A Ironworks company - serving Summerlin, NV
Gate Parts & Welding in Summerlin, NV | Ironworks Gate Co. Summerlin

Gate Parts & Welding in Summerlin - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Summerlin

If your driveway gate is dragging, stalling, or grinding somewhere on its travel, the problem is usually in the metal and the mounts, not the remote. We handle gate parts and welding for Summerlin homeowners from The Trails out to the estate entrances in The Ridges, and we know what this valley does to iron and steel. Summerlin sits against Red Rock, so your gate faces relentless sun, dry air, and wind that pours off the Spring Mountains. That combination works hinges, posts, and rails loose over time. Call (866) 623-9848 and a live person picks up, day or night.

Call (866) 623-9848

Why Ironworks Gate Co. Summerlin Is Summerlin’s Preferred Gate Parts & Welding Company

We’re a gate company, not a general handyman outfit, and that focus shows on every Summerlin job. Our technicians have up to 13 years of experience and are background-checked and uniformed before they ever pull into your driveway. They’re trained on nine gate-automation brands, so they understand how the operator, the panel, and the hardware pull against each other. When the fix is welded and mounted right, the opener stops fighting the gate.

Summerlin customers tend to have one thing in common: they’ve dealt with a contractor who didn’t come back. We answer for that with the 90-Day Done Right Promise, a written guarantee that if something isn’t right, we come back and make it right. No arguing, no paperwork chase. Most repair jobs finish in a single visit, and the price is settled before a single bolt is turned. That’s the standard we hold on every job, whether it’s a latch that won’t catch or a full rail replacement on a 20-foot farm gate.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Summerlin

These are the repairs that come up most on Summerlin’s decorative iron and steel gates. If you’re not sure which one you need, the team at our Gate Parts & Welding service can point you in the right direction.

Hinge Replacement

On Summerlin’s metal gates, hinge wear is the quiet cause behind most “the opener keeps faulting” calls. Heat-cycled steel and wind load work the hinge pins loose until the panel drops. We replace the hinges properly and re-check alignment so the gate swings true again.

Hinge Replacement

Post Replacement

Hinge posts set in Summerlin’s caliche-heavy soil loosen over the years, and a loose post lets even a well-hung gate sag. We set and reinforce posts so the footing, not just the hinge, carries the weight. That’s the part most quick fixes skip.

Post Replacement

Rail Repair

A bent rail on a wide Summerlin gate throws the whole panel out of alignment, and the operator grinds against it until it stalls. We straighten or replace the rail and re-level the rack and pinion so travel is smooth. On heavy acreage-style gates, rail repair has to account for operator capacity, not just the weld.

Rail Repair

Custom Welding

When a section of your Summerlin gate cracks at a welded joint, we cut, fit, and weld it to match the original design. HOA-approved ironwork has to look right as well as hold, so we match the profile and finish. Sun and heat cycling stress those joints, which is why they fail.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 623-9848

Trusted Brands We Service in Summerlin

We’re trained and equipped on nine gate-automation brands, including Viking, Ghost Controls, DoorKing, and Elite. We don’t claim to stock parts locally, but we source what your gate needs and most jobs don’t stretch beyond a visit or two. Knowing the operator means we understand what your gate’s motor can and can’t pull. That matters on Summerlin’s solar-equipped entrances, where the panel has to match the load. Fast turnaround, no guesswork.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Summerlin Homes

  • Solar opener stall faults mid-swing. Because many estate entrances in The Ridges and Red Rock Country Club run on solar gate openers, a rail repair that adds weight can push a panel past the operator’s duty rating. The gate stalls even though the weld is sound, so battery and panel sizing matter as much as the metalwork.
  • Hinge posts working loose in caliche soil. Summerlin’s soil grabs and shifts, and a hinge post that loosens lets a wide swing gate sag until the latch misses and the operator strains. The fix is at the post and footing, not a patch on the panel.
  • Desert dust packing into rollers and chains. Caliche grit blowing off Red Rock and the open lots along the 215 gets into gate tracks, rollers, and opener chains. Operators that run fine elsewhere seize or grind within a season unless the mechanism is cleaned and re-lubed for abrasive dust.
  • Cracked welds on heat-cycled steel. Relentless summer sun and wind load stress welded rail joints until they crack. Left alone, a cracked joint plus a straining opener turns a small repair into a bigger one.

Pricing for Gate Parts & Welding in Summerlin, NV

A typical hinge replacement in Summerlin runs $150 to $350, and a post replacement including the footing work runs $350 to $900 depending on how far we set it. Rail repair generally lands between $250 and $700, and custom welding runs $200 to $650 by the length and profile of the section. Wide farm gates and solar-equipped entrances sit at the higher end because the operator and panel load have to be checked alongside the weld. We quote the price and agree on it before any work starts, so the bill matches the number you were given. Estimates are free, and we honor $50 off any repair over $250.

We Also Serve Cities Near Summerlin

We work throughout Summerlin and the surrounding valley, including Spring Valley, Las Vegas, Winchester, and Paradise. If you’re just outside Summerlin’s edge, ask when you call and we’ll let you know. The same upfront pricing and written guarantee apply wherever you are.

Serving Summerlin, NV – Our Local Coverage Area

We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Summerlin

Why Summerlin Chooses Ironworks Gate Co. Summerlin

We set the standard for gate parts & welding in Summerlin.

30-60 Min Response

Fast dispatch across Summerlin. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Summerlin

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Summerlin - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Summerlin Customers Say

Trusted by homeowners across Summerlin and surrounding areas.

★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez
★★★★★

"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."

Erin Sutton
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson

Ready for Gate Parts & Welding in Summerlin?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Summerlin.

(866) 623-9848

Request a Free Estimate in Summerlin

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch