sliding gates on tight side yards in Anthem and Seven Hills. Tight lots are the norm here, and we plan the work around your access, not against it. Call (866) 623-9848 and a live person picks up, day or night.

Call (866) 623-9848

Why Ironworks Gate Co. Summerlin Is Henderson’s Preferred Gate Parts & Welding Company

Henderson homeowners tend to keep the gate they have. We respect that. Our technicians bring up to 13 years of experience to each job, and they’re background-checked and uniformed, working in your yard the way they’d work in their own mother’s. Most repairs are finished in a single visit, with the price settled before a bolt is turned.

What sets us apart on this side of the valley is the welding and the parts work done together: we correct the footing and alignment, replace the worn hardware, and match the replacement ironwork to your community’s approved finish. That last step is what keeps the HOA letter out of your mailbox. Every job carries our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No arguing, no paperwork.

We’re trained on nine gate-automation brands, so when a repair touches the operator – safety photocells, control boards, low-voltage wiring – we handle it rather than hand it off. A live person answers every call to Henderson, 24 hours a day, 7 days a week.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Henderson

Hinge Replacement

A gate that sags at the hinge usually has a hinge-post problem underneath, especially on Henderson’s expansive desert soils where footings heave and shift. We check the post footing and alignment before we touch the panel, then replace worn hinges and weld reinforcement where the iron has fatigued. On older 89002 gates, rust-through at the hinge plate is common and gets cut out and rebuilt, not painted over.

Hinge Replacement

Post Replacement

When a post has rusted through or heaved out of plumb, no hinge adjustment will hold. We set a new post, correct the footing, and realign the gate so it swings or slides true again. In the tight side yards around Green Valley and the MacDonald Ranch corridor, we plan the dig and the set around restricted access so your driveway stays usable through the job.

Post Replacement

Rail Repair

Rails bend from vehicle strikes and sag from years of desert heat cycling. We straighten or replace bent rails, re-weld broken joints, and check that the gate still tracks square afterward. In Anthem and Seven Hills, a rail repair also means a finish match to the community-approved ironwork, so the fixed section doesn’t stand out from the rest of the gate.

Rail Repair

Custom Welding

Sometimes the part you need isn’t on a shelf. We weld brackets, reinforcement plates, latch mounts, and custom ironwork on site, sized to the gate in front of us. If a gate has an operator, we verify the safety photocells and loop detector function while we’re there – UL 325 entrapment protection is required, and it’s often neglected on Henderson’s aging systems. For the full scope of what we do, see our Gate Parts & Welding service page.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 623-9848

Trusted Brands We Service in Henderson

We’re trained and equipped on nine major gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule. When a repair reaches into the operator – a control board, a safety edge, a corroded keypad run – we diagnose the correct fix rather than guess at it. We don’t claim to stock parts locally; the truck carries what the job needs, and when a part has to be ordered we tell you the timeline up front. Most jobs still finish in a single visit, because the correct diagnosis happens on the first one.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Henderson Homes

  • Sagging gates with healthy-looking panels. The hinge post footing has heaved or rusted through in Henderson’s expansive desert soils. The panel and hinges can look fine while the gate droops, so the post gets checked first.
  • Chalked powder-coat and rust on original 2000s ironwork. Anthem and Seven Hills communities require the exact approved color and style. Generic black paint brings a violation letter and a re-do.
  • Derailing sliding gates blamed on the operator. Often it’s flat-spotted rollers from caliche grit and sun-baked lubricant, while the rack and pinion are fine. Replacing rollers fixes what a new motor wouldn’t.
  • Post-monsoon misalignment. The rare but real downpours undercut and heave gate posts, especially on tight Henderson lots where the swing gate has no room and the slide-gate track sits vulnerable.

Pricing for Gate Parts & Welding in Henderson, NV

What does gate parts and welding work run in Henderson? A typical hinge replacement runs $150 to $350, and post replacement runs $350 to $900 depending on footing depth and access. Rail repair usually falls between $120 and $400, and custom welding on brackets, plates, or latch mounts runs $95 to $300. Powder-coat color matching for an HOA-approved finish adds $75 to $250 to the job.

Those ranges reflect what tight Henderson lots and HOA finish requirements actually add to a job. What moves you within a range: footing condition, access to the post, and whether the operator needs attention. Your price is quoted and agreed before any work starts, so the invoice matches the quote. The estimate is free, and a written estimate from another company gets a free second opinion. Call (866) 623-9848.

We Also Serve Cities Near Henderson

We also take care of gate parts and welding for homeowners just outside town – Boulder City, Whitney, Paradise, and Enterprise. Same crew standards, same written guarantee, same live phone. If you’re a little further out, call and we’ll tell you straight whether we cover your address. You can also read more about Gate Parts & Welding in Henderson on our city page.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Henderson

Why Henderson Chooses Ironworks Gate Co. Summerlin

We set the standard for gate parts & welding in Henderson.

30-60 Min Response

Fast dispatch across Henderson. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Henderson - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez
★★★★★

"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."

Erin Sutton
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson

Ready for Gate Parts & Welding in Henderson?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Henderson.

(866) 623-9848

Request a Free Estimate in Henderson

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch