Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If a hinge has torn loose, a post has heaved, or a weld has cracked through, we can help. Ironworks Gate Co. Summerlin handles gate parts and welding for Henderson homeowners, and we know these gates: the wrought-iron and vinyl driveways of Green Valley, the RV gates off the 89015 blocks, the sliding gates on tight side yards in Anthem and Seven Hills. Tight lots are the norm here, and we plan the work around your access, not against it. Call (866) 623-9848 and a live person picks up, day or night.
Why Ironworks Gate Co. Summerlin Is Henderson’s Preferred Gate Parts & Welding Company
Henderson homeowners tend to keep the gate they have. We respect that. Our technicians bring up to 13 years of experience to each job, and they’re background-checked and uniformed, working in your yard the way they’d work in their own mother’s. Most repairs are finished in a single visit, with the price settled before a bolt is turned.
What sets us apart on this side of the valley is the welding and the parts work done together: we correct the footing and alignment, replace the worn hardware, and match the replacement ironwork to your community’s approved finish. That last step is what keeps the HOA letter out of your mailbox. Every job carries our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No arguing, no paperwork.
We’re trained on nine gate-automation brands, so when a repair touches the operator – safety photocells, control boards, low-voltage wiring – we handle it rather than hand it off. A live person answers every call to Henderson, 24 hours a day, 7 days a week.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
Hinge Replacement
A gate that sags at the hinge usually has a hinge-post problem underneath, especially on Henderson’s expansive desert soils where footings heave and shift. We check the post footing and alignment before we touch the panel, then replace worn hinges and weld reinforcement where the iron has fatigued. On older 89002 gates, rust-through at the hinge plate is common and gets cut out and rebuilt, not painted over.

Post Replacement
When a post has rusted through or heaved out of plumb, no hinge adjustment will hold. We set a new post, correct the footing, and realign the gate so it swings or slides true again. In the tight side yards around Green Valley and the MacDonald Ranch corridor, we plan the dig and the set around restricted access so your driveway stays usable through the job.

Rail Repair
Rails bend from vehicle strikes and sag from years of desert heat cycling. We straighten or replace bent rails, re-weld broken joints, and check that the gate still tracks square afterward. In Anthem and Seven Hills, a rail repair also means a finish match to the community-approved ironwork, so the fixed section doesn’t stand out from the rest of the gate.

Custom Welding
Sometimes the part you need isn’t on a shelf. We weld brackets, reinforcement plates, latch mounts, and custom ironwork on site, sized to the gate in front of us. If a gate has an operator, we verify the safety photocells and loop detector function while we’re there – UL 325 entrapment protection is required, and it’s often neglected on Henderson’s aging systems. For the full scope of what we do, see our Gate Parts & Welding service page.
Trusted Brands We Service in Henderson
We’re trained and equipped on nine major gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule. When a repair reaches into the operator – a control board, a safety edge, a corroded keypad run – we diagnose the correct fix rather than guess at it. We don’t claim to stock parts locally; the truck carries what the job needs, and when a part has to be ordered we tell you the timeline up front. Most jobs still finish in a single visit, because the correct diagnosis happens on the first one.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
- Sagging gates with healthy-looking panels. The hinge post footing has heaved or rusted through in Henderson’s expansive desert soils. The panel and hinges can look fine while the gate droops, so the post gets checked first.
- Chalked powder-coat and rust on original 2000s ironwork. Anthem and Seven Hills communities require the exact approved color and style. Generic black paint brings a violation letter and a re-do.
- Derailing sliding gates blamed on the operator. Often it’s flat-spotted rollers from caliche grit and sun-baked lubricant, while the rack and pinion are fine. Replacing rollers fixes what a new motor wouldn’t.
- Post-monsoon misalignment. The rare but real downpours undercut and heave gate posts, especially on tight Henderson lots where the swing gate has no room and the slide-gate track sits vulnerable.
Pricing for Gate Parts & Welding in Henderson, NV
What does gate parts and welding work run in Henderson? A typical hinge replacement runs $150 to $350, and post replacement runs $350 to $900 depending on footing depth and access. Rail repair usually falls between $120 and $400, and custom welding on brackets, plates, or latch mounts runs $95 to $300. Powder-coat color matching for an HOA-approved finish adds $75 to $250 to the job.
Those ranges reflect what tight Henderson lots and HOA finish requirements actually add to a job. What moves you within a range: footing condition, access to the post, and whether the operator needs attention. Your price is quoted and agreed before any work starts, so the invoice matches the quote. The estimate is free, and a written estimate from another company gets a free second opinion. Call (866) 623-9848.
We Also Serve Cities Near Henderson
We also take care of gate parts and welding for homeowners just outside town – Boulder City, Whitney, Paradise, and Enterprise. Same crew standards, same written guarantee, same live phone. If you’re a little further out, call and we’ll tell you straight whether we cover your address. You can also read more about Gate Parts & Welding in Henderson on our city page.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
Yes, and it’s the part of the job worth getting right the first time. In Henderson’s master-planned communities, an unapproved repair or a mismatched paint color can trigger a violation letter and a re-do. We bring paint-matching chips and verify the approved ironwork style before any repair, then finish the replacement to match. Call (866) 623-9848 and we’ll walk through what your community requires.
Because the rollers are usually the worn part, not a lubrication problem. Henderson’s caliche grit and sun-baked lubricant flat-spot rollers, and a flat-spotted roller will jump the track no matter how much you grease it. The fix is replacing the rollers and checking the hinge post alignment. The rack and pinion are often fine. Call (866) 623-9848 for an exact quote – estimates are free.
A qualified technician can tell in one visit by testing the operator, the control board, and the low-voltage supply separately. In Anthem and Seven Hills, operators are often original to the 2000s build with 120V runs well past their service life, so the power side is worth checking before anyone replaces a motor. We handle both. Call (866) 623-9848.
Yes. Tight sites are the norm around here, and we plan the work around restricted space rather than ask you to clear a path. We set up so the driveway and pedestrian access stay working through the job, and we bring the welding and hardware to fit the space. That planning happens at the estimate, before any work starts. Call (866) 623-9848.
The hinge post footing. Expansive desert soils heave and shift, and monsoon moisture can undercut a post, so the gate sags even when the panel and hinges look sound. Checking the footing first saves you paying for hinge work that won’t hold. Call (866) 623-9848 and we’ll diagnose it on the first visit. All work is backed by our written 90-Day Done Right Promise.
Call (866) 623-9848 for a free estimate. Henderson homeowners get a live person any hour, any day, and a clear written price before any work starts. Hinge, post, rail, weld, or a finish that has to match your community’s approved ironwork – we’ll take a look, tell you straight what’s wrong, and get it done right.
Written by the team at Ironworks Gate Co.