Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Paradise
If your driveway gate has started to bind, stall, or open halfway and stop, that’s usually a track, hinge, or sensor problem rather than a dead motor. Our Gate Motor & Opener crew works Paradise every week and can tell you in one visit what’s actually wrong and what it will cost to fix before any work starts. We service every opener brand on the driveway, we carry no stock we don’t have, and we answer the phone when you call. Call (866) 623-9848 and a live person will pick up, any hour.
Why Ironworks Gate Co. Summerlin Is Paradise’s Preferred Gate Motor & Opener Company
Paradise is not one kind of neighborhood, and the work isn’t either. This is a built-up unincorporated strip with no real identity blocks of its own. It’s defined by the Las Vegas Strip corridor, by Reid airport traffic, and by the mid-century-to-1990s subdivisions squeezed between them. That means a gate problem here splits two ways: high-traffic commercial and resort gates on the east side, and aging driveway and pool gates in the 1970s-80s tract homes on the west.
We know both worlds. Our technicians have up to 13 years of experience and are trained on nine gate-automation brands, so the right fix happens on the first visit whatever is hanging on your driveway. Every job is backed by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. And a live person answers the phone every hour of every day, not a voicemail box.
You’ll get an upfront price settled before a single bolt is turned, and you’ll see a background-checked, uniformed technician on every job. We work in a customer’s home the way we’d work in our own mother’s.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Paradise
We handle the full scope of gate automation, from hinge welding to keypads. Here’s what comes up most in Paradise.
Slide Motor Repair and Replacement
Slide gates are the workhorse of Paradise driveways, and slide operators take the beating. On the west-side tract streets, gate travel is short and the concrete is old, so binding and shuddering show up more than dead motors. We check the track, hinge post, and rack before we touch the operator.

Solar Gate Opener Installation
Where the mains run isn’t practical, a solar-powered operator is the right answer. Many Paradise properties with long or set-back driveways fit a solar unit and a battery backup rather than trenching a power line. We size the panel and battery to the gate span and the number of cycles you actually need, not a parts-catalog default.

Heavy-Duty Operator Upgrades
Wide farm and acreage entrances need a heavier motor and a properly sized rack. A standard residential operator on a long gate will chew through control boards. We match the motor to the span and the wind load on the gate leaf.

Motor Installation and Motor Repair
New installation and repair on Mighty Mule, LiftMaster, FAAC, BFT, and the other brands we work with. Every installation is a measured job – we survey the gate, order the right unit, and schedule it. That isn’t same-day work, and anyone who says otherwise is guessing.
Trusted Brands We Service in Paradise
We’re trained and equipped on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Paradise, where you’ll find original operators from the 1980s wedged next to newer units from a dozen manufacturers up and down the same street. We don’t stock parts locally and we don’t claim to. What we do is diagnose correctly and bring what we need to the job. If a board or motor has to be ordered, we tell you the lead time up front and hold the schedule.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Paradise Homes
- Track slab heaving and cracking. On west-side Paradise streets, the original slide-gate tracks were set into bare concrete slabs that have since heaved and cracked from desert soil movement, so gates bind seasonally even when the operator is fine. Replacing the motor without fixing the slab just means the new unit binds too.
- Extreme summer heat. With 115°F+ summers, control boards, photo-eye sensors, and motor windings cook. Intermittent failure in July is often a heat-soaked board, not a jammed gate.
- Dust and wind storms. Seasonal dust jams tracks and hinges, and the wind pushes gates against a motor that was never sized for it.
- Monsoon water at the footings. The rare but intense monsoon rains pool water at driveway gate footings, accelerating corrosion and shorting out electrical connections.
A typical Gate Motor & Opener problem in Paradise’s 1970s-80s tract housing starts when a slide gate begins to bind and shudder. The homeowner usually assumes the operator is failing, but the usual cause is a rack and pinion that’s out of alignment because the original concrete track slab has heaved from desert soil movement. A qualified local pro checks the track and hinge post first, re-levels or repairs the footing if needed, and only then tests the operator and safety photocell. In wide farm or acreage entrances, solar gate openers are common where mains power is impractical, and heavy-duty operators are sized for the longer gate span.
Pricing for Gate Motor & Opener in Paradise, NV
Prices in Paradise run a little above the national average because of the heat and the age of the housing stock. Here’s the range we quote against.
| Job | Typical range in Paradise |
|---|---|
| Slide motor repair (rack, track, sensor) | $180 – $340 |
| Slide motor replacement (operator only) | $450 – $900 |
| Heavy-duty operator upgrade for a wide gate | $900 – $1,800 |
| Solar opener and battery backup installation | $1,200 – $2,400 |
What moves the number: whether the slab needs repair, the gate span, the brand, and whether a photo-eye and safety edge are already in place. The price we quote is the price you pay. Our $89 Seasonal Tune-Up and $50 Off Any Repair Over $250 apply here, and seniors and veterans get a standing 5% discount. Estimates are free and a free second opinion on any written estimate is standard. Call (866) 623-9848.
We Also Serve Cities Near Paradise
We cover the neighborhoods around Paradise as well. If you’re in Paradise, or just over the line in Winchester, Whitney, Spring Valley, or Enterprise, our team can reach you. Same brands, same 90-Day Done Right Promise, same upfront price. Call and tell us where you are.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Paradise
Because the gate, not the motor, is the usual culprit. On Paradise’s 1970s-80s tract streets, the original track slab has often heaved from desert soil movement, throwing the rack and pinion out of alignment. A technician checks the track and hinge post first, fixes the footing if needed, and only then tests the operator. Call (866) 623-9848 for a free estimate.
Yes. A solar operator with a battery backup handles long and set-back driveways in Paradise without trenching a power line. We size the panel and battery to your gate span and daily cycle count. This is a measured, scheduled installation, not a same-day repair – call (866) 623-9848 for a free measure and written price.
At 115°F+ it shortens the life of control boards, motor windings, and photo-eye sensors, and you’ll see intermittent failures in mid-summer. A tune-up that clears dust, checks the board, and aligns the sensors goes a long way in this climate. Ask about our $89 Seasonal Tune-Up at (866) 623-9848.
Automatic driveway gates need a working safety device – a photo-eye and, on some gates, a safety edge – to stop the gate on an obstruction. A bound or misaligned gate can defeat that protection, so it’s a real safety check, not a formality. Ask us to check yours: call (866) 623-9848.
Almost always the gate and its hardware, not the operator. Sagging points to the hinge post, the rollers, or a track slab that has shifted. A motor replacement won’t fix a dragging gate. Call (866) 623-9848 for a free estimate and a straight answer on which one needs the work.
If your gate is binding, stalling, or dragging, the fix usually isn’t the most expensive one. We’ll check the track, footing, and hardware before we suggest a motor, quote the price up front, and stand behind it in writing with the 90-Day Done Right Promise. Call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate on your Gate Motor & Opener work in Paradise, and a live person will answer whenever you call – day or night.
Written by the team at Ironworks Gate Co.